MEEPO Campus V5 Series/Envy Electric Skateboard User Manual

1. ആമുഖം

Welcome to the world of electric skateboarding with your new MEEPO Campus V5 Series/Envy Electric Skateboard. This manual provides essential information for the safe and optimal operation, maintenance, and care of your skateboard. Please read it thoroughly before your first ride to ensure a safe and enjoyable experience.

Figure 1: MEEPO Campus V5 Series/Envy Electric Skateboard (Top, Side, and Bottom Views)

2. സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ

Your safety is paramount. Electric skateboards can reach high speeds and require careful handling. Always adhere to the following safety guidelines:

• സംരക്ഷണ ഗിയർ ധരിക്കുക: Always wear a helmet, knee pads, elbow pads, and wrist guards.
• Check Your Board: Before each ride, inspect the board for any loose components, wheel damage, or battery issues.
• Understand Your Surroundings: Ride in safe, open areas away from traffic, pedestrians, and obstacles.
• നിങ്ങളുടെ പരിധികൾ അറിയുക: Start at low speeds and gradually increase as you become more comfortable.
• കാലാവസ്ഥാ സാഹചര്യങ്ങൾ: നനഞ്ഞ സാഹചര്യങ്ങളിലോ, കനത്ത മഴയിലോ, വഴുക്കലുള്ള പ്രതലങ്ങളിലോ വാഹനമോടിക്കുന്നത് ഒഴിവാക്കുക.
• പ്രാദേശിക നിയമങ്ങൾ: Be aware of and comply with all local laws and regulations regarding electric skateboards.
• പ്രായവും ഭാര പരിധിയും: This product is suitable for adults and teens. The maximum load capacity is 330 pounds.

3. പാക്കേജ് ഉള്ളടക്കം

Upon unboxing your MEEPO Campus V5 Series/Envy Electric Skateboard, please verify that all the following items are included:

• MEEPO Campus V5 Series/Envy Electric Skateboard (NLS3)
• റിമോട്ട് കൺട്രോൾ
• ചാർജർ
• T-Tool (for adjustments)
• Spare Belts (245mm)
• USB Charging Cable for Remote
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

ചിത്രം 2: ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ

4. സജ്ജീകരണവും അസംബ്ലിയും

4.1 പ്രാരംഭ പരിശോധന

Before your first ride, carefully inspect your skateboard for any signs of damage during shipping. Ensure all screws are tightened and wheels spin freely.

4.2 ബാറ്ററി ചാർജ് ചെയ്യുന്നു

• Connect the charger to the charging port on the skateboard.
• ഒരു സാധാരണ മതിൽ ഔട്ട്ലെറ്റിലേക്ക് ചാർജർ പ്ലഗ് ചെയ്യുക.
• പൂർണ്ണമായി ചാർജ് ചെയ്യുമ്പോൾ ചാർജറിലെ ഇൻഡിക്കേറ്റർ ലൈറ്റ് (ഉദാ: ചുവപ്പിൽ നിന്ന് പച്ചയിലേക്ക്) മാറും.
• ഒരു ഫുൾ ചാർജിന് ഏകദേശം 2 മണിക്കൂറാണ് ചാർജ്ജിംഗ് സമയം.

4.3 വിദൂര നിയന്ത്രണ ജോടിയാക്കൽ

Your remote control should be pre-paired. If re-pairing is needed, refer to the specific instructions in the separate remote control manual or the official Meepo webസൈറ്റ്.

4.4 Wheel and Belt Installation/Adjustment

The NLS3 model uses belts for power transmission. Periodically check the tension and condition of these belts. If replacement is necessary, follow the steps demonstrated in the video below. Ensure the wheel is securely fastened after any adjustments or replacements.

Video: How to replace 245mm belts for NLS 3. This video demonstrates the process of removing and installing the drive belts on the MEEPO NLS3 electric skateboard, including loosening and tightening the necessary screws and properly seating the new belt.

5. Operating Your Electric Skateboard

5.1 ആരംഭിക്കുന്നു

• Turn on the skateboard and the remote control.
• Ensure the remote is connected to the board (check remote display).
• Place one foot on the board, then push off with the other foot to gain initial momentum.
• Gently push the throttle on the remote to accelerate.

5.2 വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ

The N5S Display Remote allows for precise control:

• ത്രോട്ടിൽ: Push forward to accelerate, pull back to brake.
• സ്പീഡ് മോഡുകൾ: Switch between different speed modes (e.g., Beginner, Eco, Pro) to match your skill level and riding environment.
• ഡിസ്പ്ലേ: Shows current speed, battery level (board and remote), and distance traveled.

5.3 റൈഡിംഗ് ടെക്നിക്കുകൾ

• നിലപാട്: Find a comfortable stance with your feet positioned over the trucks for balance.
• തിരിയുന്നു: Lean into turns, similar to a traditional skateboard or snowboard.
• ബ്രേക്കിംഗ്: Apply brakes smoothly to avoid sudden stops. Regenerative braking helps recharge the battery.

Figure 3: Proper Riding Stance

6. പരിപാലനം

Regular maintenance ensures the longevity and performance of your electric skateboard.

6.1 ബാറ്ററി കെയർ

• Charge the battery fully after each use, especially if storing for extended periods.
• അമിതമായി ചാർജ് ചെയ്യുകയോ ബാറ്ററി പൂർണ്ണമായും കളയുകയോ ചെയ്യരുത്.
• Store the board in a cool, dry place, away from direct sunlight and extreme temperatures.

6.2 വൃത്തിയാക്കലും സംഭരണവും

• Wipe down the board with a damp cloth after each ride to remove dirt and debris.
• Avoid using harsh chemicals or excessive water, especially near electronic components.
• Store the board indoors in a dry environment.

6.3 Belt and Wheel Maintenance

• Regularly inspect drive belts for wear, cracks, or damage. Replace them as needed (refer to Section 4.4).
• Check wheels for cuts, cracks, or excessive wear.
• Ensure wheel nuts are tightened to prevent wobbling.
• Clean bearings periodically to maintain smooth wheel rotation.

Figure 4: Wheel and Motor Assembly

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your MEEPO electric skateboard, refer to the table below for common problems and solutions.

8 സ്പെസിഫിക്കേഷനുകൾ

Key technical specifications for the MEEPO Campus V5 Series/Envy Electric Skateboard (NLS3):

Figure 5: Skateboard Components and Performance Overview

9. വാറൻ്റിയും പിന്തുണയും

9.1 വാറൻ്റി വിവരങ്ങൾ

Your MEEPO Campus V5 Series/Envy Electric Skateboard comes with a limited warranty. Please refer to the official Meepo website or contact customer support for detailed warranty terms and conditions. The warranty period is typically 6 months from the date of purchase.

9.2 ഉപഭോക്തൃ പിന്തുണ

For any questions, technical assistance, or warranty claims, please contact Meepo customer support:

• ഉദ്യോഗസ്ഥൻ Webസൈറ്റ്: www.meepoboard.com
• ഇമെയിൽ: info@meepoboard.com
• തത്സമയ ചാറ്റ്: Available on the official webസൈറ്റ്.
• വിലാസം: G/f Hang Wai Indctmo 6 Kin Tai St Tuen Mun Nt Hong Kong

Meepo is committed to providing high-quality products and excellent customer service. Your satisfaction is our priority.