INSTRUKART MP-55 Oil Differential Pressure Switch User Manual

1. ആമുഖം

The INSTRUKART MP-55 oil differential pressure switch is designed as a safety device for refrigeration compressors. Its primary function is to protect compressors from damage caused by insufficient lubricating oil pressure. In the event of an oil pressure failure, the MP-55 will initiate a compressor shutdown after a predetermined time delay.

This device is suitable for use in refrigerating systems that utilize HCFC and non-flammable HFC refrigerants. Common applications include HVAC systems, various industrial processes, air conditioning plants, and general refrigerating systems.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your MP-55 pressure switch.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Improper installation, operation, or maintenance can result in serious injury or equipment damage. Read and understand all instructions before proceeding.

• Installation and service must be performed by qualified and authorized personnel only.
• Always disconnect power to the compressor and associated equipment before performing any installation, maintenance, or troubleshooting.
• Ensure proper handling of refrigerants according to local regulations and safety standards.
• Verify that the pressure switch specifications match the system requirements.
• Do not press the reset button without first identifying and rectifying the cause of the low oil pressure condition. Refer to operating instructions to avoid compressor damage.
• ഇൻസ്റ്റാളേഷനും സർവീസും നടത്തുമ്പോൾ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക.

The product label contains important safety information. Observe all warnings and instructions provided on the device itself.

ചിത്രം 1: മുൻഭാഗം view of the MP-55 Oil Differential Pressure Switch. The label clearly indicates the model type, manufacturer, and critical safety warnings regarding the reset button in multiple languages.

3. ബോക്സിൽ എന്താണുള്ളത്?

അൺപാക്ക് ചെയ്യുമ്പോൾ, എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ദയവായി പരിശോധിക്കുക:

• 1 unit of INSTRUKART MP-55 Oil Differential Pressure Switch
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

4 സാങ്കേതിക സവിശേഷതകൾ

ഫീച്ചറുകൾ:

• Fixed and adjustable differentials available.
• Extremely narrow switch differential accuracy.
• Reliable, long-life stainless steel bellows.
• Can be used for HCFC and non-flammable HFC refrigerants.

5. ഇൻസ്റ്റലേഷൻ

Installation of the MP-55 pressure switch should only be carried out by certified refrigeration technicians or qualified electricians, adhering to all relevant local and national codes and standards.

5.1 മെക്കാനിക്കൽ ഇൻസ്റ്റലേഷൻ

1. മൗണ്ടിംഗ്: Select a suitable location for mounting the pressure switch, ensuring it is protected from excessive vibration, moisture, and extreme temperatures outside its operating range.
2. പ്രഷർ കണക്ഷൻ: Connect the ¼ inch flare pressure connection to the oil pressure line of the compressor. Ensure a tight, leak-free connection using appropriate tools and sealing methods for refrigerant systems.
3. ഓറിയൻ്റേഷൻ: The switch can typically be mounted in any position, but refer to the specific markings on the unit for any recommended orientation.

Figure 2: Detail of the ¼ inch flare pressure connection. This connection point is crucial for accurate oil pressure monitoring.

5.2 ഇലക്ട്രിക്കൽ ഇൻസ്റ്റാളേഷൻ

1. വൈദ്യുതി വിച്ഛേദിക്കൽ: Ensure all power to the compressor and control circuit is disconnected and locked out before beginning electrical work.
2. വയറിംഗ്: Connect the electrical wiring to the screwed cable entry (Pg 13.5) terminals according to the system's wiring diagram. The MP-55 supports 230 V or 115 V AC or DC supply.
3. ഗ്രൗണ്ടിംഗ്: Ensure proper grounding of the unit as per electrical safety standards.
4. കേബിൾ എൻട്രി: Secure the cable entry to maintain the IP20 enclosure rating and prevent moisture ingress.

ചിത്രം 3: വശം view of the MP-55, highlighting the electrical connection area. Proper wiring is essential for safe and reliable operation.

6. ഓപ്പറേഷൻ

The MP-55 functions by monitoring the differential pressure between the compressor's oil pump discharge and the crankcase pressure. A sufficient differential pressure indicates adequate oil lubrication.

6.1 സാധാരണ പ്രവർത്തനം

During normal compressor operation, the oil differential pressure will be above the set point of the MP-55. The switch remains in a closed state, allowing the compressor to run.

6.2 Low Oil Pressure Detection and Shutdown

If the oil differential pressure drops below the set point (0.30 to 4.50 bar range), the MP-55 initiates a time delay. This delay (approximately 90 seconds) allows for transient pressure fluctuations without nuisance trips.

If the low oil pressure condition persists beyond the 90-second delay, the MP-55 will open its contacts, interrupting the compressor's control circuit and shutting down the compressor. This is a safety measure to prevent damage due to lack of lubrication.

6.3 മാനുവൽ റീസെറ്റ്

After a shutdown due to low oil pressure, the MP-55 requires a manual reset. The reset button should only be pressed after the cause of the low oil pressure has been identified and corrected. Repeatedly pressing the reset button without addressing the underlying issue can lead to severe compressor damage.

ചിത്രം 4: കോണാകൃതിയിലുള്ളത് view of the MP-55, indicating the location of the manual reset button. This button should only be engaged after troubleshooting.

7. പരിപാലനം

The INSTRUKART MP-55 is designed for reliable operation with minimal maintenance. However, periodic checks are recommended to ensure continued performance and safety.

• വിഷ്വൽ പരിശോധന: Regularly inspect the pressure switch for any signs of physical damage, corrosion, or loose connections.
• ചോർച്ച പരിശോധനകൾ: Periodically check the pressure connections for refrigerant or oil leaks.
• ഇലക്ട്രിക്കൽ കണക്ഷനുകൾ: എല്ലാ ഇലക്ട്രിക്കൽ കണക്ഷനുകളും സുരക്ഷിതവും നാശത്തിൽ നിന്ന് മുക്തവുമാണെന്ന് ഉറപ്പാക്കുക.
• പ്രവർത്തനക്ഷമത പരിശോധന: As part of routine system maintenance, verify the proper functioning of the oil differential pressure switch and its associated safety circuit. This should be done by qualified personnel.
• വൃത്തിയാക്കൽ: Keep the exterior of the unit clean and free from dust and debris. Use a dry cloth for cleaning. Do not use abrasive cleaners or solvents.

8. പ്രശ്‌നപരിഹാരം

Before attempting any troubleshooting, ensure all power to the system is disconnected. Only qualified personnel should perform troubleshooting and repairs.

If the problem persists after following these steps, contact INSTRUKART customer support or a qualified service technician.

9. ആപ്ലിക്കേഷൻ Exampലെസ്

The INSTRUKART MP-55 is versatile and finds application in various industrial and commercial settings where refrigeration compressors are used. These include:

• HVAC (Heating, Ventilation, and Air Conditioning) systems
• Industrial Refrigeration Plants
• Commercial Air Conditioning Systems
• Deep Freeze and Cold Storage Facilities

ചിത്രം 5: വിഷ്വൽ എക്സ്amples of environments where the MP-55 oil differential pressure switch is typically utilized, demonstrating its broad applicability.

10. വാറൻ്റിയും പിന്തുണയും

For information regarding the warranty period and terms for your INSTRUKART MP-55 Oil Differential Pressure Switch, please refer to the purchase documentation or contact INSTRUKART customer support directly.

If you require technical assistance, have questions about installation, operation, or maintenance, or need to report a product issue, please contact INSTRUKART customer service through their official channels. Provide your product model number (MP-55) and purchase details when seeking support.

നിർമ്മാതാവ്: INSTRUKART

മോഡൽ: എംപി-55

ASIN: B0DCTXPHHM

ആദ്യം ലഭ്യമായ തീയതി: ഓഗസ്റ്റ് 11, 2024