1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The roborock Official Floor Cleaning Solution is specifically formulated to work with roborock robotic vacuums with mopping functionality and wet/dry vacuums. This solution is designed to effectively remove dirt, grime, and sticky messes from various hard floor surfaces, leaving them clean and streak-free.
Its gentle yet powerful formula is suitable for use on hardwood, vinyl, ceramic tile, laminate floors, marble, and stone. When used as directed, it is safe for households with children and pets.
Image: The roborock Official Floor Cleaning Solution bottle, highlighting its primary use for floor cleaning.
2 സുരക്ഷാ വിവരങ്ങൾ
Please read and understand all safety information before using this product.
- ചേരുവകൾ: nonionic surfactants, detergent builder, fragrance, colorant.
- Eye Irritant: Avoid contact with eyes. In case of eye contact, flush thoroughly with water for several minutes. If irritation persists, seek medical attention.
- കുട്ടികൾക്കും വളർത്തുമൃഗങ്ങൾക്കും എത്തിപ്പെടാതെ സൂക്ഷിക്കുക: Store the product in a secure location away from children and pets. Use only as directed.
- കഴിക്കരുത്: If swallowed, do not induce vomiting. Drink a glass of water and contact a poison control center or doctor immediately.
- വെൻ്റിലേഷൻ: നന്നായി വായുസഞ്ചാരമുള്ള സ്ഥലത്ത് ഉപയോഗിക്കുക.
- സംഭരണം: നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും തീവ്രമായ താപനിലയിൽ നിന്നും അകന്ന് തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is a cleaning solution, not a dietary supplement.
3. Setup and Dilution
This cleaning solution is concentrated and must be diluted with water before use. The recommended dilution ratio is 1:200 (solution to water).
നേർപ്പിക്കാനുള്ള നിർദ്ദേശങ്ങൾ:
- Refer to the compatibility table below for the specific water tank volume of your roborock device.
- Measure the appropriate amount of cleaning solution based on the dilution ratio (1:200). For example, for 1 liter (1000 ml) of water, use approximately 5 ml of cleaning solution (equivalent to about 2/3 of a bottle cap).
- Pour the measured cleaning solution into the clean water tank of your roborock robot vacuum or wet/dry vacuum.
- Fill the remainder of the tank with clean water.
- Close the tank securely before operating your device.
Image: Visual guide demonstrating the 1:200 dilution ratio, showing approximately 2/3 cap (5ml) of solution per 1 liter of water.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
അനുയോജ്യത:
This roborock Official Floor Cleaning Solution is compatible with a wide range of roborock robotic vacuums with mopping functions and wet/dry vacuums. This product is designed exclusively for roborock devices.
Image: The roborock cleaning solution bottle positioned alongside a roborock robot vacuum and a roborock wet/dry vacuum, illustrating compatibility.
Compatible Models and Dilution Guide:
Use the table below to determine the approximate amount of cleaning solution needed for your specific roborock model's water tank capacity. Note that 1 bottle cap is approximately 8 ml.
| മോഡൽ | വാട്ടർ ടാങ്കിൻ്റെ അളവ് | Approx. Solution (1:200) |
|---|---|---|
| Q5 Pro / Q5 Pro+ | 0.18L (Body) | ~1/8 cap (approx. 1 ml) |
| Q7 / Q7+ | 0.18L (Body) | ~1/8 cap (approx. 1 ml) |
| Q7 Max / Q7 Max+ | 0.35L (Body) | ~1/5 cap (approx. 2 ml) |
| Q8 Max / Q8 Max+ | 0.33L (Body) | ~1/5 cap (approx. 2 ml) |
| S8 / S8+ | 0.3L (Body) | ~1/5 cap (approx. 2 ml) |
| S8 Max Ultra / S8 MaxV Ultra | 4L (Dock) | ~2.5 cap (approx. 20 ml) |
| എസ്8 പ്രോ അൾട്രാ | 3.5L (Dock) | ~2 cap (approx. 16 ml) |
| S7 Max Ultra / S7 MaxV Ultra | 3L (Dock) | ~2 cap (approx. 16 ml) |
| S7 MaxV / S7 MaxV Plus | 0.2L (Body) | ~1/8 cap (approx. 1 ml) |
| Roborock Qrevo | 4.2L (Dock) | ~2.5 cap (approx. 20 ml) |
| Roborock Qrevo MaxV / Roborock QrevoS | 4L (Dock) | ~2.5 cap (approx. 20 ml) |
| roborock Qrevo Plus | 4L (Dock) | ~2.5 cap (approx. 20 ml) |
| roborock Qrevo Pro | 4L (Dock) | ~2.5 cap (approx. 20 ml) |
| roborock Qrevo Master | 4L (Dock) | ~2.5 cap (approx. 20 ml) |
| ഡയാഡ് എയർ | 0.9 ലിറ്റർ (ക്ലീൻ വാട്ടർ ടാങ്ക്) | ~1/2 cap (approx. 4 ml) |
| Dyad Pro / Dyad Pro Combo | 0.9 ലിറ്റർ (ക്ലീൻ വാട്ടർ ടാങ്ക്) | ~1/2 cap (approx. 4 ml) |
| roborock Flexi Pro / roborock Flexi | 0.73 ലിറ്റർ (ക്ലീൻ വാട്ടർ ടാങ്ക്) | ~1/2 cap (approx. 4 ml) |
| roborock Flexi Lite | 0.62 ലിറ്റർ (ക്ലീൻ വാട്ടർ ടാങ്ക്) | ~1/3 cap (approx. 3 ml) |
| S5 / S6 / E3 | 0.14L (Body) | ~1/10 cap (approx. 1 ml) |
| S6 Pure / E4 Mop | 0.18L (Body) | ~1/10 cap (approx. 1 ml) |
| S5 Max / S6 MaxV | 0.29L (Body) | ~1/5 cap (approx. 2 ml) |
| S7 / S7+ | 0.3L (Body) | ~1/5 cap (approx. 2 ml) |
Table: Recommended dilution amounts for various roborock robot vacuum and wet/dry vacuum models. Note that 'Body' refers to the robot's internal water tank, and 'Dock' refers to the clean water tank in the auto-empty/wash dock.
പൊതുവായ ഉപയോഗം:
- Once the solution is diluted and added to your roborock device, operate the device according to its specific user manual for mopping or wet cleaning functions.
- The solution is effective at removing common household dirt, grime, and sticky residues.
- It is designed to clean multiple surfaces without leaving streaks or residue.
ചിത്രം: ഉദാamples of common floor messes such as spilled liquids and food, illustrating the types of stains the solution is designed to clean.
Image: Visual representation of various floor surfaces including wood, hard floor, tile, marble, and stone, indicating the solution's multi-surface compatibility.
5. പരിപാലനവും സംഭരണവും
- Bottle Care: Keep the bottle tightly capped when not in use to prevent evaporation and contamination.
- സംഭരണം: Store the cleaning solution in its original container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is stored upright.
- നീക്കം ചെയ്യൽ: Dispose of the empty bottle according to local regulations for household waste. Do not pour undiluted solution down drains.
6. പ്രശ്നപരിഹാരം
If you encounter issues while using the roborock Official Floor Cleaning Solution, consider the following:
- Streaks on Floor: Ensure the correct dilution ratio (1:200) is strictly followed. Using too much solution can lead to streaks. Also, ensure your robot's mop pads are clean.
- Insufficient Cleaning: Verify that the correct amount of solution has been added. For heavily soiled areas, a second cleaning pass or pre-treatment may be necessary.
- അസാധാരണമായ ഗന്ധം: The solution has a mild, fresh scent. If an unusual or strong odor is detected, ensure the solution has not expired and is stored correctly.
- ഉപകരണത്തിന്റെ തകരാർ: If your roborock device is not functioning correctly after adding the solution, first ensure the solution was diluted properly. Refer to your specific roborock device's user manual for troubleshooting steps related to the device itself.
For further assistance, please contact roborock customer support.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്നത്തിൻ്റെ പേര് | roborock Official Floor Cleaning Solution |
| മോഡൽ നമ്പർ | തറ വൃത്തിയാക്കൽ പരിഹാരം |
| വോളിയം | 16.2 FL OZ (480 ml) |
| നേർപ്പിക്കൽ അനുപാതം | 1:200 (Solution to Water) |
| ഫോം ഫാക്ടർ | കുപ്പി |
| ചേരുവകൾ | Nonionic surfactants, detergent builder, fragrance, colorant |
| മെറ്റീരിയൽ സവിശേഷത | Biodegradable Warning |
| പ്രത്യേക ഫീച്ചർ | Streak Free |
| നിറം | വെള്ള |
| ഉൽപ്പന്ന അളവുകൾ | 9.15 x 4.04 x 1.83 ഇഞ്ച്; 15.87 ഔൺസ് |
| നിർമ്മാതാവ് | റോബോറോക്ക് |
| ASIN | B0DDT77R9K |
8. വാറൻ്റിയും പിന്തുണയും
For information regarding product warranty, returns, or technical support, please refer to the official roborock website or contact roborock customer service directly. Ensure you have your product details (model number, purchase date) available when contacting support.
You can visit the official roborock store for more information: roborock Store
