പോളിബി ഫുൾ-ഓവർ-ഫുൾ മെറ്റൽ ബങ്ക് ബെഡിനുള്ള ഉപയോക്തൃ മാനുവൽ

ആമുഖം

വാങ്ങിയതിന് നന്ദി.asing the Polibi Full-Over-Full Metal Bunk Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bunk bed. Please read these instructions carefully before beginning assembly and retain them for future reference.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

To ensure safe use of this product, please adhere to the following safety guidelines:

• Always follow assembly instructions precisely. Do not deviate from the steps.
• Ensure all connections are tight before use. Periodically check and re-tighten hardware.
• 6 വയസ്സിന് താഴെയുള്ള കുട്ടികൾക്ക് മുകളിലെ ബങ്ക് അനുയോജ്യമല്ല.
• Use only mattresses that meet the recommended thickness and dimensions. (Recommended Bed Mattress Thickness (Upper/ Down): 4-6'' / 8'')
• Do not allow horseplay on or under the bed.
• Always use the ladder for access to the upper bunk.
• Ensure the slide is securely attached and positioned on a stable surface if in use.
• ഈ ഉൽപ്പന്നം ഇൻഡോർ ഉപയോഗത്തിനായി മാത്രം രൂപകൽപ്പന ചെയ്തിട്ടുള്ളതാണ്.
• Maximum weight capacity for the upper bed is 250 lbs. Maximum weight capacity for the bottom bed is 350 lbs.

ഉൽപ്പന്ന ഘടകങ്ങൾ

Before assembly, verify that all parts are present and undamaged. Refer to the included hardware list for specific component identification.

Figure 1: Overall Dimensions and Key Measurements. This diagram illustrates the length, width, and height of the bunk bed, including the slide, providing a comprehensive overview of its size.

സജ്ജീകരണവും അസംബ്ലിയും

Assembly requires at least two adults. Clear a spacious area for assembly. Do not fully tighten screws until all components are loosely assembled.

1. പോറലുകൾ ഉണ്ടാകാതിരിക്കാൻ എല്ലാ ഘടകങ്ങളും അൺപാക്ക് ചെയ്ത് മൃദുവായതും വൃത്തിയുള്ളതുമായ ഒരു പ്രതലത്തിൽ വയ്ക്കുക.
2. Identify all frame pieces, guardrails, ladder, and slide.
3. Begin by assembling the main bed frames (upper and lower) according to the detailed diagrams in the separate assembly guide.
4. Attach the mattress support slats to both upper and lower frames. Ensure they are evenly spaced and securely fastened.
5. Install the guardrails on the upper bunk. Verify they are firmly attached to prevent falls.
6. Attach the ladder to the designated side of the bunk bed. Ensure it is stable and provides safe access to the upper bunk.
7. Attach the slide to the designated opening. The slide and ladder are convertible and can be swapped or the slide can be omitted. Ensure the slide is securely fastened and rests on a stable surface.
8. Once all components are in place, gradually tighten all screws and bolts. Do not overtighten.
9. Perform a final check to ensure all connections are secure and the bed is stable before use.

Figure 2: Convertible Bunk Bed to Loft Bed Configuration. This image demonstrates how the bunk bed can be reconfigured into a loft bed, offering versatility in room design.

Figure 3: Convertible Slide and Ladder Options. This image illustrates the flexibility of swapping the slide and ladder positions to best suit your space and preferences.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

This bunk bed is designed for sleeping and light recreational use of the slide. Adhere to the following:

• Ensure mattresses are properly placed and do not exceed the recommended thickness.
• Only one person should use the slide at a time.
• കിടക്കയിൽ ചാടിക്കയറരുത്.
• When converting the bed to a loft configuration, ensure all components are securely reassembled and stable.

മെയിൻ്റനൻസ്

Regular maintenance will prolong the life of your bunk bed:

• Periodically check all bolts and screws to ensure they are tight. Re-tighten as necessary, but do not overtighten.
• മെറ്റൽ ഫ്രെയിം ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp തുണി. ഉരച്ചിലുകൾ ഉണ്ടാക്കുന്ന ക്ലീനറുകളോ കഠിനമായ രാസവസ്തുക്കളോ ഒഴിവാക്കുക.
• Inspect the slide and ladder for any signs of wear or damage. Replace damaged parts immediately.
• Keep the bed dry and away from excessive moisture.

Figure 4: Mattress Slats Detail. This image shows the sturdy metal slats that provide support for the mattress, eliminating the need for a box spring.

Figure 5: Guardrail Gate Detail. This image highlights the design of the full-length guardrail with a handy gate, enhancing safety and access.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact Polibi customer service. Details are typically provided with your purchase documentation or can be found on the manufacturer's official webസൈറ്റ്.

Manufacturer: Polibi

ആദ്യം ലഭ്യമാകുന്ന തീയതി: ഓഗസ്റ്റ് 22, 2024

കൂടുതൽ സഹായത്തിന്, ദയവായി സന്ദർശിക്കുക ആമസോണിലെ പോളിബി സ്റ്റോർ.