KATOOL AM120SD 12000lbs Two-Post Car Lift Instruction Manual

1. ആമുഖവും അവസാനവുംview

This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your KATOOL AM120SD 12000lbs Two-Post Car Lift. Designed for professional automotive environments, this heavy-duty lift features a 4.0HP motor and a single-point locking system for enhanced safety and productivity. Please read this manual thoroughly before installation or operation to ensure proper usage and to prevent injury or damage.

2 സുരക്ഷാ വിവരങ്ങൾ

Always prioritize safety when operating heavy machinery. Failure to follow safety instructions can result in serious injury or death. Ensure all personnel are trained and aware of potential hazards.

• മാനുവൽ വായിക്കുക: ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ പ്രവർത്തന നടപടിക്രമങ്ങളും സുരക്ഷാ മുന്നറിയിപ്പുകളും മനസ്സിലാക്കുക.
• യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ: Only trained and authorized individuals should operate this equipment.
• ശരിയായ ഇൻസ്റ്റാളേഷൻ: Ensure the lift is installed on a level, solid concrete foundation capable of supporting the lift's weight and maximum load.
• ലോഡ് കപ്പാസിറ്റി: Never exceed the maximum rated lifting capacity of 12,000 lbs.
• വാഹന സ്ഥാനം: Center the vehicle properly on the lift arms and ensure all four lift pads are securely positioned under the vehicle's designated lifting points.
• ലോക്കിംഗ് മെക്കാനിസങ്ങൾ: Always engage the safety locking mechanisms before working under the vehicle.
• വിസ്തൃതമായ പ്രദേശം: Keep the area around the lift clear of obstructions and unauthorized personnel during operation.
• പതിവ് പരിശോധന: Perform daily and weekly checks as outlined in the Maintenance section.

3. ഉൽപ്പന്ന സവിശേഷതകൾ

• Superior 12,000-lb Heavy-Duty Lifting Capacity: Built for demanding professional environments, this 2-post lift offers an exceptional 12,000-lb lifting capacity, making it a robust solution for auto repair shops, fleet maintenance centers, and dealerships.
• High-Efficiency 4.0HP Electric Motor System: Equipped with a powerful 4.0HP motor, this lift provides faster rise times, smoother operation, and consistent performance under heavy loads, ensuring quick and efficient lifting.
• Advanced Single-Point Locking System: The innovative Single Point Lock mechanism enhances safety by securely locking the lift at various height positions, providing peace of mind during extended operations.
• Maximum Working Height of 70.87 Inches: With an industry-leading maximum lifting height of 70.87 inches, this model offers outstanding overhead clearance for technicians to perform repairs, maintenance, and inspections with ease.
• Ultra-Low 4.25-Inch Minimum Height: Featuring an ultra-low minimum lifting height of just 4.25 inches, this lift easily accommodates vehicles with extremely low ground clearance, including sports cars and lowered sedans, without requiring additional adapters or ramps.

4 സ്പെസിഫിക്കേഷനുകൾ

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the safety and functionality of your KATOOL AM120SD lift. It is highly recommended that installation be performed by qualified professionals. Refer to the detailed installation video below for visual guidance.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ കഴിഞ്ഞുview:

1. അൺപാക്കിംഗും പരിശോധനയും: Carefully unbox all components. Check for any damage or missing parts.
2. സൈറ്റ് തയ്യാറാക്കൽ: Ensure the installation site has a level concrete floor of sufficient thickness and strength to support the lift and its maximum load.
3. Column Placement: Position the two main columns according to the provided dimensions, ensuring proper spacing and alignment.
4. ആങ്കറിംഗ്: Securely anchor the columns to the concrete floor using the provided expansion bolts.
5. Hydraulic System Setup: Connect the hydraulic hoses and power unit. Fill the reservoir with the recommended hydraulic oil.
6. കേബിൾ റൂട്ടിംഗ്: Route the equalization cables and safety tripwires through the columns and pulleys as instructed.
7. ആയുധ ഇൻസ്റ്റാളേഷൻ: Install the lifting arms, ensuring the correct two-stage and three-stage arms are placed at the front and rear respectively.
8. ഇലക്ട്രിക്കൽ കണക്ഷൻ: Connect the 220V power supply to the motor, ensuring proper grounding.
9. പ്രാരംഭ പരീക്ഷണ ഓട്ടം: Perform a test run without a vehicle to check for smooth operation, proper synchronization, and engagement of safety locks.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps for safe and effective operation of your KATOOL AM120SD Two-Post Car Lift.

വാഹനം ഉയർത്തൽ:

1. സ്ഥാനം വാഹനം: Drive the vehicle onto the lift, ensuring it is centered between the columns.
2. ആയുധങ്ങൾ ക്രമീകരിക്കുക: Swing the lift arms into position under the vehicle's designated lifting points. Ensure the two-stage arms are at the rear and three-stage arms are at the front.
3. Adjust Lift Pads: Adjust the height of the lift pads to make firm contact with the vehicle's frame. Use height adjustment pads as needed for vehicles with varying chassis heights.
4. പ്രാരംഭ ലിഫ്റ്റ്: Press the 'UP' button on the power unit to slowly raise the vehicle a few inches off the ground.
5. സ്ഥിരത പരിശോധിക്കുക: വാഹനം സ്ഥിരതയുള്ളതാണെന്നും നാല് പാഡുകളിലും സുരക്ഷിതമായി പിന്തുണയ്ക്കുന്നുണ്ടെന്നും ശ്രദ്ധാപൂർവ്വം പരിശോധിക്കുക.
6. Full Lift: Continue pressing the 'UP' button to raise the vehicle to the desired working height.
7. എൻഗേജ് സേഫ്റ്റി ലോക്കുകൾ: Once at the desired height, lower the lift slightly until the safety locks engage with an audible 'click'. This transfers the load from the hydraulic system to the mechanical locks.

വാഹനം താഴ്ത്തൽ:

1. ചെറുതായി ഉയർത്തുക: Press the 'UP' button briefly to lift the vehicle off the safety locks.
2. ലോക്കുകൾ വേർപെടുത്തുക: Pull the single-point lock release handle to disengage the safety locks.
3. താഴ്ന്ന വാഹനം: Press the 'DOWN' lever on the power unit to slowly lower the vehicle. Ensure the area below is clear.
4. Retract Arms: Once the vehicle is fully on the ground, swing the lift arms clear before driving the vehicle off the lift.

7. പരിപാലന, പരിചരണ നിർദ്ദേശങ്ങൾ

Regular maintenance is essential to ensure the longevity and safe operation of your KATOOL AM120SD lift.

പ്രതിദിന ഉപയോഗം:

• Safety Device Check: Check if the safety device can lock into place and if the linkage is functioning properly. Repair or replace any potential hazards promptly.

ആഴ്ചതോറുമുള്ള പരിശോധന:

• Steel Wire Inspection: Inspect the steel wire for looseness or broken strands.
• Sliding Blocks: Observe the sliding blocks on the internal platform of the columns and apply grease as needed. If wear on one side exceeds 20%, it will no longer be securely gripped by the columns and should be replaced in a timely manner.

Bi-Weekly Check:

• Hydraulic Hose Connections: Inspect all hydraulic hose connections for leaks or ruptures, and repair or replace them as necessary.

പ്രതിമാസ പരിപാലനം:

• ഫാസ്റ്റനർ പരിശോധന: Check if all screws and nuts are tightened properly. After a test run, retighten all screws and nuts.

8. പ്രശ്‌നപരിഹാരം

This section provides solutions to common issues you might encounter with your KATOOL AM120SD lift.

9. ബോക്സിൽ എന്താണുള്ളത്?

The KATOOL AM120SD 12000lbs Two-Post Car Lift package includes the following components:

• Two-Post Car Lift (Main Assembly)
• Power Unit (4.0HP, 220V)
• ഹൈഡ്രോളിക് ഹോസുകൾ
• Lifting Arms (Two-stage and Three-stage)
• Lift Pads and Height Adapters
• Equalization Cables and Pulleys
• Safety Locking Mechanisms and Release Handle
• Mounting Hardware (Expansion Bolts, Nuts, Washers)
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

10. വാറൻ്റിയും പിന്തുണയും

KATOOL is committed to providing high-quality products and customer satisfaction. For any questions, technical assistance, or warranty claims, please contact KATOOL Customer Support.

• ഉപഭോക്തൃ പിന്തുണ: For assistance, please refer to the contact information provided with your purchase or visit the official KATOOL webസൈറ്റ്.
• സംരക്ഷണ പദ്ധതികൾ: Extended protection plans may be available for purchase to cover your investment beyond the standard warranty.
• റിട്ടേണുകൾ: This product is eligible for 30-day easy returns. Please refer to the seller's return policy for details.