1. ആമുഖം
The Creality Rotary Roller Pro is a versatile 3-in-1 accessory designed to expand the capabilities of your laser engraver. It enables precise engraving on various curved and spherical objects, including cylinders, cups, rings, and balls. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and safety.
Image 1: The Creality Rotary Roller Pro with a wine glass in position for engraving.
ചിത്രം 2: ഒരു ഓവർview of the Creality Rotary Kit Pro, showcasing its features for curved surface engraving, including no assembly required, multifunctional adjustable jaws, one-handed clamping, and an adjustable rotary chuck.
2 സുരക്ഷാ വിവരങ്ങൾ
- Always wear appropriate laser safety glasses when operating a laser engraver with this accessory.
- Ensure the work area is well-ventilated to dissipate fumes generated during engraving.
- പ്രവർത്തന സമയത്ത് കൈകളും അയഞ്ഞ വസ്ത്രങ്ങളും ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്ന് അകറ്റി നിർത്തുക.
- Do not leave the laser engraver unattended while in operation.
- Ensure the Rotary Roller Pro is securely placed and the object is firmly clamped before starting any engraving task.
3. പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- Rotary Kit Pro unit
- ദ്രുത ഗൈഡ്
- M4 അലൻ റെഞ്ച്
- M4*8 Screws (quantity: 4)
- Hex Studs (quantity: 3)
- ഭരണാധികാരി
Unboxing and Overview വീഡിയോ
Video 1: This official Creality video provides a quick guide on how to set up the Rotary Kit Pro, including unboxing the components and initial installation steps.
4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
4.1 Installing the Rotary Roller Pro
- Prepare your Laser Engraver: If your laser engraver requires additional height for the rotary module, install the raiser stands (if provided with your engraver model) to elevate the machine.
- Place the Rotary Kit: Position the Rotary Roller Pro unit securely on your engraving platform.
- Connect to Laser Engraver: Locate the Y-axis motor cable on your laser engraver. Disconnect the existing Y-axis cable and connect the Rotary Roller Pro's cable to the Y-axis port of your laser engraver.
Image 3: The Creality Rotary Roller Pro installed and connected to a laser engraver, demonstrating its ready-to-use design.
4.2 Software Configuration (LightBurn Exampലെ)
To enable rotary engraving, configure your engraving software (e.g., LightBurn) as follows:
- Open LightBurn and navigate to the ക്രമീകരണങ്ങൾ മെനു.
- ഓപ്ഷൻ പ്രവർത്തനക്ഷമമാക്കുക "Show rotary enable on main window" ക്ലിക്ക് ചെയ്യുക OK.
- പോകുക ലേസർ ഉപകരണങ്ങൾ തുറക്കുക "Rotary Setup" ജാലകം.
- സജ്ജമാക്കുക റോട്ടറി തരം വരെ "Chuck".
- പരിശോധിക്കുക "Enable Rotary" പെട്ടി.
- സജ്ജമാക്കുക റോട്ടറി ആക്സിസ് വരെ "Y Axis".
- ഇൻപുട്ട് "40 mm per rotation".
- Measure the diameter or circumference of your engraving object using the included ruler and input the value into the corresponding field.
- ക്ലിക്ക് ചെയ്യുക OK ക്രമീകരണങ്ങൾ സംരക്ഷിക്കാൻ.
5. Operating the Rotary Roller Pro
5.1 Clampരീതികൾ
The Rotary Roller Pro offers three clamping methods for various object shapes:
രീതി 1: Clamp from the Outside (Cylindrical Objects with Diameter of 1-110mm)
- Align the triangle marker on the chuck with the hand-twisted screw.
- Tighten the hand-twisted screw clockwise to fix the chuck. This prevents the chuck from rotating when adjusting the tensioner.
- Measure the circumference of the object to be engraved using the provided ruler.
- Rotate the tensioner to open the chuck jaws.
- Place the cylindrical object between the jaws and rotate the tensioner to fix the object securely.
- Install the support module as needed for longer objects.
- Loosen the hand-twisted screw counter-clockwise.
- Rotate the chuck to check if the object can rotate smoothly.
Image 4: A cylindrical cup clamped from the outside using the Rotary Roller Pro's jaws.
Method 2: Prop Up from the Inner Side (Cylindrical Objects with Diameter of 25-75mm)
- Change the chuck configuration to prop up from the inner side. This involves adjusting the jaws to extend inwards.
- Install the engraved object by fitting it onto the inner jaws.
- For tapered objects, raise one side of the rotary unit using a shim or support to ensure the engraving surface is level with the laser.
Image 5: A cylindrical object propped up from the inner side for engraving.
Method 3: Using Hex Stud (Spheres with Diameter of 10-130mm, Rings/Bracelets with Diameter of 15-100mm)
- Change the chuck configuration to install the hex studs. Insert the three hex studs into the chuck.
- Fix the ring or sphere onto the hex studs.
- For clear glass surfaces, an additional dark coating (e.g., black spray paint or tape) is required to absorb the laser energy for effective engraving.
Image 6: A spherical object held by hex studs for precise engraving.
Image 7: A ring securely held by hex studs for detailed engraving.
5.2 ഫോക്കൽ ലെങ്ത് ക്രമീകരിക്കുന്നു
cl ശേഷംamping the object, adjust the focal length of your laser module to ensure optimal engraving quality:
- Place the focal length gauge (if provided with your laser engraver) on the surface of the object.
- Adjust the height of the laser module until the bottom of the module touches the gauge.
- Remove the gauge. The laser is now at the correct focal distance.
5.3 Starting Engraving
Once the object is clamped and the focal length is set, you can proceed with your engraving project using your laser engraver's software.
Image 8: The anti-slip soft pads on the Rotary Roller Pro, designed to enhance friction and protect fragile items during engraving.
Image 9: A visual representation of the high precision (0.225 degrees) offered by the Rotary Roller Pro for accurate engraving.
6 അനുയോജ്യത
The Creality Rotary Roller Pro is designed for broad compatibility:
- Laser Engravers: Compatible with Creality Falcon series and approximately 95% of other laser engraver machines on the market that utilize a PH2.0-6P (6 PIN) interface. Users of other brands should verify port compatibility.
- സോഫ്റ്റ്വെയർ: Supports popular engraving software such as LaserGRBL and LightBurn.
Image 10: The Rotary Roller Pro is compatible with popular engraving software like LightBurn and LaserGRBL.
Image 11: The Creality Rotary Roller Pro is compatible with various laser engraver brands, including Creality, XTOOL, ORTUR, Sculpfun, Genmitsu, LONGER, ATOMSTACK, Twotrees, and ATEZR.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്ന അളവുകൾ | 14 x 4.8 x 3.9 ഇഞ്ച് |
| ഇനം മോഡൽ നമ്പർ | Rotary Roller Pro |
| ഇനത്തിൻ്റെ ഭാരം | 5.04 പൗണ്ട് |
| നിർമ്മാതാവ് | ക്രിയാത്മകത |
| Max. Support Length | 230mm (for longer objects) |
| Cylindrical Object Diameter (Clamp from outside) | 1-110 മി.മീ |
| Cylindrical Object Diameter (Prop up from inner side) | 25-75 മി.മീ |
| Sphere Diameter (Hex Stud) | 10-130 മി.മീ |
| Ring/Bracelet Diameter (Hex Stud) | 15-100 മി.മീ |
Image 12: Detailed product parameters, including diameter ranges for different object types.
8. പരിപാലനം
- Regularly clean the rollers and chuck jaws to prevent debris buildup, which can affect rotation and clamping.
- Inspect cables for any signs of wear or damage. Replace if necessary.
- Store the Rotary Roller Pro in a clean, dry environment when not in use.
9. പ്രശ്നപരിഹാരം
- Object Slipping: വസ്തു സുരക്ഷിതമായി cl ആണെന്ന് ഉറപ്പാക്കുക.amped using the appropriate method. Check if the anti-slip pads are clean and intact.
- Uneven Engraving: Verify that the object is level and the focal length is correctly set across the entire engraving surface. For tapered objects, use shims to level the surface.
- കണക്ഷൻ പ്രശ്നങ്ങൾ: Confirm that the Rotary Roller Pro cable is firmly connected to the Y-axis port of your laser engraver and that software settings are correctly configured for rotary engraving.
10. വാറൻ്റിയും പിന്തുണയും
For warranty information, technical support, or further assistance, please refer to the official Creality website or contact Creality customer service directly.
നിങ്ങൾക്ക് സന്ദർശിക്കാനും കഴിയും Creality Official Store on Amazon ഉൽപ്പന്ന വിവരങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കും.
