Teslong NTS300 Industrial Endoscope User Manual

ഉൽപ്പന്നം കഴിഞ്ഞുview & സവിശേഷതകൾ

The Teslong NTS300 is a versatile industrial endoscope designed for detailed inspections in various environments. It features a dual-lens system, a high-definition display, and robust construction for reliable performance.

• Dual Lens Inspection Camera: Equipped with a main lens and a side lens, each with adjustable LED lights for comprehensive viewing.
• 5" 720P HD IPS Screen: A large, clear, and durable industrial-grade screen for real-time viewing.
• IP67 വാട്ടർപ്രൂഫ് ഡിസൈൻ: The camera probe is waterproof, allowing for use in wet or submerged conditions.
• ക്രമീകരിക്കാവുന്ന LED ലൈറ്റുകൾ: Multiple high-intensity LEDs ensure clear visibility in dark inspection areas.
• ദീർഘകാല ബാറ്ററി: A built-in 5000mAh rechargeable battery provides approximately 4.5 hours of continuous operation.
• ഉപയോക്തൃ-സൗഹൃദ ഇൻ്റർഫേസ്: Simple controls and easy data transfer via USB Type-C and TF card slot.
• Semi-Rigid Gooseneck Cable: The flexible cable retains its shape for precise positioning during inspections.

Figure 1: Teslong NTS300 Industrial Endoscope with its flexible probe and protective carrying case.

Figure 2: Close-up of the dual-lens endoscope probe, highlighting the front-view and side-view cameras with their respective LED lights.

Figure 3: The 5-inch 720P HD IPS screen, designed for clear and bright image display during inspections.

സജ്ജമാക്കുക

1. ഉള്ളടക്കം അൺപാക്ക് ചെയ്യുക: Carefully remove all components from the carrying case. Verify that the NTS300 Inspection Monitor, Camera Probe, USB-C Charging Cable, User Manual, and accessories (hook, magnet, mirror) are present.
2. ബാറ്ററി ചാർജ് ചെയ്യുക: Connect the USB-C Charging Cable to the monitor's USB Type-C port and a suitable USB power adapter (not included). The battery indicator on the screen will show charging status. A full charge takes approximately 5 hours.
3. Attach Camera Probe: Align the connector of the camera probe with the Cable Interface Port on the top of the monitor. Gently push and twist the locking ring to secure the probe.
4. TF കാർഡ് ചേർക്കുക: Locate the TF card slot on the side of the monitor. Insert the provided 32GB TF card (or your own, Class 10 or higher) until it clicks into place. This card is essential for saving photos and videos.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ/ഓഫ്: Press and hold the power button (marked with a power icon) on the handle to turn the device on or off.
2. Adjust Screen Angle: Use the button on the side of the handle to adjust the screen's tilt for optimal viewing.
3. LED ലൈറ്റുകൾ നിയന്ത്രിക്കുക: Press the light button (marked with a lightbulb icon) on the control panel to cycle through different brightness levels for the camera's LED lights (low, medium, high, off).
4. Switch Between Lenses: The NTS300 features dual lenses. Use the dedicated button on the camera probe cable to switch between the front-view and side-view ക്യാമറകൾ.
5. ഫോട്ടോകൾ എടുക്കുക: ലൈവിൽ view mode, press the camera icon button on the control panel to capture a still image.
6. വീഡിയോകൾ റെക്കോർഡ് ചെയ്യുക: Press the mode button to switch to video recording mode. Then, press the record button (usually the camera icon again, or a dedicated record button) to start/stop recording.
7. Use Built-in Flashlight: The handle features a 1W CREE LED flashlight. Use the flashlight switch on the handle to turn it on/off for additional illumination in dark areas.
8. മെനുകൾ നാവിഗേറ്റ് ചെയ്യുക: Use the directional arrow buttons (Up, Down, Left, Right) and the OK button to navigate through the device's settings and playback options.

മെയിൻ്റനൻസ്

• അന്വേഷണം വൃത്തിയാക്കുന്നു: After use in wet or dirty environments, wipe the IP67 waterproof camera probe with a clean, damp തുണി. സംഭരണത്തിന് മുമ്പ് ഇത് ഉണങ്ങിയതാണെന്ന് ഉറപ്പാക്കുക.
• ബാറ്ററി കെയർ: Recharge the 5000mAh battery regularly to maintain its lifespan. Avoid completely draining the battery frequently. Store the device with a partial charge if not used for extended periods.
• സംഭരണം: Always store the NTS300 Inspection Monitor and Camera Probe in the provided carrying case to protect them from dust, moisture, and physical damage.
• ആക്സസറി കെയർ: Keep the hook, magnet, and mirror accessories clean and stored securely in their designated compartments within the case.

ട്രബിൾഷൂട്ടിംഗ്

• സ്ക്രീനിൽ ചിത്രമില്ല: Ensure the camera probe is securely connected to the monitor. Check if the battery is charged.
• മോശം ചിത്രത്തിന്റെ ഗുണനിലവാരം: Adjust the LED light brightness. Clean the camera lens if it appears dirty. Ensure the focus range (30-100mm for main, 20-60mm for side) is appropriate for your inspection distance.
• ഉപകരണം പ്രതികരിക്കുന്നില്ല: Try resetting the device by locating the small reset button (often recessed) and pressing it with a thin object like a paperclip.
• ഫോട്ടോകൾ/വീഡിയോകൾ സംരക്ഷിക്കാൻ കഴിയില്ല: Verify that a TF card is inserted correctly and has sufficient free space. Ensure the card is Class 10 or higher.

സ്പെസിഫിക്കേഷനുകൾ

ഔദ്യോഗിക ഉൽപ്പന്ന വീഡിയോകൾ

വാറൻ്റി & പിന്തുണ

For detailed warranty information and further support, please refer to the official documentation provided with your product or visit the Teslong brand store.

• ഉപയോക്തൃ ഗൈഡ് (PDF): ഉപയോക്തൃ ഗൈഡ് ഡൗൺലോഡ് ചെയ്യുക
• സുരക്ഷാ വിവരങ്ങൾ (PDF): സുരക്ഷാ വിവരങ്ങൾ ഡൗൺലോഡ് ചെയ്യുക
• Teslong Brand Store: സ്റ്റോർ സന്ദർശിക്കുക