ആമുഖം
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your MSpa Round Inflatable Bubble Massage Spa, Model F-DU063W. Please read this manual thoroughly before setting up and using your spa to ensure proper function and longevity of the product. Keep this manual for future reference.
പ്രധാനപ്പെട്ട സുരക്ഷാ നിർദ്ദേശങ്ങൾ
മുന്നറിയിപ്പ്: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. Always supervise children. This spa is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Always connect the spa to a grounded outlet.
- Do not operate the spa if the water temperature is above 104°F (40°C).
- Consult a doctor before use if you are pregnant, have health conditions, or are on medication.
- സ്പായ്ക്ക് സമീപം വൈദ്യുത ഉപകരണങ്ങൾ ഉപയോഗിക്കരുത്.
- Ensure the spa is placed on a flat, stable surface capable of supporting its weight when filled.
- Regularly check the water quality and maintain proper chemical balance.
- Always use the spa cover when not in use to prevent unsupervised access and heat loss.
പാക്കേജ് ഉള്ളടക്കം
അസംബ്ലി ആരംഭിക്കുന്നതിന് മുമ്പ്, താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക. ഏതെങ്കിലും ഭാഗങ്ങൾ നഷ്ടപ്പെട്ടിട്ടുണ്ടെങ്കിലോ കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ടെങ്കിലോ, അസംബ്ലിയുമായി മുന്നോട്ട് പോകരുത്, ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
- Inflatable Spa Body (Woodgrain finish)
- External Control Box with Pump and Heater
- Standard Spa Cover (Black)
- Energy-Efficient Spa Cover (Black)
- ഫിൽട്ടർ കാട്രിഡ്ജ്(കൾ)
- പണപ്പെരുപ്പ ഹോസ്
- Drainage Hose Adapter
- റിപ്പയർ കിറ്റ്
- ഇൻസ്ട്രക്ഷൻ മാനുവൽ (ഈ പ്രമാണം)
സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
1. Site Selection and Preparation
Choose a flat, level surface free of sharp objects. The area must be able to support the weight of the filled spa (approximately 245 gallons of water plus occupants). Ensure there is adequate drainage and access to a grounded electrical outlet.
2. പണപ്പെരുപ്പം
- Unfold the spa body and lay it flat on the prepared surface.
- Connect the inflation hose to the air valve on the spa body and to the inflation port on the control box.
- Plug in the control box and press the "Bubble" button to begin inflation.
- Inflate until the spa walls are firm to the touch, but not over-inflated. Do not use an air compressor.
- Disconnect the inflation hose and securely close the air valve.
3. Control Box Connection
Connect the control box to the spa body's water inlet and outlet ports. Ensure all connections are tight to prevent leaks.
4. വെള്ളം നിറയ്ക്കൽ
Fill the spa with fresh water using a garden hose. Fill to the recommended water level indicated on the spa's interior wall. Do not overfill.
5. ഫിൽറ്റർ ഇൻസ്റ്റാളേഷൻ
Install the filter cartridge(s) into the filter housing(s) inside the spa. Ensure they are securely twisted into place.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
1. Control Panel and MSpa Mobile App
The spa can be controlled via the integrated control panel on the external unit or through the MSpa mobile application. The app provides full control over spa functions from your smartphone.
2. ചൂടാക്കൽ പ്രവർത്തനം
Press the "Heater" button on the control panel or app to activate the heating system. The water temperature will increase at a rate of approximately 1.8-2°F per hour, up to a maximum of 104°F (40°C). The display will show the current water temperature.
3. Bubble Massage System
Activate the 138 Air Jets Massage System by pressing the "Bubble" button. The system offers 3 variable bubble speeds for a customized experience. Press the button repeatedly to cycle through speeds or turn off.
4. Smart Filtration
The smart filtration system automatically runs to keep your water clean. Ensure filter cartridges are regularly cleaned or replaced for optimal performance.
5. Anti-Icing System
The anti-icing system automatically activates when the water temperature drops below a certain threshold, preventing freezing and protecting internal components. This feature is designed for use in cold weather conditions.
6. Heating Timer
Utilize the heating timer function to schedule when the spa heater turns on. This allows you to pre-heat the spa to your desired temperature before use, saving energy and ensuring it's ready when you are.
മെയിൻ്റനൻസ്
1. ജല രസതന്ത്രം
Regularly test and adjust the spa water chemistry (pH, alkalinity, sanitizer levels) according to recommended guidelines. Improper water balance can damage the spa and cause skin irritation.
2. ഫിൽട്ടർ വൃത്തിയാക്കലും മാറ്റിസ്ഥാപിക്കലും
Clean filter cartridges weekly by rinsing them with a garden hose. Replace cartridges every 1-2 months, or more frequently with heavy use, to maintain efficient filtration.
3. Draining and Cleaning
Drain and refill the spa water at least once every two months. When draining, clean the interior surface of the spa with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly before refilling.
4. Spa Cover Care
Always use the spa cover when the spa is not in use. The included energy-efficient cover significantly improves heat retention, saving up to 50% on energy. Clean covers regularly with a mild soap and water solution. Inspect for damage and repair as needed.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| സ്പാ ചൂടാക്കുന്നില്ല | Heater not activated, low water level, dirty filter, ambient temperature too low. | Ensure heater is on. Check water level and add water if necessary. Clean or replace filter. Use energy-efficient cover. |
| കുമിളകളില്ല | Bubble function not activated, air blower malfunction. | Press the "Bubble" button. If issue persists, contact customer support. |
| വെള്ളം മേഘാവൃതമാണ് | Dirty filter, improper water chemistry, heavy use. | Clean or replace filter. Test and adjust water chemistry. Shock treat the water. |
| ഡിസ്പ്ലേയിൽ പിശക് കോഡ് | Specific system issue (e.g., sensor error, flow error). | Refer to the specific error code section in the full manual (if available) or contact customer support with the code. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | എംഎസ്പിഎ |
| മോഡലിൻ്റെ പേര് | F-DU063W |
| നിറം | Black (Spa body with woodgrain finish) |
| ഉൽപ്പന്ന അളവുകൾ | 68"L x 68"W x 26"H |
| മെറ്റീരിയൽ | വിനൈൽ |
| ശേഷി | 245 ഗാലൻ |
| Number of Air Jets | 138 |
| സീറ്റിംഗ് കപ്പാസിറ്റി | 6 ആളുകൾ വരെ |
| പരമാവധി ജല താപനില | 104°F (40°C) |
| ചൂടാക്കൽ നിരക്ക് | 1.8-2°F per hour |
| അസംബ്ലി ആവശ്യമാണ് | No (referring to complex assembly, inflation is required) |
| യു.പി.സി | 193802381740 |
വാറൻ്റിയും ഉപഭോക്തൃ പിന്തുണയും
MSpa products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official MSpa webസൈറ്റ്.
If you encounter any issues or have questions regarding your MSpa Round Inflatable Bubble Massage Spa, please contact MSpa customer support. Have your model number (F-DU063W) and purchase information ready when contacting support.
MSpa Official Webസൈറ്റ്: www.mspa.com
