Klein Tools BLS18 Hex Key Wrench Set User Manual

1. ആമുഖം

This manual provides instructions for the safe and effective use of the Klein Tools BLS18 Hex Key Wrench Set. This set includes 18 color-coded hex keys in both SAE and Metric sizes, designed for various fastening applications. The L-style, long-arm design with ball ends enhances accessibility and leverage.

2 സുരക്ഷാ വിവരങ്ങൾ

കൈ ഉപകരണങ്ങൾ ഉപയോഗിക്കുമ്പോൾ എല്ലായ്പ്പോഴും ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ പാലിക്കുക:

• കണ്ണിന് പരിക്കേൽക്കുന്നത് തടയാൻ സുരക്ഷാ ഗ്ലാസുകൾ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ധരിക്കുക.
• Ensure the hex key size matches the fastener to prevent stripping the fastener head or damaging the tool.
• Do not use hex keys with power tools unless specifically designed for such use.
• Avoid applying excessive force that could bend or break the hex key.
• Keep tools clean and free of grease or oil to maintain a secure grip.
• Store hex keys in their caddy when not in use to prevent loss and maintain organization.

3. പാക്കേജ് ഉള്ളടക്കം

The Klein Tools BLS18 Hex Key Wrench Set includes the following 18 pieces, organized in a compact caddy:

• SAE Sizes: 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch
• Metric Sizes: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm

4. ഉൽപ്പന്ന സവിശേഷതകൾ

Key features of the BLS18 Hex Key Wrench Set include:

• Color-Coded Sleeves: Each hex key features a distinct color sleeve for quick and easy identification of SAE and Metric sizes.
• Extra-Long Arms: The extended length provides increased reach and leverage for fasteners in confined spaces.
• മെച്ചപ്പെടുത്തിയ സുഖം: Plastic sleeves on the round shanks offer improved grip and comfort during prolonged use.
• Ball-End Design: Allows for optimal performance and fastening at angles up to 25 degrees, improving access to difficult-to-reach fasteners.

5. സജ്ജീകരണം

The hex keys are pre-assembled in their respective caddies. No additional setup is required before use.

1. Identify Size: Locate the desired hex key by its color-coded sleeve and printed size marking.
2. Remove from Caddy: Gently pull the selected hex key from its slot in the caddy. The caddy is designed to hold the keys securely, so a firm pull may be necessary.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ശരിയായ പ്രവർത്തനത്തിനായി ഈ ഘട്ടങ്ങൾ പാലിക്കുക:

1. ശരിയായ വലുപ്പം തിരഞ്ഞെടുക്കുക: Match the hex key to the fastener head. A snug fit is crucial to prevent damage.
2. കീ ചേർക്കുക: Insert the hex key fully into the fastener head. For angled access, use the ball end. For maximum torque and to prevent stripping, use the straight end when possible.
3. ടോർക്ക് പ്രയോഗിക്കുക: Turn the hex key clockwise to tighten or counter-clockwise to loosen the fastener. Apply steady, even pressure.
4. കീ നീക്കം ചെയ്യുക: Once the task is complete, remove the hex key from the fastener.
5. Return to Caddy: Place the hex key back into its designated slot in the caddy for organized storage.

7. പരിപാലനം

Proper maintenance ensures the longevity and performance of your hex key set:

• വൃത്തിയാക്കൽ: Wipe hex keys clean after each use to remove dirt, grease, or debris. A dry cloth is usually sufficient. For stubborn grime, a mild solvent can be used, followed by thorough drying.
• സംഭരണം: Always store the hex keys in their provided caddy in a dry environment to prevent rust and corrosion. Avoid storing in areas with high humidity or extreme temperatures.
• പരിശോധന: Periodically inspect hex keys for signs of wear, bending, or damage. Replace any damaged keys to ensure safe and effective operation.

8. പ്രശ്‌നപരിഹാരം

സാധാരണ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും:

• Difficulty Removing Keys from Caddy: The caddy is designed for a secure fit. Apply firm, steady pressure when pulling a key out. If a key is excessively tight, ensure it is aligned correctly.
• Stripping Fastener Head: This usually occurs if the hex key size does not perfectly match the fastener, or if excessive rotational force is applied without proper engagement. Ensure the correct size is used and the key is fully seated.
• Hex Key Bending/Breaking: This indicates excessive force or using the tool beyond its intended capacity. Always use the correct tool for the job and avoid using hex keys as pry bars.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

For information regarding product warranty, returns, or technical support, please refer to the official Klein Tools webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Visit the Klein Tools official webസൈറ്റ്: ക്ലീൻ ടൂൾസ് സ്റ്റോർ