KAIWEETS ഡിജിറ്റൽ മൾട്ടിമീറ്റർ HT118A, പെയിന്റ് തിക്ക്നസ് ഗേജ് KOTCO2 യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides comprehensive instructions for the safe and effective operation, setup, and maintenance of your KAIWEETS Digital Multimeter HT118A and KAIWEETS Paint Thickness Gauge KOTCO2. Please read this manual thoroughly before using the devices to ensure proper functionality and to prevent damage or injury.

Figure 1: KAIWEETS Digital Multimeter HT118A (right) and Paint Thickness Gauge KOTCO2 (left).

2 സുരക്ഷാ വിവരങ്ങൾ

Always observe the following safety precautions when using the KAIWEETS Multimeter and Paint Thickness Gauge:

• ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും ശ്രദ്ധാപൂർവ്വം വായിക്കുക.
• Do not operate the devices if they appear damaged or are not functioning correctly.
• ഉപകരണങ്ങൾ വെള്ളം, ഈർപ്പം, കടുത്ത താപനില എന്നിവയിൽ നിന്ന് അകറ്റി നിർത്തുക.
• Use only the specified battery types and ensure correct polarity.
• For the Multimeter:
  • Do not exceed the maximum input values for any measurement range.
  • Ensure test leads are properly connected before making measurements.
  • Exercise caution when working with live circuits.
• For the Paint Thickness Gauge:
  • ശക്തമായ ആഘാതങ്ങൾക്ക് ഉപകരണം ഇടുകയോ ഇടുകയോ ചെയ്യുന്നത് ഒഴിവാക്കുക.
  • Do not attempt to measure on hot surfaces or surfaces with uncured coatings.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• KAIWEETS Digital Multimeter HT118A
• KAIWEETS Paint Thickness Gauge KOTCO2
• Test Leads for Multimeter
• Calibration Plates (Ferrous and Non-Ferrous) for Paint Thickness Gauge
• Calibration Films (e.g., 50µm, 100µm, 250µm, 500µm, 1000µm) for Paint Thickness Gauge
• Storage Bag for Paint Thickness Gauge
• Batteries (AAA, quantity as required for each device)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Figure 2: KAIWEETS Paint Thickness Gauge KOTCO2 and its included accessories, including calibration plates and films, batteries, and a storage bag.

Figure 3: KAIWEETS Digital Multimeter HT118A with its included test leads.

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

4.1 KAIWEETS Digital Multimeter HT118A

The KAIWEETS HT118A is a TRMS 6000 counts digital multimeter designed for accurate measurement of various electrical parameters. It features auto-ranging capabilities for ease of use.

• അളക്കൽ പ്രവർത്തനങ്ങൾ: വാല്യംtage (AC/DC), Current (AC/DC), Resistance, Diodes, Continuity, Duty-Cycle, Capacitance, Temperature.
• ഡിസ്പ്ലേ: Large 2.9-inch HTN backlit screen with dual readings and bargraph.
• സുരക്ഷാ സവിശേഷതകൾ: LED Lightning Jacks to guide correct probe placement.

Figure 4: Close-up of the KAIWEETS HT118A Multimeter's 2.9-inch HTN backlit screen, showing dual readings and a bargraph.

Figure 5: The KAIWEETS HT118A Multimeter featuring LED Lightning Jacks, which illuminate to indicate the correct input terminals for different measurements.

4.2 KAIWEETS Paint Thickness Gauge KOTCO2

The KAIWEETS KOTCO2 is a digital paint thickness gauge designed for measuring coating depth on both ferrous and non-ferrous metals. It offers quick and precise measurements with advanced features for user convenience.

• അളക്കൽ ശ്രേണി: 0-2999µm (0-118 mils).
• യാന്ത്രിക തിരിച്ചറിയൽ: Automatically detects ferrous (Fe) and non-ferrous (NFe) substrates.
• ഡിസ്പ്ലേ: Large backlit rotatable display for enhanced readability, showing metal type, operating mode, battery status, storage records, and measurements.
• ഡാറ്റ സംഭരണം: Capacity to store 30 sets of data.
• അലാറം പ്രവർത്തനം: Upper and lower alarm limit settings.
• അളക്കൽ മോഡുകൾ: Supports both single and continuous measurement modes.
• വൈദ്യുതി ലാഭിക്കൽ: Auto power-off function after 60 seconds of inactivity.

Figure 6: Key features of the KAIWEETS KOTCO2 Paint Thickness Gauge, including its 0-2999µm measuring range, 30 data sets storage, limit alarm, and auto-off function.

Figure 7: The KAIWEETS KOTCO2 Paint Thickness Gauge demonstrating its 2-way rotating backlit screen for improved viewകോണുകൾ.

5. സജ്ജീകരണം

5.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

Both devices require batteries for operation. Locate the battery compartment on the back of each device. Insert the specified AAA batteries, ensuring correct polarity as indicated inside the compartment. Securely close the battery cover.

5.2 Multimeter HT118A Initial Setup

After battery installation, the HT118A is generally ready for use. Connect the test leads to the appropriate input jacks based on the measurement type. The LED Lightning Jacks will assist in correct placement.

5.3 Paint Thickness Gauge KOTCO2 Calibration

For accurate measurements, it is recommended to calibrate the KOTCO2 gauge before first use and periodically thereafter. The device is factory-calibrated, but user calibration modes are available:

1. സീറോ പോയിന്റ് കാലിബ്രേഷൻ: Place the probe firmly and perpendicularly on the bare ferrous or non-ferrous calibration plate. Press the "ZERO" button to set the zero point.
2. Multi-Points Calibration: Use the provided calibration films of known thickness (e.g., 50µm, 100µm) on the calibration plates. Follow the on-screen instructions or refer to the detailed calibration section in the full manual for precise steps to adjust the gauge for optimal accuracy across the measurement range.

Ensure the calibration plates and films are clean and free from dust or debris during calibration.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1 KAIWEETS Digital Multimeter HT118A Operation

1. പവർ ഓൺ/ഓഫ്: Rotate the central dial from "OFF" to the desired measurement function to power on. Rotate back to "OFF" to power off.
2. ഫംഗ്ഷൻ തിരഞ്ഞെടുക്കൽ: Use the central dial to select the primary measurement type (e.g., V for voltage, A for current, Ω for resistance). Press the "FUNC" button to cycle through sub-functions within a category (e.g., AC/DC voltage, ഡയോഡ്/തുടർച്ച).
3. ടെസ്റ്റ് ലീഡുകൾ ബന്ധിപ്പിക്കുന്നു: Insert the black test lead into the "COM" jack. Insert the red test lead into the appropriate jack for your measurement (e.g., VΩmA for voltage/resistance/small current, 10A for large current). The LED Lightning Jacks will illuminate to guide you.
4. Making Measurements:
   • വാല്യംtage: Select V~ (AC) or V- (DC). Connect leads in parallel with the circuit.
   • നിലവിലുള്ളത്: Select A~ (AC) or A- (DC). Connect leads in series with the circuit. Ensure the circuit is de-energized before connecting.
   • പ്രതിരോധം: Select Ω. Connect leads across the component when it is de-energized.
   • തുടർച്ച: Select the continuity function (usually indicated by a speaker icon). A beep indicates continuity.
   • താപനില: Connect the temperature probe (if included) to the appropriate jacks and select the temperature function.
5. ഹോൾഡ് പ്രവർത്തനം: Press the "HOLD" button to freeze the current reading on the display. Press again to release.
6. പരമാവധി/മിനിറ്റ് പ്രവർത്തനം: Press "MAX/MIN" to record the maximum or minimum values during a measurement session.
7. ബാക്ക്ലൈറ്റ്: Press the backlight button (light bulb icon) to turn the display backlight on or off.

Figure 8: The KAIWEETS HT118A Multimeter being used to measure electrical parameters, demonstrating its clear display and ergonomic design.

6.2 KAIWEETS Paint Thickness Gauge KOTCO2 Operation

1. പവർ ഓൺ/ഓഫ്: Press the power button to turn the device on. It will automatically power off after 60 seconds of inactivity.
2. അളക്കൽ യൂണിറ്റ്: Press the "µm/mil" button to switch between micrometers (µm) and mils.
3. Making Measurements:
   • Place the probe firmly and perpendicularly onto the surface to be measured.
   • The device will automatically detect the substrate type (Fe for ferrous, NFe for non-ferrous) and display the coating thickness.
   • For continuous measurement, hold the probe on the surface and move it slowly.
4. ഡാറ്റ സംഭരണം: Press the "REC" button to save the current measurement. The device can store up to 30 sets of data.
5. Setting Alarm Limits: Press the "SET" button to enter the alarm limit setting mode. Use the up/down arrows to adjust the upper and lower limits. An audible alarm will sound if measurements fall outside these limits.
6. സ്‌ക്രീൻ റൊട്ടേഷൻ: The display automatically rotates for optimal viewing ആംഗിൾ.

Figure 9: The KAIWEETS KOTCO2 Paint Thickness Gauge being used in various applications, including automotive paint inspection, industrial workshops, and metal fabrication.

7. പരിപാലനം

• വൃത്തിയാക്കൽ: Wipe the devices with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• സംഭരണം: Store the devices in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: ഡിസ്പ്ലേയിൽ ബാറ്ററി കുറവാണെന്ന് കാണിക്കുമ്പോൾ ബാറ്ററികൾ മാറ്റി സ്ഥാപിക്കുക.
• Calibration (KOTCO2): Periodically re-calibrate the paint thickness gauge using the provided calibration plates and films to ensure continued accuracy.

8. പ്രശ്‌നപരിഹാരം

9 സ്പെസിഫിക്കേഷനുകൾ

9.1 KAIWEETS Digital Multimeter HT118A

• ഡിസ്പ്ലേ: 6000 Counts, TRMS, HTN Backlit
• അളവെടുപ്പ് തരം: വാല്യംtage (AC/DC), Current (AC/DC), Resistance, Capacitance, Frequency, Duty Cycle, Temperature, Diode, Continuity
• സുരക്ഷാ റേറ്റിംഗ്: CAT III 1000V, CAT IV 600V
• ഊർജ്ജ സ്രോതസ്സ്: ബാറ്ററി പവർ
• മോഡൽ നമ്പർ: HT118A (implied from images/context)

9.2 KAIWEETS Paint Thickness Gauge KOTCO2

• അളക്കുന്ന പരിധി: 0-2999µm (0-118 mils)
• Substrate Detection: Automatic (Ferrous/Non-Ferrous)
• ഡാറ്റ സംഭരണം: 30 സെറ്റുകൾ
• ഡിസ്പ്ലേ: Backlit, 2-way Rotatable
• ഊർജ്ജ സ്രോതസ്സ്: ബാറ്ററി പവർ
• ഓട്ടോ പവർ-ഓഫ്: 60 സെക്കൻഡ് നിഷ്‌ക്രിയത്വത്തിന് ശേഷം
• മോഡൽ നമ്പർ: KOTCO2 (implied from images/context)

9.3 General Specifications (Applicable to both devices where relevant)

• ബ്രാൻഡ്: കൈവീറ്റ്സ്
• നിറം: കറുപ്പ്
• സ്പെസിഫിക്കേഷൻ മെറ്റ്: CE, CSA, EN 61010-1, ETL, IEC 61010-1:2000-1, IEC 61326, IP 67, ISO 9001, REACH, RoHS, UL

10. വാറൻ്റിയും പിന്തുണയും

KAIWEETS provides a 3-year maintenance program for this product. Additionally, lifetime technical assistance is available to ensure unparalleled customer support. For technical inquiries or warranty claims, please contact KAIWEETS customer service through their official channels or the retailer where the product was purchased.

For more information, visit the official KAIWEETS Store: KAIWEETS Store