VGR Professional Hair Clipper and Trimmer Set User Manual

ആമുഖം

This manual provides detailed instructions for the safe and effective use of your VGR Professional Hair Clipper (V-003) and T-Blade Trimmer (V-906) set. Please read all instructions carefully before first use and retain this manual for future reference.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

For your safety, always follow these precautions:

• ശിശുക്കളിൽ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
• Keep the trimmer away from water sources. Do not use while bathing or showering.
• Follow recommended cleaning and maintenance procedures as outlined in this manual.
• Use with caution to prevent skin irritation or eye injury from cutting blades.
• ഉപകരണം സ്വയം നന്നാക്കാൻ ശ്രമിക്കരുത്. സഹായത്തിന് ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
• ഒപ്റ്റിമൽ പെർഫോമൻസ് നിലനിർത്താൻ ഉപയോഗിക്കുന്നതിന് മുമ്പ് ഉപകരണം പൂർണ്ണമായി ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.

പാക്കേജ് ഉള്ളടക്കം

Your VGR Professional Hair Clipper and Trimmer Set includes the following items:

• 1 x VGR V-003 Professional Hair Clipper
• 1 x VGR V-906 T-Blade Trimmer
• 6 x Guide Combs for Clipper (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
• 3 x Limiting Combs for Trimmer (1mm, 2mm, 3mm)
• 2 x USB ചാർജിംഗ് കേബിളുകൾ
• 2 x Blade Protective Caps
• 1 x ക്ലീനിംഗ് ബ്രഷ്
• 1 x Lubricant Oil
• 1 x ഉപയോക്തൃ മാനുവൽ

Figure 1: Complete set of VGR Hair Clipper and Trimmer with accessories.

ഉൽപ്പന്നം കഴിഞ്ഞുview

VGR V-003 പ്രൊഫഷണൽ ഹെയർ ക്ലിപ്പർ

Figure 2: VGR V-003 Hair Clipper with key features.

• Ceramic and Powder Metallurgy Blades: Designed for long-lasting sharpness and reduced overheating.
• ക്രമീകരിക്കാവുന്ന ടാപ്പർ ലിവർ: Allows for precise cutting length adjustments from 0.5mm to 2.5mm.
• ശക്തമായ മോട്ടോർ: Operates at up to 9000 RPM with two speed adjustments for various hair textures.
• LED ഡിസ്പ്ലേ: Shows real-time power level.
• നീണ്ട ബാറ്ററി ലൈഫ്: 2500mAh battery provides up to 250 minutes of run time on a 3-hour charge.
• USB ചാർജിംഗ്: Supports both corded and cordless operation.

VGR V-906 T-Blade Trimmer

Figure 3: VGR V-906 T-Blade Trimmer with key features.

• DLC-Coated T-Blades: Zero-gap design for ultra-fine trimming and precise lines.
• ശക്തമായ മോട്ടോർ: Reaches 9000 RPM for smooth and delicate grooming results.
• LED ഡിസ്പ്ലേ: Shows real-time power level.
• നീണ്ട ബാറ്ററി ലൈഫ്: 2000mAh battery provides up to 240 minutes of run time on a 2.5-hour charge.
• USB ചാർജിംഗ്: Supports both corded and cordless operation.

സജ്ജമാക്കുക

1. പ്രാരംഭ ചാർജിംഗ്

Before first use, fully charge both the hair clipper and trimmer. Connect the USB charging cable to the device and a suitable USB power adapter (not included). The LED display will indicate charging status and battery level.

• V-003 Clipper: Approximately 3 hours for a full charge, providing up to 250 minutes of use.
• V-906 Trimmer: Approximately 2.5 hours for a full charge, providing up to 240 minutes of use.

Figure 4: V-003 Clipper charging.

Figure 5: V-906 Trimmer charging.

2. ഗൈഡ് ചീപ്പുകൾ ഘടിപ്പിക്കുന്നു

Select the desired guide comb for your preferred hair length. Align the comb with the blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.

• V-003 Clipper: Use the 6 larger guide combs (1.5mm to 12mm).
• V-906 Trimmer: Use the 3 smaller limiting combs (1mm to 3mm) for detail work.

Figure 6: Attaching guide combs to the clipper and trimmer.

3. Adjusting the Taper Lever (V-003 Clipper Only)

The taper lever on the side of the V-003 clipper allows for fine adjustment of cutting length without changing guide combs. Move the lever up for a shorter cut (0.5mm) and down for a longer cut (2.5mm). This is ideal for blending and fading.

Figure 7: Taper lever adjustment on the V-003 Clipper.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ/ഓഫ്

Press the power button to turn the device on. Press it again to turn off. The LED display will illuminate when the device is on.

2. Speed Adjustment (V-003 Clipper)

The V-003 clipper features two speed settings. Press the power button briefly while the device is on to toggle between the two speeds, up to 9000 RPM. Use a lower speed for finer hair or sensitive areas, and a higher speed for thicker hair.

3. Hair Clipping (V-003 Clipper)

1. മുടി വൃത്തിയുള്ളതും വരണ്ടതുമാണെന്ന് ഉറപ്പാക്കുക.
2. Attach the desired guide comb.
3. Adjust the taper lever if needed for blending.
4. Hold the clipper with the blades pointing upwards and move against the direction of hair growth.
5. Use smooth, overlapping strokes for an even cut.

Figure 8: Using the VGR V-003 Clipper for hair cutting.

4. Detail Trimming (V-906 Trimmer)

1. For precise lines and edges, use the trimmer without a comb or with a limiting comb (1-3mm).
2. Hold the trimmer at a slight angle to the skin.
3. Use light pressure and short, controlled strokes to define hairlines, beard edges, and sideburns.

Figure 9: Using the VGR V-906 Trimmer for detailing.

മെയിൻ്റനൻസ്

1. ബ്ലേഡുകൾ വൃത്തിയാക്കൽ

After each use, turn off the device and remove any attached guide comb. Use the provided cleaning brush to remove loose hairs from the blades. For a more thorough cleaning, the blades can be carefully detached (refer to specific blade removal instructions if provided in a separate diagram, otherwise, clean while attached).

2. ബ്ലേഡുകളിൽ എണ്ണ തേയ്ക്കൽ

Regularly oil the blades to maintain optimal cutting performance and extend their lifespan. Apply 1-2 drops of the provided lubricant oil onto the blades while the device is running for a few seconds. Wipe off any excess oil with a soft cloth.

Figure 10: Cleaning brush and lubricant oil.

3. സംഭരണം

Store the clipper and trimmer in a dry, cool place, away from direct sunlight and moisture. Always attach the blade protective cap when not in use to prevent damage to the blades.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

• ബ്രാൻഡ്: വി.ജി.ആർ.
• മോഡൽ നമ്പറുകൾ: V-003 (Clipper), V-906 (Trimmer)
• ഊർജ്ജ സ്രോതസ്സ്: ബാറ്ററി പവർ (USB റീചാർജ് ചെയ്യാവുന്നത്)
• V-003 Clipper Battery: 2500mAh Li-ion, up to 250 minutes run time, 3 hours charge time
• V-906 Trimmer Battery: 2000mAh Li-ion, up to 240 minutes run time, 2.5 hours charge time
• Blade Material (V-003): Ceramic and Powder Metallurgy
• Blade Material (V-906): DLC-Coated
• മോട്ടോർ സ്പീഡ്: Up to 9000 RPM (2 adjustable speeds for V-003)
• Clipper Guide Combs: 1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm
• Trimmer Limiting Combs: 1 എംഎം, 2 എംഎം, 3 എംഎം
• Clipper Taper Lever Adjustment: 0.5mm - 2.5mm
• ഇനത്തിൻ്റെ ഭാരം: 560 ഗ്രാം
• പാക്കേജ് അളവുകൾ: 11.38 x 9.76 x 3.54 ഇഞ്ച്

വാറൻ്റിയും പിന്തുണയും

VGR products come with a 1-year warranty from the date of purchase. For any product inquiries, technical support, or warranty claims, please contact our customer support team. We offer 24-hour support to assist you.

Figure 11: VGR Customer Support and Warranty Information.

For further assistance, please visit the official VGR webസൈറ്റ് അല്ലെങ്കിൽ വിൽപ്പനക്കാരനെ നേരിട്ട് ബന്ധപ്പെടുക.