Beatbot AquaSense 2 Pro Robotic Pool Cleaner

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Beatbot AquaSense 2 Pro is a cordless robotic pool cleaner designed for comprehensive pool maintenance. It offers unmatched 5-in-1 cleaning power, covering every pool surface: floor, walls, waterline, and water surface, while also clarifying the water. This device is engineered to save time and effort, providing an exceptional pool care experience.

Equipped with advanced CleverNav technology, a 4-core CPU, and 22 sensors, the AquaSense 2 Pro optimizes cleaning paths, navigates obstacles, and ensures thorough cleaning in S/N patterns. Its dual-layer filter captures debris from large leaves to tiny particles (150µm), minimizing maintenance with an anti-blockage design.

Figure 1: 5-in-1 Cleaning Capabilities

എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

അൺബോക്സ് ചെയ്യുമ്പോൾ, എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x AquaSense 2 Pro Robotic Pool Cleaner
• 1 x ചാർജിംഗ് ഡോക്ക്
• 1 x Clarifying Agent Kit
• 1 x Hook (for retrieval)
• 1 x Dual Filter Basket
• 1 x ദ്രുത ആരംഭ ഗൈഡ്
• 1 x ഉപയോക്തൃ മാനുവൽ

Figure 2: AquaSense 2 Pro and Charging Dock

സജ്ജമാക്കുക

1. Setting up the Charging Dock

Assemble the charging dock by attaching the two plastic feet. Place the charging dock on a flat, stable surface, away from direct sunlight and moisture. Ensure the charging cable is securely connected to a power outlet.

Figure 3: Charging Dock Assembly

2. Initial Robot Charge

Place the AquaSense 2 Pro onto the charging dock. A breathing green light indicates that the robot is charging. Allow the robot to fully charge before its first use (approximately 4 hours).

3. Clarifying Agent Kit Installation

The clarifying agent kit is an optional feature. To install, open the designated compartment on the robot's top surface, peel off the aluminum seal from the clarifying agent solution box, and pop it into the compartment. Close the lid securely.

Figure 4: Clarifying Agent Installation

4. നെറ്റ്‌വർക്ക് കണക്ഷൻ

To connect your robot to the network, ensure your robot is powered on. Press and hold the "Power" and "Floor Mode" buttons simultaneously for about 3 seconds until the indicator light flashes blue. Then, use the Beatbot app to complete the connection via Bluetooth, QR code, or manual add. Ensure your phone is within 1 meter of the robot and supports both 2.4GHz and 5GHz WiFi.

Video 1: Before Cleaning How to Set Up-AquaSense 2 Pro. This video demonstrates the initial setup process, including connecting the robot to your network.

ക്ലീനർ പ്രവർത്തിപ്പിക്കുന്നു

The AquaSense 2 Pro offers multiple cleaning modes to suit various pool needs:

• ഫ്ലോർ മോഡ്: പൂളിന്റെ തറ മാത്രം വൃത്തിയാക്കുന്നു.
• സ്റ്റാൻഡേർഡ് മോഡ്: Cleans floor, walls, and waterline.
• പ്രോ മോഡ്: Comprehensive cleaning of floor, walls, waterline, and water surface, with water clarification.
• ഇഷ്‌ടാനുസൃത മോഡ്: Allows you to adjust cleaning areas and duration via the app.
• ഇക്കോ മോഡ്: Cleans the pool floor every 2 days. The robot will park itself at the pool edge when done or low on battery.

App Control and Surface Navigation

Utilize the Beatbot app for precise control. You can select and customize cleaning modes, monitor water and environmental temperatures, view cleaning history, and receive real-time status updates. The app also allows for remote navigation of the cleaner across the pool's surface, enabling you to target stubborn floating debris and direct the robot to the edge for easy pickup.

ചിത്രം 5: ആപ്പ് കൺട്രോൾ ഇന്റർഫേസ്

Smart Parking & Drainage

The robot automatically returns to the pool edge and parks above water when its cleaning cycle is complete or when the battery is low. The SmartDrain feature releases water from the unit, making retrieval lighter and easier, eliminating the need for heavy lifting.

Figure 6: Smart Parking and Drainage

Video 2: Clean smarter, relax deeper-fans = AquaSense 2 Pro. This video highlights the efficiency and ease of use of the cleaner.

മെയിൻ്റനൻസ്

ഫിൽട്ടർ ബാസ്കറ്റ് ക്ലീനിംഗ്

Regularly clean the dual-layer filter basket to maintain optimal cleaning performance. Always turn off the device before cleaning the filters to prevent any electrical hazards. The anti-blockage design minimizes maintenance, but periodic cleaning is essential.

Figure 7: Filter Basket Cleaning

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your AquaSense 2 Pro, consider the following common solutions:

• കണക്റ്റിവിറ്റി പ്രശ്നങ്ങൾ: Ensure the robot is powered on and within WiFi range. Restarting the app or the robot can often resolve connection problems.
• Suboptimal Cleaning: Verify the filter basket is clean and properly installed. Ensure the robot is operating in the correct mode for your pool's needs (e.g., Pro mode for full coverage).
• Shallow Areas/Ledges: For pools with steps or shallow ledges, ensure the MultiZone App Mode is activated via the app to ensure seamless coverage.
• Retrieval Difficulty: Utilize the SmartDrain feature to release water from the robot before lifting it out of the pool.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി & പിന്തുണ

The Beatbot AquaSense 2 Pro comes with a 3-Year Full Replacement Protection. This industry-leading warranty ensures full machine replacement instead of repairs, providing peace of mind.

For additional support, refer to the included User Manual or visit the Beatbot website. Beatbot is committed to providing world-class support for an exceptional pool care experience.