Empura EGM-13B Reach-In Refrigerator User Manual

ആമുഖം

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Empura EGM-13B 23-inch Reach-In Refrigerator. This commercial merchandiser is designed for displaying beverages and other refrigerated items in convenience stores and grocery environments, offering 13 cubic feet of storage with energy-efficient features.

ചിത്രം 1: കോണാകൃതിയിലുള്ളത് view of the Empura EGM-13B Reach-In Refrigerator, showcasing its black exterior and glass door.

സുരക്ഷാ വിവരങ്ങൾ

Please read all safety instructions carefully before operating the appliance. Failure to follow these instructions may result in property damage, injury, or death.

• ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure the unit is connected to a grounded 115V, 60Hz power supply with a NEMA-5-15P plug. Do not use extension cords.
• റഫ്രിജറൻറ്: This unit uses R290a refrigerant. Servicing should only be performed by qualified personnel.
• വെൻ്റിലേഷൻ: Maintain adequate clearance around the unit for proper ventilation to prevent overheating.
• പ്ലേസ്മെൻ്റ്: Place the unit on a level, stable surface capable of supporting its weight when fully loaded.
• വൃത്തിയാക്കൽ: വൃത്തിയാക്കുന്നതിന് മുമ്പ് വൈദ്യുതി ബന്ധം വിച്ഛേദിക്കുക. നേരിയതും, ഉരച്ചിലുകൾ ഇല്ലാത്തതുമായ ക്ലീനറുകൾ ഉപയോഗിക്കുക.
• നീക്കുന്നു: Use caution when moving the unit, especially when loaded. Utilize the factory-installed casters.

അൺപാക്കിംഗും സജ്ജീകരണവും

1 അൺപാക്ക് ചെയ്യുന്നു

Carefully remove all packaging materials, including foam insulation and protective films. Inspect the unit for any shipping damage. Report any damage to your supplier immediately.

2. കാസ്റ്റർ ഇൻസ്റ്റാളേഷൻ

The unit comes with factory-installed casters for easy mobility. Two of the casters are equipped with locking mechanisms to secure the unit in place.

Figure 2: Detail of a locking caster. Engage the lever to lock the wheel and prevent movement.

3. പ്ലേസ്മെന്റ്

Position the refrigerator in a location with adequate air circulation. Avoid direct sunlight or proximity to heat-generating appliances. Ensure the unit is level to allow for proper door sealing and drainage.

4. പ്രാരംഭ പവർ-അപ്പ്

After placement, allow the unit to stand upright for at least 2 hours before plugging it into a power outlet. This allows the refrigerant to settle. Connect the power cord to a dedicated 115V outlet.

Figure 3: The power cord connection point, located at the rear bottom of the unit.

ഓപ്പറേഷൻ

1. പവർ സ്വിച്ചുകൾ

The unit features main power and light switches, typically located near the bottom front of the unit. Turn on the main power switch to activate the refrigeration system and the light switch for interior illumination.

Figure 4: Red rocker switches for main power and interior lighting control.

2. താപനില നിയന്ത്രണം

The refrigerator is equipped with a digital LED temperature display and an electronic thermostat for precise temperature management. The factory preset temperature range is 33°F to 41°F (0.5°C to 5°C).

• Viewing Temperature: The current internal temperature is displayed on the LED screen.
• താപനില ക്രമീകരിക്കൽ: Refer to the specific instructions for the electronic thermostat model (e.g., Dixell controller) for detailed temperature setting procedures. Generally, a "SET" button is used to enter programming mode, and arrow keys adjust the value.

Figure 5: Digital control panel with LED display and control buttons for temperature adjustment.

3. Adjustable Shelving

The unit includes five heavy-duty, adjustable wire shelves with a polyethylene coating. These shelves can be repositioned to accommodate various product sizes.

• ക്രമീകരിക്കാൻ: Empty the shelf, lift it slightly, and slide it out of its supports. Reinsert into desired slots.

Figure 6: Interior of the refrigerator showing the five adjustable wire shelves.

4. Door Operation and Lock

The unit features a self-closing glass door with a secure locking mechanism. The self-closing feature helps maintain internal temperature and energy efficiency.

• ലോക്കിംഗ്: Use the provided keys to lock the door for added security.

Figure 7: The door lock mechanism with accompanying keys for securing the unit.

മെയിൻ്റനൻസ്

1. വൃത്തിയാക്കൽ

പതിവായി വൃത്തിയാക്കുന്നത് മികച്ച പ്രകടനവും ശുചിത്വവും ഉറപ്പാക്കുന്നു.

• ഇൻ്റീരിയർ: Disconnect power. Remove shelves and clean with a mild detergent and warm water. Wipe dry. Clean the interior walls with a damp തുണിയും വീര്യം കുറഞ്ഞതും ഉരച്ചിലുകളില്ലാത്തതുമായ ക്ലീനറും.
• പുറം: Wipe the black baked-enamel steel exterior with a soft cloth and mild cleaner.
• ഗ്ലാസ് വാതിൽ: Use a glass cleaner for streak-free results.
• കണ്ടൻസർ കോയിൽ: The condenser coil should be cleaned regularly (monthly or quarterly depending on environment) to maintain efficiency. Disconnect power. Use a brush or vacuum cleaner to remove dust and debris from the coil located at the bottom rear of the unit.

2. Defrost System

This unit features an automatic timed defrost system. During defrost cycles, the evaporator fan may temporarily stop, and the temperature display might fluctuate slightly. This is normal operation.

3. Gasket Inspection

Regularly inspect the door gasket for cracks or tears. A damaged gasket can lead to air leaks and reduced cooling efficiency. Replace if necessary.

ട്രബിൾഷൂട്ടിംഗ്

For issues not listed or if solutions do not resolve the problem, please contact qualified service personnel.

സ്പെസിഫിക്കേഷനുകൾ

Figure 8: Visual representation of key specifications and dimensions for the Empura EGM-13B.

വാറൻ്റിയും പിന്തുണയും

Empura products are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Empura webസൈറ്റ്.

For technical support, service inquiries, or to order replacement parts, please contact Empura customer service. Have your model number (EGM-13B) and serial number ready when contacting support.

കൂടുതൽ വിവരങ്ങളും ബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങളും നിങ്ങൾക്ക് ഇവിടെ കണ്ടെത്താനാകും ആമസോണിലെ എമ്പുര സ്റ്റോർ.