ആമുഖം
This manual provides comprehensive instructions for the installation, operation, and maintenance of your EMKE 70x140cm Foldable Bathtub Shower Screen. Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
സുരക്ഷാ നിർദ്ദേശങ്ങൾ
പൊതു സുരക്ഷ:
- Always handle glass components with care. Tempered glass is strong but can shatter if struck forcefully at the edges.
- ഇൻസ്റ്റാളേഷൻ സമയത്ത് സുരക്ഷാ ഗ്ലാസുകളും കയ്യുറകളും ഉൾപ്പെടെ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക.
- Ensure the installation area is clean, dry, and well-lit.
- ഇൻസ്റ്റലേഷൻ ഏരിയയിൽ നിന്ന് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.
- Do not attempt to install the shower screen alone. Two people are recommended for safe handling and installation.
ഉപയോഗ സമയത്ത്:
- Do not hang heavy objects on the shower screen.
- Avoid using abrasive cleaners or sharp objects on the glass or aluminum frame, as this can damage the surfaces.
- Ensure the screen is properly folded or extended before and after use to prevent accidental impact.
പാക്കേജ് ഉള്ളടക്കം
Before beginning installation, verify that all components are present and undamaged. If any parts are missing or damaged, please contact EMKE customer support.
- ഗ്ലാസ് പാനൽ
- മുദ്രകൾ
- സ്ക്രൂകൾ
- വാൾ പ്രോfile
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The EMKE Foldable Bathtub Shower Screen is designed for straightforward installation. Detailed assembly instructions are included with the product. It is recommended that two people perform the installation.
- ഇൻസ്റ്റലേഷൻ ഏരിയ തയ്യാറാക്കുക: Ensure the bathtub edge and adjacent wall are clean, dry, and level.
- Position the Wall Profile: വാൾ പ്ലെയ്സ് പ്രോfile against the wall at the desired height, ensuring it is plumb. Mark the drilling points.
- Drill Holes and Secure Profile: Drill holes at the marked points and insert wall plugs. Secure the wall profile നൽകിയിരിക്കുന്ന സ്ക്രൂകൾ ഉപയോഗിച്ച് മതിലിലേക്ക്.
- Attach Glass Panel: Carefully insert the glass panel into the wall profile.
- Install Seals: Attach the appropriate seals to the bottom and sides of the glass panel to ensure a watertight fit with the bathtub.
- ടെസ്റ്റ് ഓപ്പറേഷൻ: Once installed, gently open and close the shower screen to ensure smooth operation and proper sealing.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The EMKE Foldable Bathtub Shower Screen is designed for ease of use and flexibility.
- Extending the Screen: To use the shower screen, gently pull the glass panel outwards until it is fully extended and aligned with the edge of your bathtub. This creates a splash barrier.
- Folding the Screen: After showering, the screen can be folded inwards or outwards by 180 degrees to save space and allow easier access to the bathtub. Gently push the panel to fold it.
- Lift and Lower Mechanism: The screen features a 4mm lift and lower mechanism. When opening, the panel slightly lifts to protect the bottom seal from wear. When closed, it lowers to create a tight seal with the bathtub, reducing noise and preventing water leakage.
മെയിൻ്റനൻസ്
Regular cleaning and maintenance will ensure the longevity and appearance of your EMKE Bathtub Shower Screen.
- ഗ്ലാസ് വൃത്തിയാക്കൽ: The 6mm tempered glass features a nano-coating for easy cleaning. Use a soft cloth and mild, non-abrasive glass cleaner. Wipe down the glass after each use to prevent water spots and soap scum buildup.
- ഫ്രെയിം ക്ലീനിംഗ്: Clean the aluminum frame with a soft, damp cloth and mild soap. Avoid harsh chemicals or abrasive sponges, which can damage the finish.
- സീൽ പരിപാലനം: Periodically check the PVC seals for wear or damage. Clean them gently with mild soap and water. Replace seals if they become brittle or damaged to maintain water tightness.
- ഹിഞ്ച് പരിപാലനം: The hinges are designed for durability. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the moving parts, avoiding contact with the glass.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter with your shower screen.
- വെള്ളം ചോർച്ച:
- Check that all seals are properly installed and are not damaged.
- Ensure the shower screen is fully closed and lowered against the bathtub edge.
- Verify that the wall profile is securely mounted and sealed to the wall.
- Screen Does Not Fold Smoothly:
- Inspect hinges for any obstructions or debris.
- Apply a small amount of silicone lubricant to the hinge mechanisms if they feel stiff.
- Glass Appears Streaky After Cleaning:
- Ensure you are using a non-abrasive glass cleaner and a clean, soft cloth.
- Wipe dry immediately after cleaning to prevent water spots.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ഇ.എം.കെ |
| മോഡൽ | 70x140 സെ.മീ |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 6 x 70 x 140 സെ.മീ |
| ഭാരം | 16 കിലോഗ്രാം |
| ഗ്ലാസ് കനം | 6 മില്ലിമീറ്റർ |
| മെറ്റീരിയൽ | ടെമ്പർഡ് ഗ്ലാസ് |
| പൂർത്തിയാക്കുക | തിളങ്ങുന്ന |
| നിറം | Chrome |
| പാനലുകളുടെ എണ്ണം | 1 |
| ഇൻസ്റ്റലേഷൻ തരം | Freestanding (Wall-mounted) |
| ഘടകങ്ങൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ട് | Glass, seals, screws, wall profile |
| Model Number (Reference) | NFASS70E-EMVC |
വാറൻ്റിയും പിന്തുണയും
EMKE offers a 2 വർഷത്തെ വാറൻ്റി for your shower screen, ensuring peace of mind with your purchase. This warranty covers manufacturing defects and material faults under normal use.
If you encounter any issues or require assistance with your EMKE Bathtub Shower Screen, please contact EMKE customer support. Have your model number (70x140cm) and purchase details ready when contacting support.
For further information or to report a problem, please refer to the contact details provided with your product packaging or visit the official EMKE webസൈറ്റ്.
