സിഗ്മാടെക് എലിസിയം II ഫുൾ ടവർ പിസി കേസ് യൂസർ മാനുവൽ

1. ആമുഖം

Thank you for choosing the Xigmatek Elysium II Full Tower PC Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer chassis. Please read this manual thoroughly before beginning assembly to ensure proper installation and optimal performance.

Figure 1.1: Xigmatek Elysium II Full Tower PC Case with illuminated ARGB fans.

പ്രധാന സവിശേഷതകൾ:

• Four-sided tempered glass panels for a premium aesthetic and component visibility.
• Supports motherboards up to SSI EEB/CEB and E-ATX for high-end workstation and gaming builds.
• Extensive cooling support with pre-installed 16 x 140mm ARGB square ring fans.
• Accommodates large liquid cooling radiators: Top (up to 420mm), Front (up to 480mm), Rear (up to 280mm).
• CPU cooler height support up to 220mm.
• Graphics card length support up to 460mm.
• Convenient top I/O panel with USB Type-C x 1, USB 3.0 x 2, USB 2.0 x 1, and HD Audio Jack.

2 സ്പെസിഫിക്കേഷനുകൾ

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Before starting, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation steps.

3.1 പാക്കേജ് ഉള്ളടക്കം

• Xigmatek Elysium II Full Tower PC Case
• 16 x 140mm ARGB Square Ring Fans (pre-installed)
• 2 x Galaxy II Fan Control Boxes
• Remote Control Sets
• Accessory Box (screws, cable ties, standoffs, etc.)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

3.2 ഘടകം തിരിച്ചറിയൽ

Figure 3.1: Internal layout of the Elysium II case, highlighting fan mounts and component areas.

Figure 3.2: Rear internal view, showing cable management space and drive bay locations.

3.3 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

1. കേസ് തയ്യാറാക്കുക: Carefully remove the tempered glass panels. Lay the case on its side on a stable, flat surface.
2. മദർബോർഡ് ഇൻസ്റ്റാൾ ചെയ്യുക: Install the necessary standoffs for your motherboard form factor. Gently place your motherboard onto the standoffs and secure it with screws.
3. പവർ സപ്ലൈ യൂണിറ്റ് (പി‌എസ്‌യു) ഇൻസ്റ്റാൾ ചെയ്യുക: Mount your PSU into its designated compartment (top mount). Secure it with screws from the rear of the case. Route necessary cables through the cable management cutouts.
4. സ്റ്റോറേജ് ഡിവൈസുകൾ ഇൻസ്റ്റാൾ ചെയ്യുക: Locate the drive bays for 2.5" SSDs and 3.5" HDDs. Secure your storage devices using the provided screws or tool-less mechanisms.
5. Install Graphics Card (GPU) and Expansion Cards: Remove the necessary PCIe slot covers. Insert your graphics card and any other expansion cards into their respective slots on the motherboard and secure them.
6. കേബിളുകൾ ബന്ധിപ്പിക്കുക: Connect all power cables from the PSU to your motherboard, GPU, and storage devices. Connect the front panel I/O cables (USB, audio, power/reset buttons, LEDs) to the appropriate headers on your motherboard. Ensure all pre-installed fan cables and ARGB cables are connected to the fan control boxes and then to the motherboard or PSU as required.
7. കേബിൾ മാനേജുമെന്റ്: Utilize the cable routing channels and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.
8. Reinstall Panels: Once all components are installed and cables are managed, carefully reattach the tempered glass panels.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 പവർ ചെയ്യുന്നു

After completing the installation, connect your monitor, keyboard, mouse, and power cable to the PSU. Press the power button located on the top I/O panel of the case to start your system.

4.2 ARGB ഫാൻ നിയന്ത്രണം

The Elysium II comes with pre-installed ARGB fans and two Galaxy II fan control boxes. You can control the lighting effects and fan speeds using the included remote control. Refer to the Galaxy II fan control box manual for detailed instructions on changing modes, colors, and brightness. The reset button on the top I/O panel may also cycle through ARGB modes if connected to the controller's reset header.

4.3 ഫ്രണ്ട് I/O പോർട്ടുകൾ

The top I/O panel provides convenient access to:

• USB Type-C port for modern devices.
• USB 3.0 ports for high-speed data transfer.
• USB 2.0 port for general peripherals.
• HD Audio Jack for headphones and microphones.
• Reset button for system restart.

5. പരിപാലനം

നിങ്ങളുടെ പിസി ഘടകങ്ങളുടെ ദീർഘായുസ്സും ഒപ്റ്റിമൽ പ്രകടനവും ഉറപ്പാക്കാൻ പതിവ് അറ്റകുറ്റപ്പണികൾ സഹായിക്കുന്നു.

• പൊടി ഫിൽട്ടറുകൾ: The Elysium II case is equipped with removable dust filters. Periodically remove and clean these filters (e.g., with compressed air or by washing with water and drying thoroughly) to prevent dust buildup inside the case, which can impede airflow and cooling.
• ബാഹ്യ ശുചീകരണം: ഒരു സോഫ്റ്റ് ഉപയോഗിക്കുക, ഡിamp cloth to wipe down the exterior surfaces, including the tempered glass panels. Avoid abrasive cleaners or solvents that could damage the finish.
• ഇന്റീരിയർ ക്ലീനിംഗ്: With the system powered off and unplugged, use compressed air to remove dust from internal components, especially fan blades and heatsinks.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your PC case, consider the following common problems and solutions:

• ശക്തിയില്ല:
  • Ensure the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
  • Verify that the 24-pin ATX power cable and 8-pin CPU power cable are securely connected to the motherboard.
  • മദർബോർഡിന്റെ മുൻ പാനൽ ഹെഡറുമായി ഫ്രണ്ട് പാനൽ പവർ ബട്ടൺ കേബിൾ ശരിയായി ബന്ധിപ്പിച്ചിട്ടുണ്ടോയെന്ന് പരിശോധിക്കുക.
• Fans Not Spinning / RGB Not Lighting Up:
  • Confirm that all fans are properly connected to the fan control boxes.
  • Ensure the fan control boxes are receiving power from the PSU (usually via SATA power connector).
  • Check that the ARGB cables from the control boxes are connected to the motherboard's ARGB header (if applicable) or that the remote control is functioning and has fresh batteries.
• Front USB Ports Not Working:
  • Verify that the USB 3.0, USB 2.0, and USB Type-C cables from the front panel are securely connected to the corresponding headers on your motherboard.
• No Audio from Front Jack:
  • Ensure the HD Audio cable from the front panel is correctly connected to the audio header on your motherboard.

For persistent issues, consult the Xigmatek support webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ സേവനവുമായി ബന്ധപ്പെടുക.

7. വാറൻ്റിയും പിന്തുണയും

Xigmatek products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Xigmatek webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.