1. ആമുഖം
This manual provides essential instructions for the safe and effective use of your REPTITRIP 8.5-Inch Day/Night Thermostatic Reptile Heat Lamp. This system is designed to provide a controlled heating environment for reptiles, simulating natural day-night temperature cycles. It includes a ceramic heat emitter, a light fixture, and a dimming thermostat for precise temperature regulation.
2 സുരക്ഷാ വിവരങ്ങൾ
- ഉയർന്ന താപനില മുന്നറിയിപ്പ്: ചൂട് എൽamp surface can reach high temperatures during operation. A warning sticker on the lamp turns red at 113°F (45°C) to indicate this.
- പ്ലേസ്മെൻ്റ്: Always keep a safe distance between the heat lamp and flammable materials, as well as your reptiles, to prevent burns or fire hazards.
- Indoor Dry Use Only: This product is intended for indoor, dry environments. Do not expose to water or high humidity.
- ബൾബ് അനുയോജ്യത: This fixture is compatible with reptile heat bulbs and ceramic heat emitters up to 150W. It is അനുയോജ്യമല്ല with LED lights or sun lamps.
- ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure the power supply matches the product's voltage requirements (100-120 Volts, 60 Hertz). Do not overload electrical outlets.
Image: Close-up of the warning sticker on the heat lamp, indicating 'CAUTION: HOT SURFACE AVOID CONTACT FOR INDOOR DRY USE ONLY'.
3. ബോക്സിൽ എന്താണുള്ളത്?
അൺപാക്ക് ചെയ്യുമ്പോൾ, എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:
- 8.5-INCH Reptile Light Fixture
- Reptile Thermostat
- 150W Ceramic Heat Emitter
Image: The complete REPTITRIP reptile heat lamp system, including the 8.5-inch lamp fixture, the digital thermostat controller, and the ceramic heat emitter bulb.
4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
- Install the Ceramic Heat Emitter: Carefully screw the 150W ceramic heat emitter into the E26 socket of the 8.5-inch light fixture. Ensure it is securely tightened but do not overtighten.
- Position the Light Fixture: Place the light fixture securely above your reptile enclosure. Use the integrated hanging hook if suspending the lamp. Ensure adequate clearance from the enclosure walls and any inhabitants.
- തെർമോസ്റ്റാറ്റ് ബന്ധിപ്പിക്കുക: Plug the light fixture's power cord into the designated output on the REPTITRIP thermostat controller.
- Position the Temperature Probe: Carefully place the temperature probe inside the reptile enclosure. Position it in the area where you want to maintain a stable temperature, typically near the basking spot or a central location, ensuring it is not directly under the heat lamp or accessible to your pet.
- പവർ ഓൺ: Plug the thermostat's power cord into a suitable electrical outlet.
Video: A demonstration of how to set up the REPTITRIP Day/Night Thermostat, including probe placement and initial programming steps.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The REPTITRIP thermostat allows for precise control over day and night temperatures, simulating natural circadian cycles. Refer to the LCD display and buttons for programming.
ചിത്രം: വിശദമായത് view of the thermostat's LCD screen showing current time, ambient temperature, output power, and set temperature, along with the SET, OK, plus, and minus buttons.
അടിസ്ഥാന പ്രവർത്തനം:
- പവർ ഓൺ/ഓഫ്: ദീർഘനേരം അമർത്തുക OK button to turn the thermostat on or off.
- ക്രമീകരണ മോഡ് നൽകുക: ദീർഘനേരം അമർത്തുക സെറ്റ് ക്രമീകരണ മോഡിൽ പ്രവേശിക്കാൻ ബട്ടൺ.
- മൂല്യങ്ങൾ ക്രമീകരിക്കുക: ഉപയോഗിക്കുക + ഒപ്പം - മൂല്യങ്ങൾ ക്രമീകരിക്കാനുള്ള ബട്ടണുകൾ.
- Confirm/Toggle: അമർത്തുക OK button to confirm a setting or toggle between different parameters within the setting mode.
- ക്രമീകരണങ്ങൾ സംരക്ഷിക്കുക: After adjusting a setting, long press the സെറ്റ് ക്രമീകരണ മോഡിൽ നിന്ന് സംരക്ഷിക്കാനും പുറത്തുകടക്കാനുമുള്ള ബട്ടൺ.
Setting Day/Night Temperatures (Exampലെ):
Follow these steps to program your desired day and night temperatures and times. An example setting is provided for clarity.
- നിലവിലെ സമയം: 10:00 AM
- T1 (Day Start Time): 7:20 AM
- SV (Daytime Target Temp): 100°F
- T2 (Night Start Time): 6:30 PM
- SV (Nighttime Target Temp): 80°F
- നിലവിലെ സമയം സജ്ജമാക്കുക: ദീർഘനേരം അമർത്തുക സെറ്റ് to enter setup mode. Adjust the time using +/-. അമർത്തുക OK to move between hours and minutes. Long press സെറ്റ് again to save and proceed to T1 time setting.
- Set Day Start Time (T1): Adjust T1 to 7:20 AM using +/-. After T1 is set, press OK to toggle to the Daytime Target Temperature setting.
- Set Daytime Target Temperature: Adjust the daytime target temperature to 100°F using +/-. ദീർഘനേരം അമർത്തുക സെറ്റ് to save and proceed to T2 time setting.
- Set Night Start Time (T2): Adjust T2 to 6:30 PM using +/-. After T2 is set, press OK to toggle to the Nighttime Target Temperature setting.
- Set Nighttime Target Temperature: Adjust the nighttime target temperature to 80°F using +/-. ദീർഘനേരം അമർത്തുക സെറ്റ് to save all settings and exit.
Image: A visual guide illustrating the process of setting distinct day and night temperatures and their corresponding start times on the thermostat for a 24-hour cycle.
Image: A reptile terrarium setup demonstrating the heat lamp in operation, with the thermostat displaying the current day and night temperature settings, emphasizing the importance of diurnal temperature variations.
Image: A graph depicting temperature fluctuations over a 24-hour period, showing how the thermostat maintains a stable daytime temperature (orange line) and a stable nighttime temperature (blue line) for optimal reptile health.
6. പരിപാലനം
- വൃത്തിയാക്കൽ: Disconnect power before cleaning. Wipe the exterior of the lamp fixture and thermostat with a dry, soft cloth. Do not use abrasive cleaners or immerse any part in water.
- ബൾബ് മാറ്റിസ്ഥാപിക്കൽ: എൽ ഉറപ്പാക്കുകamp is unplugged and completely cool before attempting to replace the ceramic heat emitter. Handle the new bulb carefully and screw it in firmly.
- അന്വേഷണ പരിശോധന: Periodically check the temperature probe for any damage or debris that might affect its accuracy.
7. പ്രശ്നപരിഹാരം
- Lamp ചൂടാക്കുന്നില്ല:
- Check if the thermostat is powered on and plugged in correctly.
- Verify the ceramic heat emitter is screwed in properly and not burnt out. Replace if necessary.
- Ensure the set temperature is above the current ambient temperature.
- താപനില വ്യതിയാനങ്ങൾ:
- Ensure the temperature probe is correctly positioned and not directly exposed to drafts or direct heat from the lamp.
- Check for external factors affecting terrarium temperature, such as room temperature changes.
- പ്രോഗ്രാമിംഗിലെ ബുദ്ധിമുട്ട്:
- Refer to the 'Operating Instructions' section and the provided video for detailed steps.
- Ensure you are long-pressing the സെറ്റ് button to enter and save settings, and short-pressing OK to toggle between parameters.
8 സ്പെസിഫിക്കേഷനുകൾ
Image: A visual representation of the product specifications, including input voltage, output load, temperature setting range, and control mode, as seen on the thermostat's display.
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് | REPTITRIP |
| മോഡലിൻ്റെ പേര് | LF08X-set |
| ലൈറ്റ് തരം | Ceramic Heat Emitter |
| പ്രത്യേക ഫീച്ചർ | Day/Night Dimming and Constant Temperature |
| വാട്ട്tage (പരമാവധി) | 150 വാട്ട്സ് |
| ബൾബ് ബേസ് | E26 |
| വാല്യംtage | 100-120 വോൾട്ട് |
| ആവൃത്തി | 60 ഹെർട്സ് |
| താപനില നിയന്ത്രണ പരിധി | 68°F മുതൽ 113°F വരെ (20°C മുതൽ 45°C വരെ) |
| മെറ്റീരിയൽ | Acrylonitrile Butadiene Styrene (ABS), Aluminum, Ceramic |
| ഉൽപ്പന്ന അളവുകൾ | 8.5"ആംശം x 6.5"ആംശം |
| ഇനത്തിൻ്റെ ഭാരം | 1.61 പൗണ്ട് |
Compatible Heating Devices:
- Ceramic Heat Emitters
- Daytime Heat Bulbs
- Infrared Heat Bulbs
Incompatible Heating Devices:
- LED UVB ബൾബുകൾ
- UVA UVB Sun Bulbs
- കോംപാക്ട് ഫ്ലൂറസന്റ് എൽamps
Image: A chart detailing which types of reptile heating devices are compatible with the REPTITRIP system (Ceramic Heat Emitter, Daytime Heat Bulbs, Infrared Heat Bulbs) and which are not (LED UVB Bulbs, UVA UVB Sun Bulbs).
9. വാറൻ്റിയും പിന്തുണയും
Warranty information for this product is not provided in the current documentation. For specific warranty details, technical support, or customer service inquiries, please contact REPTITRIP directly through their official channels or the retailer from whom the product was purchased.
