Hemudu Dual Monitor Articulating Desk Mount Arm Stand

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Hemudu Dual Monitor Articulating Desk Mount Arm Stand (Model HD04W-001P) is designed to enhance your workspace by supporting two computer monitors in a vertical stack configuration. This stand provides ergonomic benefits, helps relieve strain on the neck, back, and shoulders, and optimizes desktop space. It is compatible with a wide range of monitors and offers versatile adjustability for a customized viewഅനുഭവം.

പ്രധാന സവിശേഷതകൾ:

• Screen Compatibility: Supports two screens from 13 to 34 inches, each weighing up to 44 pounds (20 kg).
• VESA പാലിക്കൽ: Compatible with VESA mounting patterns of 75x75mm and 100x100mm.
• എർഗണോമിക് ഡിസൈൻ: Allows monitors to be raised to an ergonomic height, reducing physical strain.
• Multifunction Adjustments: Offers -15° to +10° tilt, -50° to +50° swivel, 360° rotation, and 4+8 level height adjustments along the central pole.
• ഇൻസ്റ്റലേഷൻ ഓപ്ഷനുകൾ: Supports both C-clamp and grommet mounting methods.
• കേബിൾ മാനേജുമെന്റ്: Integrated detachable cable clips keep power and AV cables organized.
• സ്ഥലം ലാഭിക്കൽ: Holds two monitors on a single stand, freeing up valuable desktop space.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage, serious injury, or death. If you do not understand these instructions, or have doubts about the safety of the installation, please contact customer support.

• ഭാരം ശേഷി: Do not exceed the maximum weight capacity of 44 lbs (20 kg) per monitor. Overloading may cause instability and potential injury.
• മോണിറ്റർ വലുപ്പം: Ensure your monitors are within the supported size range of 13 to 34 inches.
• VESA അനുയോജ്യത: Verify that your monitors have VESA mounting holes (75x75mm or 100x100mm) before installation.
• ഡെസ്ക് കനം: Ensure your desk surface is strong enough to support the combined weight of the stand and monitors. For C-clamp installation, the desk thickness should be within the specified range (typically up to 2.9 inches or 74mm).
• സുരക്ഷിത ഇൻസ്റ്റാളേഷൻ: Always ensure all screws and bolts are securely tightened before placing monitors on the stand.
• കേബിൾ മാനേജുമെന്റ്: Route cables carefully to prevent pinching or snagging, which could damage cables or cause monitors to fall.
• കുട്ടികളും വളർത്തുമൃഗങ്ങളും: Keep children and pets away from the monitor stand during installation and adjustment.

3. പാക്കേജ് ഉള്ളടക്കം

Please check the package contents against the list below to ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• പ്രധാന പോൾ അസംബ്ലി
• Monitor VESA Plates (x2)
• C-Clamp അസംബ്ലി
• Grommet Mount Components
• കേബിൾ മാനേജ്മെന്റ് ക്ലിപ്പുകൾ
• Hardware Kit (screws, washers, spacers for VESA mounting)
• Tools (Allen keys, wrench)
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The Hemudu Dual Monitor Arm Stand offers two primary installation methods: C-clamp and Grommet mounting. Choose the method best suited for your desk.

4.1 നിങ്ങളുടെ മൗണ്ടിംഗ് രീതി തിരഞ്ഞെടുക്കുക

4.2 C-Clamp Installation (Method 1)

1. C-cl അറ്റാച്ചുചെയ്യുകamp പ്രധാന തൂണിന്റെ അടിയിലേക്ക് അടിത്തറ.
2. C-cl സ്ഥാപിക്കുകamp നിങ്ങളുടെ മേശയുടെ അരികിൽ.
3. C-cl മുറുക്കുകamp screw until the stand is securely fastened to the desk. Ensure the desk thickness does not exceed 74mm (2.9 inches).

4.3 Grommet Mounting (Method 2)

1. If your desk has an existing grommet hole, remove its cover. If not, you may need to drill a hole (consult a professional if unsure).
2. Assemble the grommet mount components to the main pole.
3. Insert the pole through the grommet hole and secure it from underneath the desk using the provided plate and nut.

4.4 Attaching Monitors

1. Attach the VESA plates to the back of your monitors using the appropriate screws, washers, and spacers from the hardware kit. Ensure the VESA pattern matches (75x75mm or 100x100mm).
2. Slide the VESA plates with attached monitors onto the mounting brackets on the main pole.
3. Secure the monitors to the brackets using the reinforcement knobs or screws as indicated in the diagram.

4.5 കേബിൾ മാനേജ്മെന്റ്

Utilize the integrated cable management clips on the main pole to route and organize your monitor cables. This helps maintain a clean and clutter-free workspace.

4.6 ഇൻസ്റ്റലേഷൻ വീഡിയോ ഗൈഡ്

ഇൻസ്റ്റലേഷൻ പ്രക്രിയയെക്കുറിച്ചുള്ള ഒരു വിഷ്വൽ ഗൈഡിന്, ദയവായി താഴെയുള്ള ഔദ്യോഗിക ഉൽപ്പന്ന വീഡിയോ പരിശോധിക്കുക:

5. പ്രവർത്തനവും ക്രമീകരണങ്ങളും

The Hemudu Dual Monitor Arm Stand offers extensive adjustability to achieve your preferred viewing angles and ergonomic setup.

5.1 ഉയരം ക്രമീകരിക്കൽ

The monitors can be adjusted vertically along the main pole. The stand features 4+8 level height adjustments, allowing you to position each monitor at an optimal height for your comfort.

5.2 ടിൽറ്റ് അഡ്ജസ്റ്റ്മെൻ്റ്

Each monitor can be tilted from -15° to +10°. Use the reinforcement knob on the VESA plate to adjust the tilt angle and then tighten it to secure the position.

5.3 സ്വിവൽ ക്രമീകരണം

Monitors can be swiveled -50° to +50° horizontally. This allows for flexible screen sharing or adjusting the viewമുഴുവൻ സ്റ്റാൻഡും അനക്കാതെ തന്നെ ആംഗിൾ ചെയ്യുക.

5.4 ഭ്രമണ ക്രമീകരണം

Monitors can be rotated 360° (portrait to landscape and vice versa) for different viewing orientations. Simply rotate the monitor to the desired position.

6. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your Hemudu Dual Monitor Arm Stand.

• വൃത്തിയാക്കൽ: ഒരു സോഫ്റ്റ്, ഡി തുണി ഉപയോഗിച്ച് സ്റ്റാൻഡ് തുടയ്ക്കുക.amp തുണി. ഫിനിഷിന് കേടുവരുത്തുന്ന അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
• ദൃഢത പരിശോധന: Periodically check all screws and connections, especially the C-clamp/grommet mount and VESA plate screws, to ensure they remain tight. Re-tighten if necessary.
• കേബിൾ പരിശോധന: Regularly inspect cables for any signs of wear or damage. Replace damaged cables immediately.

7. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your monitor stand, refer to the following common problems and solutions:

7.1 Monitor Sagging or Not Holding Position

• കാരണം: Tilt or swivel tension is too loose.
• പരിഹാരം: Locate the reinforcement knobs or tension screws on the VESA plate and tighten them until the monitor holds its position securely.

7.2 Stand Feels Unstable

• കാരണം: C-clamp or grommet mount is not sufficiently tightened, or desk surface is too thin/weak.
• പരിഹാരം: C-cl വീണ്ടും മുറുക്കുകamp or grommet mount. Ensure your desk meets the minimum thickness and strength requirements. If using C-clamp, verify the desk thickness is within 74mm.

7.3 ഉയരം ക്രമീകരിക്കുന്നതിലെ ബുദ്ധിമുട്ട്

• കാരണം: Mounting brackets are too tight on the pole, or debris is obstructing movement.
• പരിഹാരം: Loosen any screws that secure the mounting brackets to the pole slightly. Clean the pole and bracket channels if any obstruction is visible.

7.4 Monitors Not Aligned

• കാരണം: Monitors are not positioned correctly on the VESA plates or the VESA plates are not at the same height on the pole.
• പരിഹാരം: Adjust the height of each VESA plate independently along the pole. Ensure monitors are centered on their respective VESA plates.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

Hemudu products are manufactured with quality and care. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact our customer support.

ഉപഭോക്തൃ പിന്തുണ:

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Hemudu customer support through the retailer's platform or the official Hemudu website. Please have your product model number (HD04W-001P) and purchase information ready when contacting support.