മാനുവലുകൾ+

COSLUS E2

COSLUS അഡ്വാൻസ്ഡ് വാട്ടർ ഫ്ലോസർ മോഡൽ E2 ഇൻസ്ട്രക്ഷൻ മാനുവൽ

മോഡൽ: E2

ആമുഖം

This manual provides comprehensive instructions for the safe and effective use of your COSLUS Advanced Water Flosser Model E2. Designed for advanced oral hygiene, this device offers customizable cleaning experiences for various dental needs, including orthodontic care, braces, and sensitive gums. Please read this manual thoroughly before operating the device.

സുരക്ഷാ വിവരങ്ങൾ

കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

പാക്കേജ് ഉള്ളടക്കം

ഉൽപ്പന്നം കഴിഞ്ഞുview

The COSLUS Advanced Water Flosser Model E2 is engineered for superior oral cleaning. It features advanced high-frequency pulses (10-160 PSI, 1400 pulses/min) to effectively remove dental plaque. With 2 distinct modes (Floss and Massage) and 12 adjustable pressure settings, it caters to a wide range of users from ages 6 to 60, including those with braces or sensitive gums. The device includes a large 600ml detachable water tank for extended use and a patented nozzle storage box for hygienic organization of the included jet tips.

COSLUS Advanced Water Flosser E2 main unit with various jet tips and packaging.
Figure 1: COSLUS Advanced Water Flosser Model E2 with its accessories.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

  1. ഉപകരണം പ്ലഗ് ഇൻ ചെയ്യുക: Connect the power adapter to the device and plug it into a suitable electrical outlet. The device supports 110-220V.
  2. വാട്ടർ ടാങ്ക് നിറയ്ക്കുക: Detach the 600ml water tank from the base. Fill it with warm water (below 40°C / 104°F) for comfort. Reattach the tank securely to the base.
  3. നോസൽ ഇൻസ്റ്റാൾ ചെയ്യുക: Select the desired jet tip. Insert the nozzle into the hole at the top of the handle until you hear a "click," ensuring it is securely in place without any gaps.
  4. Select Mode and Pressure: Press the "ON/OFF" button on the main unit to power on. Choose between 'Floss' or 'Massage' mode using the 'M' button. Adjust the water pressure to your desired level using the dial (1-12). For first-time users or those with sensitive teeth, it is recommended to start with a lower setting (gear 1-2).
Diagram showing steps for filling water tank, installing nozzle, turning on power, choosing mode, adjusting pressure, and adjusting nozzle angle.
Figure 2: Step-by-step setup and initial adjustment guide.

Video 1: Demonstrates the setup process, including plugging in, filling the tank, and installing a nozzle.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

  1. നോസൽ സ്ഥാപിക്കുക: Lean over the sink. Place the nozzle at a 90-degree angle to your gum line, ensuring your lips are slightly closed around the nozzle to prevent splashing while allowing water to drain into the sink.
  2. ജലപ്രവാഹം ആരംഭിക്കുക: Slide the ON/OFF switch on the handle to the 'ON' position to begin water flow.
  3. Guide Along Gumline: Guide the water jet along your gumline and between teeth, pausing briefly between each tooth.
  4. ഓഫ് ചെയ്യുക: After cleaning, slide the ON/OFF switch on the handle to the 'OFF' position. Press the main unit's power button to turn off the device completely.

വീഡിയോ 2: കഴിഞ്ഞുview of the water flosser's features and basic operation.

മെയിൻ്റനൻസ്

Image showing the patented nozzle storage box with various jet tips, highlighting drainage holes for hygiene.
Figure 3: Patented nozzle storage box for dry and clean accessories.

ട്രബിൾഷൂട്ടിംഗ്

Phenomenon: You can hear the machine running, but no water comes out.

സാധ്യമായ കാരണം: The machine is on, water pressure level is above 6th level, and the handle is turned off.

കാരണം: This is the automatic protection state of the device under certain conditions. This is completely normal and not a fault. Please use it without worry!

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി & പിന്തുണ

For any questions, support, or warranty inquiries, please refer to the contact information provided in your product packaging or visit the official COSLUS webസൈറ്റ്.