ssontong CABE

ssontong CABE OBD Power Cable for Dash Camera User Manual

Model: CABE

ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your ssontong CABE OBD Power Cable and accompanying Dash Camera. Please read this manual thoroughly before use to ensure proper functionality and safety.

ഉൽപ്പന്നം കഴിഞ്ഞുview

പാക്കേജ് ഉള്ളടക്കം

  • ssontong CABE OBD Power Cable (Type-C output)
  • Dash Camera (Front only)
  • 32 ജിബി മെമ്മറി കാർഡ്
  • സക്ഷൻ കപ്പ് മ .ണ്ട്
  • യുഎസ്ബി കാർഡ് റീഡർ
  • ഇൻസ്റ്റലേഷൻ പ്രൈ ടൂൾ
  • കേബിൾ ക്ലിപ്പുകൾ
ssontong CABE OBD Power Cable and Dash Camera Kit

ചിത്രം 1: Complete ssontong CABE OBD Power Cable and Dash Camera kit, including the OBD power cable, dash camera, 32GB memory card, and installation accessories.

പ്രധാന സവിശേഷതകൾ

  • വിശാലമായ അനുയോജ്യത: Compatible with vehicles featuring OBD or OBD2 ports, and Type-C USB devices.
  • Dual Work Modes: ACC mode (ignition-controlled) and Monitor mode (24-hour continuous power).
  • കുറഞ്ഞ വോളിയംtagഇ സംരക്ഷണം: Automatically cuts power below 11.7V to protect the car battery.
  • പ്ലഗ് ആൻഡ് പ്ലേ ഇൻസ്റ്റലേഷൻ: Simple connection to the vehicle's OBD2 port.
  • Dash Camera Features: 1080FHD recording, 170° wide-angle lens, WDR technology, G-sensor, Loop Recording, Parking Monitoring.

സജ്ജമാക്കുക

1. Locate the OBD Port

The OBD (On-Board Diagnostics) port is typically located under the dashboard on the driver's side, often near the steering column or center console. Refer to your vehicle's manual if you have difficulty locating it.

Diagram showing common OBD port locations in a car

ചിത്രം 2: Common locations for the OBD or OBD II port within a vehicle's interior, typically found under the dashboard.

2. Install the Memory Card

Insert the provided 32GB memory card into the designated slot on the dash camera. Ensure it is inserted correctly until it clicks into place.

3. Mount the Dash Camera

Attach the suction cup mount to the dash camera, then secure the camera to your vehicle's windshield. Position it to ensure a clear view of the road ahead without obstructing your driving visibility.

Dash camera with suction cup mount and accessories

ചിത്രം 3: The dash camera unit with its suction cup mount, ready for installation on the windshield.

4. Connect the OBD Power Cable

  1. Plug the OBD connector of the power cable into your vehicle's OBD port.
  2. Connect the Type-C USB end of the power cable to your dash camera.
  3. Use the provided pry tool and cable clips to neatly route and secure the cable along the vehicle's interior trim, ensuring it does not interfere with driving controls.
Close-up of the OBD power cable with Type-C connector and mode switch

ചിത്രം 4: The ssontong CABE OBD power cable, showing the Type-C output and the mode selection switch.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

OBD Power Cable Modes

The OBD power cable features a switch to select between two operating modes:

  • Mode "O" (ACC Mode):
    • Power output begins when the car is ignited.
    • Power supply automatically stops 20 minutes after the car is turned off.
    • Ideal for standard driving recording.
  • Mode "-" (Monitor Mode):
    • Continuously supplies power for 24 hours.
    • Maintains operation until the car battery voltage drops below 11.7V, at which point power is automatically cut off to prevent battery drain.
    • Suitable for continuous parking monitoring.

Dash Camera Functions

  • ജി-സെൻസർ: Detects sudden impacts or collisions. When triggered, the current video segment is automatically locked and protected from being overwritten during loop recording.
  • ലൂപ്പ് റെക്കോർഡിംഗ്: The camera continuously records. When the memory card is full, the oldest unlocked video files are automatically overwritten by new recordings. Locked videos are not overwritten.
  • പാർക്കിംഗ് നിരീക്ഷണം: When the vehicle is parked, the dash camera can detect impacts and automatically begin recording, providing 24-hour surveillance when the OBD power cable is in Monitor Mode.
Illustrations of G-sensor, Loop Recording, and Parking Monitoring features

ചിത്രം 5: Visual explanation of the G-sensor, Loop Recording, and Parking Monitoring functionalities of the dash camera.

Advanced Dash Camera Features

  • 170° വൈഡ് ആംഗിൾ ലെൻസ്: വിശാലമായ ഒരു ഫീൽഡ് നൽകുന്നു view, covering multiple lanes of traffic to reduce blind spots.
  • WDR സാങ്കേതികവിദ്യ: Wide Dynamic Range technology enhances video quality in varying light conditions, ensuring clear recordings in both bright and dark environments.
  • രാത്രി കാഴ്ച: Equipped with a Sony Sensor, 6-Glass Lens, and F1.8 Aperture for improved clarity in low-light conditions, capturing details like license plates more effectively.
Diagram illustrating the 170-degree wide-angle view of the dash camera

ചിത്രം 6: The 170-degree wide-angle lens captures a broad view of the road, monitoring multiple lanes of traffic.

Comparison of video quality with and without WDR technology

ചിത്രം 7: Demonstration of WDR (Wide Dynamic Range) technology, showing improved image clarity in conditions that are either too bright or too dark.

Dash camera features for super night vision

ചിത്രം 8: Key components contributing to the dash camera's super night vision, including a Sony Sensor, 6-Glass Lens, and F1.8 Aperture.

മെയിൻ്റനൻസ്

  • വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the dash camera lens and screen. Avoid abrasive cleaners.
  • മെമ്മറി കാർഡ്: Periodically format the memory card (e.g., once a month) within the dash camera settings to ensure optimal performance and prevent data corruption. Back up any important videos before formatting.
  • കേബിൾ പരിശോധന: Regularly check the OBD power cable for any signs of wear or damage.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഡാഷ് ക്യാമറ പവർ ഓൺ ചെയ്യുന്നില്ല.
  • OBD cable not properly connected.
  • Vehicle's OBD port issue.
  • OBD cable in ACC mode and vehicle is off.
  • കാർ ബാറ്ററി വോള്യംtage വളരെ കുറവാണ് (11.7V-ൽ താഴെ).
  • Ensure the OBD cable is securely plugged into both the OBD port and the dash camera.
  • Check if the vehicle's ignition is on (for ACC mode).
  • Switch the OBD cable to Monitor Mode ("-") for continuous power.
  • Check car battery health.
Dash camera stops recording unexpectedly.
  • Memory card full (if loop recording is off or locked files occupy too much space).
  • മെമ്മറി കാർഡ് പിശക്.
  • വൈദ്യുതി തടസ്സം.
  • ലൂപ്പ് റെക്കോർഡിംഗ് പ്രാപ്തമാക്കിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Format the memory card. Replace if issues persist.
  • പവർ കേബിൾ കണക്ഷൻ പരിശോധിക്കുക.
മോശം വീഡിയോ നിലവാരം.
  • വൃത്തികെട്ട ലെൻസ്.
  • തെറ്റായ ക്രമീകരണങ്ങൾ.
  • അതിരൂക്ഷമായ വെളിച്ച സാഹചര്യങ്ങൾ.
  • ക്യാമറ ലെൻസ് വൃത്തിയാക്കുക.
  • Check dash camera settings (e.g., resolution, WDR).
  • WDR technology helps in varying light, but extreme conditions can still affect quality.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ബ്രാൻഡ്ssontong
മോഡലിൻ്റെ പേര്CABE
പവർ ഇൻപുട്ട്OBD/OBD2 Port (12-24V)
പവർ ഔട്ട്പുട്ട്ടൈപ്പ്-സി യുഎസ്ബി
കുറഞ്ഞ വോളിയംtagഇ സംരക്ഷണം11.7V (Automatic Cut-off)
Dash Camera Resolution1080FHD
ലെൻസ് ആംഗിൾ170° വൈഡ് ആംഗിൾ
സംഭരണം32GB Memory Card (Included)
പ്രത്യേക സവിശേഷതകൾG-Sensor, Loop Recording, Parking Monitoring, WDR, Night Vision
അനുയോജ്യമായ ഉപകരണങ്ങൾDash Cam, GPS Navigator, Radar Detector (Type-C)

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ssontong webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.