SONOFF ZBMINIR2 സിഗ്ബീ സ്മാർട്ട് ലൈറ്റ് സ്വിച്ച് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

The SONOFF ZBMINIR2 is a compact Zigbee smart switch designed to convert traditional light switches into smart, app-controlled devices. It requires a SONOFF Zigbee hub for full functionality and integrates with popular smart home platforms like Alexa and Google Home. This device acts as a Zigbee router to extend your network's range and supports various external switch types.

Image: Two SONOFF ZBMINIR2 Zigbee Smart Switches, showcasinഅവയുടെ ഒതുക്കമുള്ള ഡിസൈൻ.

പ്രധാന സവിശേഷതകൾ:

• Stable Zigbee Connection: Requires a SONOFF Zigbee hub. Functions as a repeater to extend network range and features a wall-piercing mode for enhanced signal strength.
• Open Source Platform Compatibility: Connects to Home Assistant via a Zigbee dongle in addition to the eWeLink app.
• ഒതുക്കമുള്ളതും വൈവിധ്യമാർന്നതും: 40% smaller than its predecessor, facilitating easier installation. Supports Rocker, Momentary, SPDT, and Door switches.
• ശബ്ദ നിയന്ത്രണം: Compatible with Alexa, Google Home, and IFTTT for hands-free operation after linking accounts.
• Scene & Timer Control: Schedule automatic light control and create custom scenes through the eWeLink app.

Image: The ZBMINIR2 is 40% smaller than the ZBMINI and offers up to 5 times wider signal coverage, reaching up to 200m in Turbo Mode in open environments.

2. സജ്ജീകരണം

2.1 സുരക്ഷാ വിവരങ്ങൾ

• Always turn off power at the circuit breaker before performing any electrical work.
• ഇൻസ്റ്റാളേഷൻ ഒരു യോഗ്യതയുള്ള ഇലക്ട്രീഷ്യൻ അല്ലെങ്കിൽ പ്രാദേശിക ഇലക്ട്രിക്കൽ കോഡുകൾക്കനുസൃതമായി നടത്തണം.
• Ensure the neutral line is present in your switch box, as it is required for this device.

2.2 ബോക്സിൽ എന്താണുള്ളത്

• SONOFF ZBMINIR2 Zigbee Smart Switch (quantity as per package)
• ഉപയോക്തൃ മാനുവൽ / ദ്രുത ഗൈഡ്

2.3 ടൂളുകൾ ആവശ്യമാണ്

• സ്ക്രൂഡ്രൈവർ (ഫിലിപ്സ് കൂടാതെ/അല്ലെങ്കിൽ ഫ്ലാറ്റ്ഹെഡ്)
• വയർ സ്ട്രിപ്പറുകൾ
• വാല്യംtage Tester (recommended)

2.4 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

1. പവർ ഓഫ്: Locate your circuit breaker and turn off the power to the light switch you intend to replace or modify. Verify power is off using a voltagഇ ടെസ്റ്റർ.
2. നിലവിലുള്ള സ്വിച്ച് നീക്കംചെയ്യുക: Carefully remove the existing switch panel and detach the original switch from the wall box. Disconnect the wires.
3. Wire the ZBMINIR2: Connect the wires to the ZBMINIR2 according to the provided wiring diagram. Ensure the neutral wire (N), live input (L In), live output (L Out), and external switch wires (S1, S2) are correctly connected and securely tightened.

Image: Detailed wiring instructions for the ZBMINIR2, showing connections for neutral, live input, live output, and external switch terminals.

4. Mount the ZBMINIR2: Carefully place the ZBMINIR2 inside the wall box, ensuring wires are not pinched.
5. Reinstall Switch Panel: Secure the original switch panel back onto the wall box.
6. പവർ ഓൺ: സർക്യൂട്ട് ബ്രേക്കറിൽ വൈദ്യുതി പുനഃസ്ഥാപിക്കുക.

2.5 Pairing with SONOFF Zigbee Hub

After successful installation and powering on, the ZBMINIR2 needs to be paired with your SONOFF Zigbee hub using the eWeLink app.

1. Open eWeLink App: Launch the eWeLink app on your smartphone.
2. Enter Scan Mode: Tap the '+' icon in the app and select 'Scan' to initiate device discovery.
3. QR കോഡ് സ്കാൻ ചെയ്യുക: Scan the QR code located on the ZBMINIR2 device.
4. ജോടിയാക്കൽ മോഡ് സജീവമാക്കുക: Long press the button on the ZBMINIR2 for 5 seconds. The green LED indicator will flash slowly, indicating it's in pairing mode.
5. Select Zigbee Gateway: In the eWeLink app, select your SONOFF Zigbee gateway (hub) to connect the device.
6. പൂർണ്ണമായ കൂട്ടിച്ചേർക്കൽ: Wait for the app to detect and add the ZBMINIR2. Once added, you can rename the device and assign it to a room.

Image: The ZBMINIR2 is compatible with various Zigbee hubs and platforms, including Amazon Echo devices, SONOFF Zigbee Bridges, and SmartThings Hub V3.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 eWeLink App Control

Once paired, you can control your ZBMINIR2 from anywhere using the eWeLink app.

• ഓൺ/ഓഫ് ടോഗിൾ ചെയ്യുക: Tap the device icon in the app to turn the connected light or appliance on or off.
• ഉപകരണ ക്രമീകരണങ്ങൾ: Access device settings to configure various options, including Detach Relay Mode, Power-on State, and more.

Image: The eWeLink app interface showing control over a smart switch, demonstrating how to effortlessly smartify your existing switch.

3.2 ശബ്ദ നിയന്ത്രണം

Integrate your ZBMINIR2 with voice assistants for convenient hands-free control.

• അലക്സ: Link your eWeLink account to Alexa. Use commands like "Alexa, turn on the [device name]" or "Alexa, turn off the [device name]".
• ഗൂഗിൾ ഹോം: Link your eWeLink account to Google Home. Use commands like "Hey Google, turn on the [device name]" or "Hey Google, turn off the [device name]".

Image: Demonstrates voice control with Alexa, along with icons for Smart Timer and Group Control features.

3.3 Scene and Timer Control

Automate your lighting based on schedules or specific conditions.

• ടൈമറുകൾ: Set single, repeating, or countdown timers to automatically turn devices on or off at specified times.
• സ്മാർട്ട് സീനുകൾ: Create custom scenes that trigger actions based on other smart devices, environmental conditions, or manual activation.

3.4 ഗ്രൂപ്പ് നിയന്ത്രണം

Control multiple ZBMINIR2 devices or other smart devices simultaneously by grouping them in the eWeLink app.

• ഗ്രൂപ്പുകൾ സൃഷ്ടിക്കുക: In the eWeLink app, select multiple devices and group them together.
• Control Group: Use a single command or tap to control all devices within the group.

3.5 Detach Relay Mode

This mode separates the control of the physical switch from the relay, allowing smart bulbs to remain powered while the physical switch acts as a trigger for smart scenes.

• Enable Detach Relay: Activate this mode in the device settings within the eWeLink app.
• സ്മാർട്ട് ബൾബ് അനുയോജ്യത: Ideal for use with smart bulbs, ensuring they remain online and controllable via the app or voice commands, even if the physical switch is toggled.

3.6 Zigbee Router Functionality

The ZBMINIR2 acts as a Zigbee router, extending the range and stability of your Zigbee network.

• നെറ്റ്‌വർക്ക് എക്സ്റ്റൻഷൻ: Helps to eliminate signal blind spots and improve communication between your Zigbee hub and other end devices.
• ടർബോ മോഡ്: Enhances signal coverage, allowing for greater distances between devices.

Image: An expansive Zigbee signal coverage diagram, showing the ZBMINIR2 acting as a router to boost signal strength and expand coverage for optimal performance.

3.7 Delay Power-on for Load Protection

This feature helps protect connected loads from potential damage caused by sudden power surges after an outage.

• Configurable Delay: Set a delay (e.g., 1s, 2s, 3s, 4s) for the device to power on after power restoration.
• Prevents High Currents: Staggers the power-on sequence of multiple loads, preventing high inrush currents that can occur when all devices turn on simultaneously.

Image: Illustrates the Delay Power-on feature for load protection, preventing harm from high currents when multiple loads turn on simultaneously after an outage.

4. പരിപാലനം

To ensure optimal performance and longevity of your SONOFF ZBMINIR2, consider the following maintenance practices:

• പതിവ് വൃത്തിയാക്കൽ: Keep the device and surrounding area free from dust and debris. Ensure the switch panel is clean.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: Periodically check the eWeLink app for available firmware updates. Updates can provide new features, performance improvements, and security enhancements.
• Network Health: Monitor your Zigbee network's health through your hub's interface to ensure stable connections.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues with your ZBMINIR2, refer to the following common troubleshooting steps:

• ഉപകരണം പ്രതികരിക്കുന്നില്ല:
  • Check if the device is powered on and the circuit breaker is not tripped.
  • Verify the Zigbee hub is online and functioning correctly.
  • Ensure the ZBMINIR2 is within range of the Zigbee hub or another router device.
  • Try restarting the Zigbee hub.
• ജോടിയാക്കൽ പ്രശ്നങ്ങൾ:
  • Confirm the ZBMINIR2 is in pairing mode (green LED flashing slowly).
  • Move the device closer to the Zigbee hub during the pairing process.
  • Ensure your eWeLink app and Zigbee hub firmware are up to date.
  • Reset the ZBMINIR2 to factory settings (refer to the quick guide for specific steps) and attempt pairing again.
• ശബ്ദ നിയന്ത്രണം പ്രവർത്തിക്കുന്നില്ല:
  • Check if your eWeLink account is correctly linked to Alexa or Google Home.
  • Ensure the device name in eWeLink matches the name used in your voice assistant app.
  • Verify your internet connection and the status of your voice assistant device.
• ഇടയ്ക്കിടെയുള്ള കണക്റ്റിവിറ്റി:
  • The ZBMINIR2 acts as a router; ensure you have a robust Zigbee mesh network with sufficient router devices.
  • Avoid placing the device near large metal objects or other sources of wireless interference.

6 സ്പെസിഫിക്കേഷനുകൾ

Image: Technical specifications and dimensions of the SONOFF ZBMINIR2.

7. വാറൻ്റി വിവരങ്ങൾ

Warranty information for the SONOFF ZBMINIR2 Zigbee Smart Light Switch is typically provided with the product packaging or available on the official SONOFF webവാറന്റി കവറേജ്, നിബന്ധനകൾ, വ്യവസ്ഥകൾ എന്നിവയെക്കുറിച്ചുള്ള വിശദാംശങ്ങൾക്ക് ദയവായി ഈ ഉറവിടങ്ങൾ പരിശോധിക്കുക.

8. ഉപഭോക്തൃ പിന്തുണ

For further assistance, technical support, or inquiries regarding your SONOFF ZBMINIR2, please visit the official SONOFF support website or contact their customer service team. You can often find FAQs, troubleshooting guides, and contact options on their webസൈറ്റ്.

Official SONOFF Webസൈറ്റ്: ആമസോണിലെ SONOFF സ്റ്റോർ