COSLUS USB-A മുതൽ ചിത്രം-8 വരെയുള്ള വാട്ടർ ഫ്ലോസർ ചാർജർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ
Model: USB A to Figure-8
1. ആമുഖം
This manual provides essential information for the safe and effective use of your COSLUS USB-A to Figure-8 Water Flosser Charger. Please read these instructions carefully before use and retain them for future reference.
The COSLUS charger is designed to provide a reliable and efficient power source for compatible water flossers, ensuring optimal performance and longevity of your device.
2 സുരക്ഷാ വിവരങ്ങൾ
- ഊർജ്ജ സ്രോതസ്സ്: Ensure the USB power adapter (not included) used with this charger meets local safety standards and provides a stable 5V output.
- അനുയോജ്യത: Only use this charger with water flossers that feature a compatible figure-8 (8-pin) charging port. Using it with incompatible devices may cause damage.
- പരിസ്ഥിതി: Do not expose the charger to water or excessive moisture. Use in a dry environment.
- നാശം: Inspect the cable for any signs of damage before each use. Do not use if the cable is frayed, bent, or otherwise compromised.
- കുട്ടികൾ: ചാർജർ കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- വേർപെടുത്തുക: Do not attempt to disassemble or modify the charger. This will void any warranty and may pose a safety risk.
3 അനുയോജ്യത
This COSLUS USB-A to Figure-8 charging cable is specifically designed for water flossers equipped with an 8-pin figure-8 charging port. It is compatible with the following COSLUS models and many other brands:
- COSLUS Models: C20 (F5020E), E40 (WFP14), C30 (FC5360), C31 (F5023)
- Other Compatible Brands/Models: Nicwell F5025, Oralfree F5025, Aquasonic, HANGSUN HOC460P-US, Nicefeel FC1599, Tovendor, Zerhunt (ensure figure-8 port)
പ്രധാന കുറിപ്പ്: Please verify that your water flosser has an 8-pin figure-8 charging port before using this cable. If you are unsure about compatibility, contact COSLUS support for assistance.

Figure 1: Universal Compatibility - The COSLUS charger is compatible with various water flossers featuring a figure-8 charging port.
4. സജ്ജീകരണവും കണക്ഷനും
To begin charging your water flosser, follow these steps:
- പവർ ഉറവിടത്തിലേക്ക് കണക്റ്റുചെയ്യുക: Insert the USB-A end of the charging cable into a compatible USB power adapter (e.g., wall charger, computer USB port, car charger, power bank).
- Connect to Water Flosser: Insert the figure-8 (8-pin) end of the charging cable firmly into the charging port of your water flosser.
- കണക്ഷൻ സ്ഥിരീകരിക്കുക: Ensure both ends of the cable are securely connected. The water flosser's charging indicator light should illuminate, indicating that charging has begun.

Figure 2: Charging Connection - Connect the figure-8 end to your water flosser and the USB-A end to a power source.

Figure 3: USB Port Compatibility - The charger can be used with various USB-A power sources.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once connected, the COSLUS charger will initiate charging. This original charging cord is designed for efficient power delivery, resulting in approximately 50% faster charging speeds compared to non-original chargers.
- ചാർജിംഗ് സൂചന: Refer to your water flosser's user manual for specific charging indicator behaviors (e.g., blinking light, solid light, color change).
- മുഴുവൻ ചാർജും: Disconnect the charger once your water flosser indicates a full charge to preserve battery health.
- സുരക്ഷാ സവിശേഷതകൾ: The charger incorporates protection against over-voltage, over-charge, and overheating to safeguard your water flosser's battery.
6. പരിപാലനം
Proper care of your charging cable will ensure its longevity and reliable performance:
- വൃത്തിയാക്കൽ: Wipe the cable with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- സംഭരണം: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable.
- കൈകാര്യം ചെയ്യൽ: Always grasp the plug ends when connecting or disconnecting the cable. Avoid pulling directly on the cable itself to prevent damage to the internal wires and connectors.
- ഈട്: The cable features a reinforced design to withstand over 5,000 bends, but excessive or sharp bending should still be avoided.

Figure 4: Enhanced Durability - The cable is constructed with precision materials and a reinforced design for increased lifespan.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|
| മോഡൽ നമ്പർ | USB A to Figure-8 |
| ബ്രാൻഡ് | കോസ്ലസ് |
| Connector Type (Input) | യുഎസ്ബി ടൈപ്പ് എ |
| Connector Type (Output) | Figure-8 (8-pin) |
| കേബിൾ തരം | യുഎസ്ബി ചാർജിംഗ് കേബിൾ |
| ഉൽപ്പന്ന അളവുകൾ | ഏകദേശം 47.24 x 0.39 x 0.59 ഇഞ്ച് (120 x 1 x 1.5 സെ.മീ) |
| ഭാരം | ഏകദേശം 0.63 ഔൺസ് (18 ഗ്രാം) |
| പ്രത്യേക സവിശേഷതകൾ | Portable, Safety Protection (Over-voltage, Over-charge, Overheating), Widely Compatible |
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം / പരിഹാരം |
|---|
| Water flosser not charging. | - കേബിളിന്റെ രണ്ട് അറ്റങ്ങളും സുരക്ഷിതമായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Verify the USB power source is functional (try a different USB port or adapter).
- Confirm your water flosser has a compatible figure-8 (8-pin) charging port.
- Check the cable for visible damage. Do not use if damaged.
|
| സ്ലോ ചാർജിംഗ്. | - Ensure you are using a suitable USB power adapter (e.g., 5V/1A or higher). Lower power adapters may charge slower.
- Avoid charging through unpowered USB hubs.
|
| Cable feels warm during charging. | A slight warmth is normal during charging. If the cable becomes excessively hot, disconnect it immediately and contact support. |
9. വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support, please refer to the documentation provided with your original COSLUS water flosser or visit the official COSLUS website. You may also contact COSLUS customer service directly for assistance with this charging cable.
COSLUS Official Webസൈറ്റ്: ആമസോണിലെ COSLUS സ്റ്റോർ