X-PRO ഹോക്ക് 60 ഗ്യാസ് പവർഡ് ഡേർട്ട് ബൈക്ക് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

Thank you for choosing the X-PRO Hawk 60 Gas Powered Dirt Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your new dirt bike. Please read this manual thoroughly before use to ensure proper handling and to maximize your riding experience. The X-PRO Hawk 60 is designed for recreational off-road use, featuring a powerful 58cc 4-stroke engine, CVT transmission, electric start, and disc brakes, making it suitable for young riders learning to ride.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Improper use of this motorcycle can cause serious injury or death. Always wear a helmet and appropriate safety gear, including gloves, long pants, and sturdy footwear. Never operate this vehicle on public roads. Never operate under the influence of drugs or alcohol. Never carry passengers. This dirt bike is not intended for sale in California.

മുന്നറിയിപ്പ്: Apply throttle gradually from a standing/starting position. If full throttle is applied from a standing/starting position, the front wheel of the motorcycle can raise up, causing you to be thrown off the motorcycle, resulting in serious injury or death.

മുന്നറിയിപ്പ്: This vehicle is intended for riders 16-ന് താഴെ years of age. Never operate over speeds too fast for your skill or road conditions.

3. പാക്കേജ് ഉള്ളടക്കം

Upon opening the package, ensure all components are present and undamaged. The package should contain:

• X-PRO Hawk 60 Dirt Bike (partially assembled)
• ഹാൻഡിൽബാർ ബ്രാക്കറ്റുകൾ
• ഫ്രണ്ട് ആൻഡ് റിയർ ചക്രങ്ങൾ
• ബ്രേക്ക് ഘടകങ്ങൾ
• നമ്പർ പ്ലേറ്റ്
• ഫെൻഡർ
• പരിശീലന ചക്രങ്ങൾ
• Toolkit (containing necessary wrenches, screwdrivers, etc.)
• ഉപയോക്തൃ മാനുവൽ

4. സജ്ജീകരണവും അസംബ്ലിയും

Some assembly is required before operating your X-PRO Hawk 60 dirt bike. Please follow these steps carefully:

1. അൺബോക്സിംഗ്: Carefully open the packing box and remove the motorcycle and all accessories. Ensure you have all necessary tools from the toolkit.
2. ഫ്രണ്ട് വീൽ ഇൻസ്റ്റാളേഷൻ: Remove the front brake caliper to prepare for installing the front wheel. Install the front wheel by placing the spacer before tightening the fixed nut. Reinstall the front brake caliper.
3. ഹാൻഡിൽബാർ ഇൻസ്റ്റലേഷൻ: Install the handlebar onto the triple clamp നൽകിയിരിക്കുന്ന ബോൾട്ടുകളും cl ഉം ഉപയോഗിച്ച്amps. Ensure it is centered and securely tightened.
4. റിയർ ഷോക്ക് ഇൻസ്റ്റലേഷൻ: Install the rear shock absorber, ensuring all bolts are tightened securely.
5. Front Fender and Number Plate: Install the front fender and then attach the number plate to the front of the handlebars.
6. പരിശീലന ചക്രങ്ങൾ: Attach the training wheels to the rear axle, ensuring they are securely fastened and provide proper balance. Find the proper fit of the extension. Fix one side then tighten the other side till they all tighten. Double-check extension and tightness. Ensure training wheels are well-fixed.
7. Fuel Line: For safety during transport, the airvent hose has been pulled out. Remove the rubber cap and insert the hose back into the airvent.
8. Handlebar Pad: Install the handlebar pad for added safety.
9. ബാറ്ററി കണക്ഷൻ: Connect the battery terminals. Ensure the positive (+) terminal (red wire) is connected first, followed by the negative (-) terminal (black/green wire).

അസംബ്ലി വീഡിയോകൾ:

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The X-PRO Hawk 60 features a simple, gearless operation, making it ideal for beginners.

1. ഇന്ധന മിശ്രിതം: This is a 2-stroke engine. Always use a 25:1 gas-to-oil mixture. Refer to the fuel container for proper mixing ratios.
2. ജ്വലനം: Insert the key into the ignition switch (located on the side of the bike) and turn it to the 'ON' position.
3. ഇന്ധന വാൽവ്: Locate the fuel valve (petcock) near the carburetor and turn it to the 'ON' position.
4. എഞ്ചിൻ ആരംഭിക്കുന്നു: Use the pull starter to ignite the engine. A single pull should be sufficient.
5. ത്രോട്ടിൽ നിയന്ത്രണം: The bike operates without gears. Once started, gently twist the throttle on the right handlebar to accelerate.
6. ബ്രേക്കിംഗ്: Use the brake levers on both handlebars to slow down and stop.
7. കിൽ സ്വിച്ച്: The kill switch (red button on the handlebar) will immediately shut off the engine. There is also a safety lanyard that will pull off and kill the engine if the rider falls.

6. പരിപാലനം

നിങ്ങളുടെ ഡേർട്ട് ബൈക്കിന്റെ ദീർഘായുസ്സിനും സുരക്ഷിതമായ പ്രവർത്തനത്തിനും പതിവ് അറ്റകുറ്റപ്പണികൾ നിർണായകമാണ്.

• ഇന്ധന സംവിധാനം: Regularly check the fuel lines and carburetor for any leaks or blockages. Ensure the correct fuel mixture is always used.
• ബ്രേക്കുകൾ: Inspect brake pads and cables regularly. Adjust or replace as needed to ensure optimal braking performance.
• ടയറുകൾ: Check tire pressure before each ride. Ensure tires are free from punctures or excessive wear.
• ചെയിൻ: ഡ്രൈവ് ചെയിൻ വൃത്തിയായി, ലൂബ്രിക്കേറ്റ് ചെയ്ത്, ശരിയായി ടെൻഷൻ ചെയ്ത് സൂക്ഷിക്കുക.
• ഫാസ്റ്റനറുകൾ: Periodically check all nuts, bolts, and fasteners for tightness. Tighten any loose components.
• എയർ ഫിൽട്ടർ: Clean or replace the air filter regularly to maintain engine performance.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റി

This product comes with a 1-month warranty. Please refer to the warranty card included in your package for full details and terms.

9. പിന്തുണ

For any questions, technical assistance, or parts inquiries, please contact X-PRO customer support. Our dedicated team is committed to providing fast and reliable support to ensure your satisfaction and a smooth riding experience.