1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The ALORAIR Storm 80X is a commercial-grade dehumidifier designed for efficient moisture removal in large spaces up to 2,100 square feet. It is capable of removing up to 170 pints of water per day at saturation (90°F, 90% RH) and 80 PPD at AHAM conditions. This unit features a robust rotomolded housing for durability, a built-in condensate pump for continuous drainage, and an intuitive control panel for easy operation.

Figure 1: ALORAIR Storm 80X Dehumidifier with retractable handle.
പ്രധാന സവിശേഷതകൾ:
- ഉയർന്ന കാര്യക്ഷമത: Removes up to 170 PPD (saturation) / 80 PPD (AHAM) with a COP performance of 2.4 L/KWh.
- വലിയ കവറേജ് ഏരിയ: Effective in spaces up to 2,100 square feet.
- Built-in Condensate Pump: Automatically drains water, eliminating manual emptying. Includes a 19.6 ft drain hose and 19.6 ft drain vertical height.
- Rotomolded Durability: Impact-resistant and warp-proof housing for reliable operation in challenging environments.
- പോർട്ടബിൾ ഡിസൈൻ: Compact dimensions (15.2"D x 14.4"W x 24.8"H) with large wheels and a retractable handle for easy transport.
- സ്മാർട്ട് കൺട്രോൾ പാനൽ: Features AUTO ON/OFF, Memory Starting, Auto Defrost, and real-time display of inlet/outlet temperature and humidity.
- ഓട്ടോമാറ്റിക് ഡിഫ്രോസ്റ്റ്: Prevents frost buildup on coils, ensuring continuous operation and energy efficiency.
- എളുപ്പമുള്ള പരിപാലനം: Washable MERV-1 filter for protection of internal components.
2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
Read all instructions carefully before operating the dehumidifier. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always connect the unit to a properly grounded electrical outlet.
- കേടായ പവർ കോർഡ് അല്ലെങ്കിൽ പ്ലഗ് ഉപയോഗിച്ച് യൂണിറ്റ് പ്രവർത്തിപ്പിക്കരുത്.
- ടിപ്പിംഗ് തടയാൻ യൂണിറ്റ് ഒരു സ്ഥിരതയുള്ള, നിരപ്പായ പ്രതലത്തിൽ സ്ഥാപിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- പ്രവർത്തന സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും യൂണിറ്റിൽ നിന്ന് അകറ്റി നിർത്തുക.
- എയർ ഇൻലെറ്റുകളോ ഔട്ട്ലെറ്റുകളോ തടയരുത്. ശരിയായ വായുസഞ്ചാരത്തിനായി യൂണിറ്റിന് ചുറ്റും മതിയായ ക്ലിയറൻസ് നിലനിർത്തുക.
- ഏതെങ്കിലും അറ്റകുറ്റപ്പണികൾ അല്ലെങ്കിൽ വൃത്തിയാക്കൽ നടത്തുന്നതിന് മുമ്പ് വൈദ്യുതി വിച്ഛേദിക്കുക.
- Do not use the unit in areas where flammable liquids or gases are stored.
- ഈ ഉപകരണം, അവരുടെ സുരക്ഷയ്ക്ക് ഉത്തരവാദിയായ ഒരു വ്യക്തി ഉപകരണത്തിൻ്റെ ഉപയോഗത്തെ സംബന്ധിച്ച മേൽനോട്ടമോ നിർദ്ദേശമോ നൽകിയിട്ടില്ലെങ്കിൽ, ശാരീരികമോ ഇന്ദ്രിയപരമോ മാനസികമോ ആയ കഴിവുകൾ കുറഞ്ഞതോ അനുഭവത്തിൻ്റെയും അറിവിൻ്റെയും അഭാവം ഉള്ള വ്യക്തികൾക്ക് (കുട്ടികൾ ഉൾപ്പെടെ) ഉപയോഗിക്കാൻ ഉദ്ദേശിച്ചുള്ളതല്ല.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
3.1 യൂണിറ്റ് അൺപാക്ക് ചെയ്യുന്നു
Carefully remove the dehumidifier from its packaging. Inspect the unit for any signs of damage during transit. Retain packaging materials for future storage or transport.
Video 1: Unboxing and initial setup of the ALORAIR Storm 80X Dehumidifier.
3.2 അസംബ്ലി കൈകാര്യം ചെയ്യുക
The retractable handle is designed for easy mobility. To extend the handle, loosen the two knobs on the sides, pull the handle upwards, and then tighten the knobs to secure it in place. To retract, reverse the process.

Figure 2: The retractable handle and large wheels facilitate easy movement of the unit.
3.3 ഡ്രെയിൻ ഹോസ് കണക്ഷൻ
Connect the provided 19.6 ft drain hose to the quick-connect fitting at the bottom rear of the unit. Ensure a secure connection to prevent leaks. Route the hose to a suitable drainage point, such as a floor drain or sink, ensuring the hose is not kinked or obstructed. The built-in pump can lift water up to 19.6 feet vertically.

Figure 3: Drain hose connection and pump drainage height capability.
3.4 പവർ കണക്ഷൻ
Plug the dehumidifier into a standard 115V grounded electrical outlet. The power cord can be neatly coiled and stored on the back of the unit when not in use or for transport.

ചിത്രം 4: പിൻഭാഗം view of the dehumidifier showing integrated cord and hose storage.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
4.1 കൺട്രോൾ പാനൽ ഓവർview
The Storm 80X features an intelligent touch control panel. It displays real-time inlet and outlet temperature, humidity, job hours, and total life hours. Buttons include Power, Purge, Menu, and Set.

ചിത്രം 5: വിശദമായി view of the intelligent touch control panel.
Video 2: Demonstration of the control panel and its functions.
4.2 ആവശ്യമുള്ള ഈർപ്പം ക്രമീകരിക്കൽ
- Press the 'Set' button to enter humidity adjustment mode.
- Use the arrow buttons to increase or decrease the desired humidity percentagഇ (25% മുതൽ 80% വരെ).
- The unit will automatically operate to maintain the set humidity level.
4.3 തുടർച്ചയായ മോഡ്
To operate the dehumidifier continuously, set the humidity level to 'CO%' (Continuous Mode) using the 'Set' and arrow buttons. In this mode, the unit will run constantly, removing moisture without stopping based on a set humidity level.
4.4 ഓട്ടോമാറ്റിക് സവിശേഷതകൾ
- ഓട്ടോ ഓൺ/ഓഫ്: The unit will automatically turn on or off based on the set humidity level.
- Memory Starting: ഒരു പവർ ഈtage, the unit will restart with the last settings once power is restored.
- ഓട്ടോ ഡിഫ്രോസ്റ്റ്: The system monitors ambient temperature and initiates a defrost cycle when low temperatures are detected, preventing ice buildup on coils. The compressor pauses while the fan continues, then resumes normal operation.
5. പരിപാലനം
Regular maintenance ensures optimal performance and extends the lifespan of your ALORAIR Storm 80X dehumidifier.
5.1 MERV-1 Filter Cleaning/Replacement
The unit is equipped with a washable MERV-1 filter. It is recommended to clean the filter every three months or more frequently depending on usage and environment. Replace the filter after two cleanings or as needed.
- വൈദ്യുതിയിൽ നിന്ന് യൂണിറ്റ് വിച്ഛേദിക്കുക.
- Locate the filter access panel on the front of the unit.
- ഫിൽട്ടർ നീക്കം ചെയ്യുക.
- Clean the filter with warm water and mild detergent, or vacuum it. Allow it to dry completely before reinstallation.
- Reinsert the clean filter and secure the access panel.
Video 3: Instructions for replacing the MERV-1 filter.
5.2 Drain System Maintenance
Periodically check the drain hose for any blockages or kinks. Ensure the condensate pump is functioning correctly by observing water flow during operation. The 'Purge' button on the control panel can be used to manually activate the pump and clear any residual water.
6. പ്രശ്നപരിഹാരം
If the unit is not operating correctly, refer to the following common issues before contacting support.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| യൂണിറ്റ് ഓണാക്കുന്നില്ല | No power, power cord disconnected, circuit breaker tripped. | പവർ കണക്ഷൻ പരിശോധിക്കുക, ഔട്ട്ലെറ്റ് പ്രവർത്തനക്ഷമമാണെന്ന് ഉറപ്പാക്കുക, സർക്യൂട്ട് ബ്രേക്കർ പുനഃസജ്ജമാക്കുക. |
| ഈർപ്പം കുറയ്ക്കൽ ഇല്ല | Humidity setting too high, filter clogged, room temperature too low. | Lower humidity setpoint, clean/replace filter, ensure room temperature is within operating range (35.6°F - 102.2°F). |
| വെള്ളം ചോർച്ച | Drain hose kinked or clogged, drain connection loose. | Inspect and clear drain hose, ensure secure connection. |
| യൂണിറ്റ് ശബ്ദമയമാണ് | യൂണിറ്റ് നിരപ്പായ പ്രതലത്തിലല്ല, ഫാൻ തടസ്സം. | Place unit on a level surface, check for and remove any obstructions. |
| ഡിസ്പ്ലേയിൽ പിശക് കോഡ് | Internal malfunction detected. | Refer to the full user manual for specific error code definitions or contact customer support. |
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് | അലോറൈർ |
| മോഡലിൻ്റെ പേര് | Storm 80X |
| ഈർപ്പം കുറയ്ക്കാനുള്ള ശേഷി (സാച്ചുറേഷൻ) | പ്രതിദിനം 170 പൈന്റ്സ് |
| ഈർപ്പം നീക്കം ചെയ്യുന്നതിനുള്ള ശേഷി (AHAM) | 80 പിപിഡി |
| കവറേജ് ഏരിയ | 2,100 ചതുരശ്ര അടി വരെ |
| എയർ ഫ്ലോ കപ്പാസിറ്റി | മിനിറ്റിന് 200 ക്യുബിക് അടി (CFM) |
| പ്രവർത്തന താപനില പരിധി | 35.6°F - 102.2°F |
| പ്രവർത്തന ഹ്യുമിഡിറ്റി റേഞ്ച് | 25% - 80% ആർഎച്ച് |
| വൈദ്യുതി ഉപഭോഗം | 607 വാട്ട്സ് |
| ഉൽപ്പന്ന അളവുകൾ (L×W×H) | 15.2"D x 14.4"W x 24.8"H |
| ഇനത്തിൻ്റെ ഭാരം | 63.9 പൗണ്ട് |
| ഹോസ് നീളം കളയുക | 19.6 അടി |
| Drain Vertical Height | 19.6 അടി |
| ഫിൽട്ടർ തരം | MERV-1 |
| സർട്ടിഫിക്കേഷനുകൾ | ETL ലിസ്റ്റുചെയ്തിരിക്കുന്നു |
8. വാറൻ്റിയും പിന്തുണയും
ALORAIR provides a comprehensive warranty for the Storm 80X dehumidifier:
- 6-Month Parts and Labor: മാറ്റിസ്ഥാപിക്കൽ ഭാഗങ്ങൾക്കോ യൂണിറ്റിനോ ഉള്ള ഷിപ്പ്മെന്റ് ചാർജുകൾ ഉൾപ്പെടുന്നു.
- 1-Year Parts and Labor: തകരാറുള്ള ഉൽപ്പന്നം നന്നാക്കുന്നതിനോ മാറ്റിസ്ഥാപിക്കുന്നതിനോ വേണ്ടി തിരികെ അയയ്ക്കുന്നതിനുള്ള ഷിപ്പ്മെന്റ് ചാർജുകൾ ഒഴിവാക്കുന്നു.
- 3-Year Parts and Labor: Coverage for the refrigeration system only.
- 5-Year Compressor and Coil: പരിമിതമായ വാറന്റി.
For additional warranty information or technical support, please refer to the full product user manual or contact ALORAIR customer service.





