GLEDOPTO ZigBee Pro+ 5-in-1 സ്മാർട്ട് LED കൺട്രോളർ (മോഡൽ GL-C-204P) ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GLEDOPTO ZigBee Pro+ 5-in-1 Smart LED Controller, Model GL-C-204P. This device is designed to control various types of LED strip lights within a smart home environment, supporting multiple configurations including RGBCCT, RGBW, RGB, CCT, and Dimmer modes. It operates with a DC 12-48V input and offers a maximum total output of 15A.

2 സുരക്ഷാ വിവരങ്ങൾ

• വാല്യംtagഇ അനുയോജ്യത: ഇൻപുട്ട് വോളിയം ഉറപ്പാക്കുകtage (DC 12-48V) and current of your power supply and LED strips are compatible with the controller's specifications. Exceeding the maximum total output current of 15A or 12A per channel can damage the device and connected lighting.
• ശരിയായ വയറിംഗ്: Always ensure good contact between the wire and the terminal. Incorrect or loose wiring can lead to overheating or malfunction.
• പ്രവർത്തന പരിസ്ഥിതി: The controller is designed for indoor use within an operating temperature range of -20°C to +45°C. Avoid exposure to extreme temperatures, moisture, or corrosive environments.
• ഹബ് അനുയോജ്യത: Please note that Tuya Zigbee hubs currently block third-party devices. This GLEDOPTO Zigbee product may not connect to Tuya hubs. Verify compatibility with your specific Zigbee hub before purchase and installation.
• പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: If you are unsure about any wiring procedures, consult a qualified electrician.

3. പാക്കേജ് ഉള്ളടക്കം

• 1 x GLEDOPTO ZigBee Pro+ LED Strip Controller (Model GL-C-204P)

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

The GLEDOPTO ZigBee Pro+ controller offers versatile control for various LED strip types. Its compact design integrates essential functions for smart lighting systems.

ചിത്രം 4.1: മുൻഭാഗം view of the GLEDOPTO ZigBee Pro+ 5-in-1 Smart LED Controller.

പ്രധാന സവിശേഷതകൾ:

• High Output Current: Total output current of 15A maximum, with a maximum of 12A per single channel, allowing for longer LED strip installations (e.g., 10-15 meters).
• വൈഡ് വോളിയംtagഇ ശ്രേണി: Supports DC 12-48V input, compatible with a broad range of LED strips and panel lights.
• 5-ഇൻ-1 പ്രവർത്തനം: Configurable for RGBCCT, RGBW, RGB, CCT, or Dimmer LED strip types.
• Power-on Status Memory: Retains the last power-on state (on/off) or defaults to 'on' after a power interruption.
• Selectable PWM Frequency: Offers frequencies of 600Hz, 800Hz, 1000Hz, 2000Hz, 4000Hz, and 8000Hz to match various power supplies and reduce potential noise. Default frequency is 1000Hz.

ചിത്രം 4.2: വിശദമായത് view of the controller highlighting its 15A maximum output, support for external push button switches, and quick wire connectors for easy wiring.

ഘടകങ്ങൾ:

Image 4.3: Diagram illustrating the key functions and components of the controller.

1. റീസെറ്റ് ബട്ടൺ: Used for switching PWM frequency (short press) or resetting the controller (long press for 5 seconds).
2. OPT Button: Used for switching the current device function/mode (short press) or setting power-on status (long press for 5 seconds).
3. Push Button Terminal: Connects to an external push button for power on/off (short press) and brightness adjustment (long press).
4. ഇൻഡിക്കേറ്റർ ലൈറ്റ്: Displays different colors corresponding to the selected function mode.

5. സജ്ജീകരണം

5.1 വയറിംഗ് നിർദ്ദേശങ്ങൾ

The controller features quick-connect terminals for simplified wiring. Follow these steps for secure connections:

1. വയറുകൾ തയ്യാറാക്കുക: Strip approximately 10mm of insulation from the ends of your LED strip wires and power supply wires. The suggested wire type is 0.3-2mm² (22-14AWG).
2. കണക്റ്റർ തുറക്കുക: Gently open the connector lever upwards.
3. വയർ ചേർക്കുക: Insert the prepared wire into the appropriate terminal. Refer to the terminal labels for correct polarity and channel assignment (V+, R, G, B, W, C, V-).
4. സുരക്ഷിത കണക്ഷൻ: Press the connector lever down to secure the wire. Give each wire a gentle tug to ensure it is firmly held.

Image 5.1: Step-by-step guide for using the quick connect port design for wiring.

5.2 ഒരു സിഗ്ബീ ഹബ്ബുമായി ജോടിയാക്കൽ

This controller requires a compatible ZigBee hub for smart control. The pairing process typically involves:

1. പവർ ഓൺ: Connect the controller to a suitable DC 12-48V power supply.
2. ജോടിയാക്കൽ മോഡ് ആരംഭിക്കുക: Consult your ZigBee hub's instructions to put it into pairing mode.
3. കൺട്രോളർ പുനഃസജ്ജമാക്കുക: Short press the 'Reset' button on the controller or power cycle the controller (turn off and on) to initiate pairing. The indicator light may flash to confirm pairing mode.
4. ജോടിയാക്കൽ സ്ഥിരീകരിക്കുക: Once successfully paired, the controller will appear in your ZigBee hub's device list.

Important Note: If you change the device function mode using the 'OPT' button, the controller may need to be re-paired with your ZigBee hub.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1 Mode Selection (5-in-1 Functionality)

The controller supports five different LED strip configurations. Use the 'OPT' button to cycle through these modes:

• Short Press 'OPT': Switches the current device function. The indicator light will change color to reflect the selected mode:

Image 6.1: Visual representation of the 5-in-1 modes supported by the controller.

6.2 Power-on Status Settings

You can configure the controller's behavior after a power interruption:

• Long Press 'OPT' (more than 5 seconds): The indicator light will flash light blue three times. This action toggles between two power-on states:

1. അവസാന അവസ്ഥ ഓർമ്മിക്കുക: The controller will resume its state (on/off) prior to the power failure.
2. Lights Up by Default: The controller will turn on automatically when power is restored.

Image 6.2: Illustration of the two optional power-on state settings.

6.3 Selectable PWM Frequency

Adjusting the PWM frequency can help match different power supplies and reduce audible noise (e.g., high-pitched whine) from the LED strips or power supply.

• Short Press 'Reset': Cycles through the available frequencies. The number of flashes of the indicator light corresponds to the selected frequency:

Image 6.3: Diagram illustrating the selectable PWM frequencies and their corresponding indicator light flashes.

6.4 External Push Button Control

An external push button can be connected to the 'Push' terminals for basic control:

• ഷോർട്ട് പ്രസ്സ്: Toggles power On/Off.
• ലോംഗ് പ്രസ്സ്: Adjusts brightness. Release and long press again to change dimming direction (increases brightness, then decreases brightness).

7. പരിപാലനം

• വൃത്തിയാക്കൽ: Use a dry, soft cloth to clean the controller. Do not use harsh chemicals or abrasive cleaners.
• പരിസ്ഥിതി: Keep the controller in a dry, well-ventilated area, away from direct sunlight and sources of heat or moisture.
• കണക്ഷനുകൾ: Periodically check all wire connections to ensure they remain secure.

8. പ്രശ്‌നപരിഹാരം

• കൺട്രോളർ പ്രതികരിക്കുന്നില്ല:
  • Ensure the power supply is connected and providing the correct voltage (DC 12-48V).
  • എല്ലാ വയറിംഗ് കണക്ഷനുകളും അയഞ്ഞതാണോ അതോ തെറ്റായ പോളാരിറ്റിയാണോ എന്ന് പരിശോധിക്കുക.
  • Try power cycling the controller (disconnect and reconnect power).
  • If using a ZigBee hub, ensure the controller is properly paired. Re-pair if necessary.
• LED Strips Not Lighting Up or Flickering:
  • Verify that the LED strip type matches the mode selected on the controller (RGBCCT, RGBW, RGB, CCT, Dimmer).
  • Check the LED strip itself for damage or incorrect wiring.
  • Ensure the total current draw of the LED strips does not exceed the controller's maximum output (15A total, 12A per channel).
  • If flickering occurs, try adjusting the PWM frequency using the 'Reset' button.
• High-Pitched Noise:
  • This can often be resolved by changing the PWM frequency. Short press the 'Reset' button to cycle through frequencies (600Hz, 800Hz, 1000Hz, 2000Hz, 4000Hz, 8000Hz) until the noise is eliminated or reduced.
• കൺട്രോളർ അമിത ചൂടാക്കൽ:
  • ഉടൻ വൈദ്യുതി ബന്ധം വിച്ഛേദിക്കുക.
  • Check if the total current draw of the connected LED strips exceeds the controller's maximum capacity (15A total).
  • Ensure adequate ventilation around the controller.
  • Verify that all wire connections are secure and not causing resistance.
• Cannot Connect to Tuya Hub:
  • As stated in the safety information, Tuya Zigbee hubs may block third-party devices. This is a known compatibility issue. Consider using a different Zigbee hub (e.g., Home Assistant, Conbee) for full functionality.

9 സ്പെസിഫിക്കേഷനുകൾ

Image 9.1: Detailed product parameters for the GLEDOPTO ZigBee Pro+ LED Controller.

10. വാറൻ്റിയും പിന്തുണയും

GLEDOPTO products are designed for reliability and performance. For warranty information and technical support, please refer to the official GLEDOPTO webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.