Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit User Manual

1. ആമുഖം

This manual provides essential information for the safe and efficient use of your Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit (PSU). The Rebel P10 is designed to deliver reliable and efficient power to your personal computer, supporting the latest ATX 3.1 standard for compatibility with modern graphics cards. It features a quiet 120mm fan with a fluid dynamic bearing and flat cables to optimize airflow within your PC case.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety instructions before installing or operating the PSU. Failure to do so may result in personal injury or damage to your equipment.

• വൈദ്യുത അപകടം: The PSU contains high voltage components. Do not open the PSU casing. ഉള്ളിൽ ഉപയോക്തൃ-സേവനയോഗ്യമായ ഭാഗങ്ങളൊന്നുമില്ല.
• പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: Installation should be performed by a qualified technician or experienced user.
• വെൻ്റിലേഷൻ: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• പരിസ്ഥിതി: Operate the PSU in a dry, well-ventilated environment, away from moisture, dust, and extreme temperatures.
• ഗ്രൗണ്ടിംഗ്: Always connect the PSU to a grounded power outlet using the provided power cable.
• പവർ ഓഫ്: Always disconnect the PSU from the mains power before performing any installation, maintenance, or troubleshooting.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit
• എസി പവർ കേബിൾ
• മൗണ്ടിംഗ് സ്ക്രൂകൾ
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to install your Sharkoon Rebel P10 PSU into your computer system:

1. നിങ്ങളുടെ സിസ്റ്റം തയ്യാറാക്കുക: Ensure your computer is completely powered off and disconnected from the wall outlet. Open your PC case to access the PSU mounting area.
2. പഴയ പൊതുമേഖലാ സ്ഥാപനം നീക്കം ചെയ്യുക (ബാധകമെങ്കിൽ): Disconnect all cables from your old PSU and remove it from the case.
3. Mount the New PSU: Carefully place the Sharkoon Rebel P10 into the designated PSU bay in your PC case. Secure it with the provided mounting screws. Ensure the fan faces the correct direction for optimal airflow (typically facing downwards if your case has a bottom vent, or inwards if it's a top-mounted PSU).
   

   ചിത്രം: പ്രധാനം view of the Sharkoon Rebel P10 850W Power Supply Unit. This image shows the primary casing and fan grill, illustrating the unit's compact design for easy installation into a PC chassis.
4. മദർബോർഡ് പവർ ബന്ധിപ്പിക്കുക: Connect the 24-pin ATX power connector to your motherboard's 24-pin socket. Ensure it clicks securely into place.
5. സിപിയു പവർ ബന്ധിപ്പിക്കുക: Connect the 4+4-pin EPS/ATX12V connector(s) to your motherboard's CPU power socket(s).
6. PCIe പവർ ബന്ധിപ്പിക്കുക: For graphics cards, connect the appropriate PCIe power connectors (e.g., 6+2-pin) to your graphics card(s). The Rebel P10 supports ATX 3.1, ensuring compatibility with the latest generation of power-hungry GPUs.
   

   Image: A selection of flat cables included with the Sharkoon Rebel P10 850W Power Supply Unit. These flat cables are designed for improved cable management and better airflow within the computer case.

7. Connect Peripheral Power: Connect SATA power connectors to your SSDs, HDDs, and optical drives. Use Molex connectors for any other compatible peripherals. The flat cable design of the Rebel P10 aids in efficient cable routing and improved airflow.
8. കേബിൾ മാനേജുമെന്റ്: Organize cables neatly to ensure proper airflow and a tidy build.
9. കേസ് അടച്ച് എസി പവർ ബന്ധിപ്പിക്കുക: Close your PC case. Connect the AC power cable to the PSU's power inlet and then to a grounded wall outlet. Ensure the power switch on the PSU is in the 'OFF' position before connecting to the wall outlet.
   

   ചിത്രം: പിൻഭാഗം view of the Sharkoon Rebel P10 850W Power Supply Unit, showing the AC power input and the main power switch. This switch controls the power flow to the unit.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the PSU is installed and all connections are secure:

1. പവർ ഓൺ: Flip the power switch on the back of the PSU to the 'ON' position.
2. സിസ്റ്റം ആരംഭം: നിങ്ങളുടെ സിസ്റ്റം ആരംഭിക്കാൻ കമ്പ്യൂട്ടർ കേസിലെ പവർ ബട്ടൺ അമർത്തുക.
3. ശാന്തമായ പ്രവർത്തനം: The Rebel P10 features a 120mm fan with a fluid dynamic bearing, designed for quiet operation even under load.

6. പരിപാലനം

Regular maintenance helps ensure the longevity and optimal performance of your PSU:

• പൊടി നീക്കം: Periodically clean dust from the PSU's fan and ventilation grilles using compressed air. Ensure the system is powered off and unplugged before cleaning.
• കേബിൾ പരിശോധന: Occasionally check that all power cables are securely connected and not obstructing airflow.
• സ്റ്റേബിൾ വോളിയംtage: The Rebel P10 utilizes DC/DC technology for optimal and accurate voltage regulation, contributing to system stability.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your PSU, consider the following:

• ശക്തിയില്ല:
  • Ensure the AC power cable is securely connected to both the PSU and the wall outlet.
  • Verify the power switch on the back of the PSU is in the 'ON' position.
  • Check the wall outlet by plugging in another device.
  • Ensure all internal power connectors (24-pin, CPU, PCIe) are firmly seated.
• സിസ്റ്റം അസ്ഥിരത/ക്രാഷുകൾ:
  • നിങ്ങളുടെ സിസ്റ്റത്തിന്റെ വൈദ്യുതി ആവശ്യകതകൾ പൊതുമേഖലാ സ്ഥാപനത്തിന്റെ 850W ശേഷിയിൽ കവിയുന്നില്ലെന്ന് ഉറപ്പാക്കുക.
  • Verify all components are correctly installed and receiving power.
  • The Rebel P10 includes comprehensive protection features (e.g., overcurrent, overload protection) to prevent damage in case of anomalies. If the PSU shuts down unexpectedly, it might be due to one of these protections activating.
• അസാധാരണമായ ശബ്ദം:
  • Check for any cables or obstructions interfering with the PSU fan.
  • Ensure the PSU is securely mounted to prevent vibrations.

If problems persist, consult a qualified technician or contact Sharkoon support.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

Sharkoon products are manufactured to high quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon webസൈറ്റ്.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Sharkoon support page or contact their customer service department. Contact information can typically be found on the manufacturer's webസൈറ്റ്:

www.sharkoon.com