ഭ്രമണപഥം 67100

Orbit 67100 1/4" Barb Drip Irrigation Multi-Stream Emitter Instruction Manual

മോഡൽ: 67100

ആമുഖം

The Orbit 67100 Multi-Stream Drip Emitter is designed for precise micro-watering in various garden settings. It delivers a gentle, full-pattern multi-stream spray, ideal for annuals, shrubs, perennials, or container plants. This emitter allows for adjustable water flow to suit specific plant needs and conserve water.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The multi-stream drip emitter features a 1/4-inch barb inlet for direct connection to 1/4-inch drip tubing. It also includes a 10-32 male thread (MT) for optional connection to drip stakes. The emitter's head is adjustable, allowing users to control the spray radius and flow rate.

Orbit 67100 Multi-Stream Drip Emitter

Image: The Orbit 67100 Multi-Stream Drip Emitter, a black plastic component with a ribbed top and a barb connection at the bottom. The top surface shows markings for flow adjustment.

പ്രധാന സവിശേഷതകൾ:

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

  1. Prepare Tubing: Ensure your 1/4-inch drip tubing is cut to the desired length and free of debris.
  2. Connect to Tubing: Push the 1/4-inch barb inlet of the emitter directly into the end of the 1/4-inch drip tubing. For easier insertion, you may briefly warm the end of the tubing in warm water.
  3. Optional Drip Stake Connection: If using a drip stake, connect the 10-32 male thread of the emitter to a drip stake with a 10-32 female thread.
  4. പ്ലേസ്മെൻ്റ്: Position the emitter near the base of the plant you wish to water. Use a drip tubing Y-anchor stake if needed to secure the emitter in place.
  5. Water Source Connection: Connect the 1/4-inch drip tubing to your main drip manifold, a 1/2-inch drip tubing lateral line, or directly to a hose faucet using a 1/4-inch hose faucet adapter.
  6. സിസ്റ്റം പരിശോധന: Before final operation, briefly turn on the water supply to check for leaks and proper emitter function.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Orbit 67100 Multi-Stream Drip Emitter allows for easy adjustment of water flow and spray radius.

ജലപ്രവാഹം ക്രമീകരിക്കൽ:

The top of the emitter features a rotating head with markings for adjustment. To decrease the spray radius and water flow, rotate the multi-stream head clockwise towards the "minus" symbol. To increase the spray radius and water flow, rotate the head counter-clockwise towards the "plus" symbol. You can also shut off the flow completely by rotating it fully clockwise.

The recommended operating pressure for this emitter is 30 PSI. For optimal water conservation, consider integrating the system with an Orbit B-hyve smart controller.

മെയിൻ്റനൻസ്

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ജലപ്രവാഹമില്ല അല്ലെങ്കിൽ ഒഴുക്ക് കുറഞ്ഞുClogged emitter; insufficient water pressure; emitter turned off.Clean the emitter; check water supply pressure; rotate emitter head to increase flow.
Leaking at connection pointImproperly seated tubing; damaged barb.Ensure tubing is fully pushed onto the barb; replace emitter if barb is damaged.
അസമമായ സ്പ്രേ പാറ്റേൺPartial clog; incorrect adjustment.Clean the emitter nozzles; adjust the emitter head for desired pattern.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the official Orbit webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: ദയവായി സന്ദർശിക്കുക Orbit Store on Amazon or the official Orbit webഏറ്റവും പുതിയ പിന്തുണ വിശദാംശങ്ങൾക്കായുള്ള സൈറ്റ്.

അനുബന്ധ രേഖകൾ - 67100

പ്രീview Orbit Garden Watering Guide: Soaker Hose and Drip Systems
A comprehensive guide from Orbit on using soaker hose and drip watering systems for efficient garden irrigation. Learn about system setup, component descriptions, installation steps, and helpful tips for water conservation and maintaining healthy plants.
പ്രീview Orbit DripMaster Installation Guide for Micro-Irrigation Systems
Comprehensive installation guide for the Orbit DripMaster micro-irrigation system. Learn how to set up efficient watering for gardens, plants, trees, and shrubs, saving water and time.
പ്രീview ഓർബിറ്റ് ഹോസ് എൻഡ് വാട്ടറിംഗ് ഫ്ലവർബെഡ് ആൻഡ് ഷ്രബ് കിറ്റ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ
ഈ സമഗ്രമായ നിർദ്ദേശ മാനുവൽ ഉപയോഗിച്ച് നിങ്ങളുടെ ഓർബിറ്റ് ഹോസ് എൻഡ് വാട്ടറിംഗ് ഫ്ലവർബെഡും ഷ്രബ് കിറ്റും എങ്ങനെ ഇൻസ്റ്റാൾ ചെയ്യാമെന്ന് മനസിലാക്കുക. ഘട്ടം ഘട്ടമായുള്ള മാർഗ്ഗനിർദ്ദേശവും ലേഔട്ടും ഉൾപ്പെടുന്നു.ampകാര്യക്ഷമമായ തോട്ടം ജലസേചനത്തിനായി ലെസ്.
പ്രീview Orbit 27752-24 Automatic Watering System Owner's Manual
This manual provides instructions for the Orbit 27752-24 Automatic Watering System, covering installation, programming, manual watering, and troubleshooting.
പ്രീview Orbit Expandable Watering Timer: Installation and Programming Guide
Detailed installation and programming guide for the Orbit Expandable Watering Timer. Covers setup, features like Rain Delay and Manual Watering, troubleshooting tips, and technical specifications for optimal garden irrigation.
പ്രീview Orbit 1 Outlet Simple Watering Timer: User Guide and Programming Instructions
A comprehensive guide to programming and using the Orbit 1 Outlet Simple Watering Timer, including features, installation, troubleshooting, and important warnings.