1. ആമുഖം
The INKBIRDPLUS Split-Type Temperature Controller (Model JK-TC810) is a versatile digital thermostat designed for precise temperature management. It features a split design with a separate display unit and power outlet, offering flexible installation and ease of use. This controller supports both heating and cooling modes, periodic timing control, and includes high/low temperature alarms. It is suitable for a wide range of applications, including greenhouses, reptile habitats, incubators, refrigeration units, and home brewing.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
The INKBIRDPLUS JK-TC810 consists of a main control unit with an LCD display and a separate power outlet unit, connected by a 2.7-meter control cable. A temperature probe is also included for accurate measurement.
Image: The INKBIRDPLUS Split-Type Temperature Controller, showing the main display unit, the UK plug power outlet, and the temperature probe.
പ്രധാന സവിശേഷതകൾ:
- Split-Type Design: Separate display and outlet for flexible placement.
- Heating/Cooling Modes: Automatically switches between modes based on set temperatures.
- 4 ടൈമർ മോഡുകൾ: Cycle timer, countdown ON, countdown OFF, and countdown ON/OFF.
- ബാക്ക്ലിറ്റ് എൽസിഡി സ്ക്രീൻ: Clear visibility of parameters in various lighting conditions.
- താപനില കാലിബ്രേഷൻ: Allows for fine-tuning of temperature readings.
- മെമ്മറി പ്രവർത്തനം: Retains settings after power loss.
- വിശാലമായ താപനില പരിധി: Operates from -40°C to 120°C (-40°F to 248°F).
Image: An illustration detailing the main features of the controller, including split-type design, heating/cooling, periodic timing, temperature calibration, backup memory, and backlit LCD screen.
3. സജ്ജീകരണം
- അൺപാക്ക്: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
- കണക്ട് പ്രോബ്: Insert the temperature probe into the designated port on the main control unit.
- പൊസിഷൻ പ്രോബ്: Place the temperature probe in the environment where temperature needs to be monitored and controlled. Ensure it is not directly exposed to heating or cooling elements to get an accurate reading.
- പ്ലഗ് ഇൻ: Connect the power outlet unit to a standard UK electrical socket. The main control unit will power on and display the current temperature.
- ഉപകരണം ബന്ധിപ്പിക്കുക: Plug your heating or cooling appliance (e.g., heater, fan, incubator) into the power outlet unit of the controller.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
4.1 അടിസ്ഥാന താപനില നിയന്ത്രണം
The controller operates in two main modes: Heating and Cooling. The mode is determined by the relationship between the Start Temperature (ON) and Stop Temperature (OFF).
- ചൂടാക്കൽ മോഡ്: When Start Temp < Stop Temp. The appliance will turn ON when the measured temperature drops below the Start Temp and turn OFF when it reaches the Stop Temp.
- കൂളിംഗ് മോഡ്: When Start Temp > Stop Temp. The appliance will turn ON when the measured temperature rises above the Start Temp and turn OFF when it drops to the Stop Temp.
Image: Visual representation of the controller used in both heating (e.g., with a space heater) and cooling (e.g., with an air conditioner) scenarios, demonstrating its versatility.
4.2 Setting Temperatures
- അമർത്തുക സെറ്റ് button once. The Start Temperature (ON) will flash.
- ഉപയോഗിക്കുക UP/CLK ഒപ്പം താഴേക്ക് buttons to adjust the desired Start Temperature.
- അമർത്തുക സെറ്റ് button again. The Stop Temperature (OFF) will flash.
- ഉപയോഗിക്കുക UP/CLK ഒപ്പം താഴേക്ക് buttons to adjust the desired Stop Temperature.
- അമർത്തുക സെറ്റ് button a third time to confirm and exit the setting mode, or wait a few seconds for it to auto-save.
4.3 Timing Modes
The controller offers four timing modes for advanced control. Press the മോഡ് button repeatedly to cycle through these options (F01, F02, F03, F04).
Image: Display examples of the four timing modes (F01 Cycle Timer, F02 CD ON, F03 CD OFF, F04 CD ON, CD OFF) on the controller's LCD screen.
- F01: Cycle Timer (ON/OFF Cycle): Set an ON duration and an OFF duration for the appliance to cycle repeatedly.
- F02: Countdown ON: Set a countdown time after which the appliance will turn ON and stay ON.
- F03: Countdown OFF: Set a countdown time after which the appliance will turn OFF and stay OFF.
- F04: Countdown ON, Countdown OFF: Set a countdown for the appliance to turn ON, and then another countdown for it to turn OFF.
To set the times for each mode, select the desired mode using the മോഡ് ബട്ടൺ, തുടർന്ന് അമർത്തുക സെറ്റ് ഉപയോഗിക്കുകയും ചെയ്യുക UP/CLK ഒപ്പം താഴേക്ക് to adjust the hours and minutes.
4.4 താപനില കാലിബ്രേഷൻ
If the measured temperature deviates from a known accurate thermometer, you can calibrate the controller:
- With the device powered on, press and hold the സെറ്റ് button for approximately 3 seconds to enter the advanced settings menu.
- ഉപയോഗിക്കുക UP/CLK or താഴേക്ക് to navigate to the temperature calibration setting (refer to the on-screen indicator or specific symbol in the full manual).
- അമർത്തുക സെറ്റ് തിരഞ്ഞെടുക്കാൻ, തുടർന്ന് ഉപയോഗിക്കുക UP/CLK or താഴേക്ക് to adjust the calibration value. A positive value increases the displayed temperature, a negative value decreases it.
- അമർത്തുക സെറ്റ് to confirm and exit, or wait for auto-save.
4.5 ബാക്ക്ലൈറ്റ് ക്രമീകരണങ്ങൾ
The backlight duration can be adjusted for energy saving or continuous visibility. Access this setting through the advanced settings menu (press and hold സെറ്റ് for 3 seconds) and adjust the backlight timer as needed.
5. പരിപാലനം
- വൃത്തിയാക്കൽ: Wipe the controller and probe with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.
- പ്രോബ് കെയർ: Ensure the temperature probe is clean and free from debris for accurate readings. Avoid bending or damaging the probe cable.
- സംഭരണം: When not in use, store the controller in a dry, cool place away from direct sunlight and extreme temperatures.
6. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| കൺട്രോളർ പവർ ഓണാക്കുന്നില്ല | No power to the outlet; faulty unit | Check the power socket; ensure the unit is properly plugged in. If issues persist, contact support. |
| കൃത്യമല്ലാത്ത താപനില വായന | Probe dirty or damaged; calibration needed; probe placed incorrectly | Clean the probe; perform temperature calibration (Section 4.4); reposition the probe away from direct heat/cold sources. |
| Appliance not turning ON/OFF as expected | Incorrect Start/Stop temperature settings; wrong mode (heating/cooling); appliance not plugged in or faulty | Verify Start and Stop temperature settings (Section 4.2); ensure the appliance is functional and correctly plugged into the controller's outlet. |
| Timing function not working | Incorrect timing mode selected or parameters set incorrectly | Review and adjust timing mode settings (Section 4.3). |
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | JK-TC810 |
| താപനില നിയന്ത്രണ പരിധി | -40°C മുതൽ 120°C വരെ (-40°F മുതൽ 248°F വരെ) |
| പ്ലഗ് തരം | യുകെ പ്ലഗ് |
| ഇനത്തിൻ്റെ ഭാരം | 256 ഗ്രാം |
| ഉൽപ്പന്ന അളവുകൾ | 15.5D x 8W x 8H സെന്റീമീറ്ററുകൾ |
| കേബിളിന്റെ നീളം നിയന്ത്രിക്കുക | 2.7 മീറ്റർ (ഏകദേശം) |
| പ്രദർശിപ്പിക്കുക | ബാക്ക്ലിറ്റ് എൽസിഡി |
8. വാറൻ്റിയും പിന്തുണയും
INKBIRDPLUS products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact INKBIRDPLUS customer service through their official webനിങ്ങൾ ഉൽപ്പന്നം വാങ്ങിയ സൈറ്റ് അല്ലെങ്കിൽ റീട്ടെയിലർ. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
9. അപേക്ഷകൾ
The INKBIRDPLUS Split-Type Temperature Controller is suitable for a wide array of temperature-sensitive environments:
Image: A collage illustrating diverse applications for the temperature controller, such as home brewing, refrigeration, aquariums, reptile enclosures, e-bike charging, incubation, and general home temperature control.
- Home Brewing & Fermentation: Maintain precise temperatures for yeast activity.
- റഫ്രിജറേഷൻ: Control cooling units for specific storage needs.
- അക്വേറിയങ്ങൾ: Regulate water temperature for aquatic life.
- Reptile Habitats: Create optimal thermal environments for reptiles.
- ഇൻകുബേഷൻ: Ensure stable temperatures for egg hatching or cultures.
- ഹരിതഗൃഹങ്ങൾ: Manage climate for plant growth.
- പൊതുവായ വീട്ടുപയോഗം: Control various heating or cooling devices.
