1. ആമുഖം
The ESX DRDS14 is a 4-channel smart remote switch designed to optimize the turn-on and turn-off sequence of car audio amplifiers and other components. It effectively eliminates the common 'PLOPP' noise often heard from speakers or subwoofers when amplifiers are activated or deactivated. This device provides variable turn-on and turn-off delays for up to four remote outputs, ensuring a smooth power transition and protecting your high-quality audio components. Additionally, it features a digital voltage indicator and integrated overvoltage/undervoltagഇ സംരക്ഷണം.
2 സുരക്ഷാ വിവരങ്ങൾ
Please read and understand all safety instructions before installing or operating the ESX DRDS14. Failure to follow these instructions may result in injury or damage to the device or vehicle.
- Always disconnect the vehicle's battery negative terminal before beginning any electrical installation to prevent short circuits.
- ഒപ്റ്റിമൽ പ്രകടനത്തിനും സുരക്ഷയ്ക്കും പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ ശുപാർശ ചെയ്യുന്നു.
- Ensure all wiring is correctly connected and insulated to prevent electrical hazards.
- ഉപകരണത്തെ ഈർപ്പം, വെള്ളം അല്ലെങ്കിൽ തീവ്രമായ താപനില എന്നിവയ്ക്ക് വിധേയമാക്കരുത്.
- Mount the device securely in a dry, well-ventilated area away from heat sources.
- Verify that the total current draw of connected remote devices does not exceed 500 mA per output.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview ഫീച്ചറുകളും
The ESX DRDS14 offers advanced control and protection for your car audio system.
പ്രധാന സവിശേഷതകൾ:
- 4-channel smart remote switch for sequential ampലൈഫയർ ആക്ടിവേഷൻ.
- Variable turn-on delays (0-30 seconds) for each output.
- Variable turn-off delays (0-30 seconds) for each output.
- ഡിജിറ്റൽ വോള്യംtage indicator, calibratable for accuracy.
- Automatic output shutdown in case of overvoltage അല്ലെങ്കിൽ undervoltage.
- Compact design with removable mounting feet.
- Connections: 1 remote input, 4 remote outputs (up to 500 mA/output).
ബോക്സിൽ എന്താണുള്ളത്:
- 1 x ESX DRDS14 Smart Remote Delay Switch
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps for proper installation of your ESX DRDS14.
4.1 ഫിസിക്കൽ ഇൻസ്റ്റലേഷൻ
Choose a suitable, dry location in your vehicle for mounting the DRDS14. The device features removable mounting feet for flexible installation. Secure the unit firmly to prevent movement.
4.2 വയറിംഗ് കണക്ഷനുകൾ
The DRDS14 has a terminal block for power and remote connections. Ensure all connections are secure and correctly polarized.
- GND: Connect to a solid chassis ground point in the vehicle.
- REM IN: Connect to the remote output of your head unit or DSP. This is the trigger signal for the DRDS14.
- + 12 വി: Connect to a constant +12V power source (fused, if not already).
- -1ട്ട്പുട്ടുകൾ 4-XNUMX: Connect these to the remote inputs of your amplifiers or other components. Each output can supply up to 500 mA.
ചിത്രം 1: മുകളിൽ നിന്ന് താഴേക്ക് view of the ESX DRDS14 showing the digital display, control buttons (A, B, C, D), and wiring terminals (GND, REM IN, +12V, and four remote outputs).
ചിത്രം 2: കോണാകൃതിയിലുള്ളത് view of the ESX DRDS14, highlighting the 'Turn-on' and 'Turn-off' indicator LEDs, the digital voltage display showing '13.9', and the four channel indicator LEDs (1, 2, 3, 4) below the display.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The DRDS14 allows for precise control over your system's power sequencing.
5.1 Setting Turn-on and Turn-off Delays
The four buttons labeled A, B, C, and D correspond to the four remote outputs. Each button allows individual programming of turn-on and turn-off delays from 0 to 30 seconds.
- To set Turn-on Delay: With the unit powered on, press and hold the desired channel button (A, B, C, or D) until the digital display shows 'ON' followed by a number. Use short presses of the same button to cycle through delay times (0-30 seconds). Release the button to save the setting.
- To set Turn-off Delay: With the unit powered on, press the desired channel button (A, B, C, or D) briefly. The display will show 'OFF' followed by a number. Use short presses of the same button to cycle through delay times (0-30 seconds). Release the button to save the setting.
- The 'Turn-on' and 'Turn-off' indicator LEDs will illuminate to show the current state of the remote input signal.
5.2 ഡിജിറ്റൽ വാല്യംtagഇ സൂചകം
The DRDS14 features a digital display that shows the current system voltage. This can be calibrated to match other voltage meters in your vehicle.
- കാലിബ്രേഷൻ: Refer to the detailed calibration procedure in the full user manual (not provided in this summary) or contact ESX support for instructions.
5.3 ഓവർവോൾtagഇ, അണ്ടർവോൾtagഇ സംരക്ഷണം
The DRDS14 includes a protection function that automatically shuts off connected components if the vehicle's voltage exceeds or falls below user-defined limits. This prevents damage to sensitive equipment.
- പരിധികൾ ക്രമീകരിക്കുക: ഓവർ വോൾtage ഒപ്പം undervoltage limits can be set individually. Consult the full user manual for the specific steps to configure these protection thresholds.
6. പരിപാലനം
The ESX DRDS14 requires minimal maintenance.
- ഉപകരണം വൃത്തിയായും പൊടിയും അവശിഷ്ടങ്ങളും ഇല്ലാതെ സൂക്ഷിക്കുക. വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക.
- കഠിനമായ രാസവസ്തുക്കളോ ലായകങ്ങളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
- Ensure all wiring connections remain tight and free from corrosion.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your ESX DRDS14, refer to the following common problems and solutions.
- No Power to DRDS14:
- Check the +12V and GND connections for proper contact and polarity.
- Ensure the remote input (REM IN) from your head unit/DSP is active.
- Verify any inline fuses are intact.
- Amplifiers Not Turning On/Off Correctly:
- Check the remote output connections from the DRDS14 to the ampജീവപര്യന്തം.
- Verify the turn-on and turn-off delay settings for each channel (A, B, C, D).
- Ensure the total current draw of connected devices does not exceed 500 mA per output.
- 'PLOPP' Noise Still Present:
- Adjust the turn-on and turn-off delays to ensure proper sequencing. Experiment with different delay times.
- Ensure all ground connections in your audio system are solid and free from interference.
- Digital Display Shows Error or Incorrect Voltage:
- Check the +12V and GND connections.
- വോളിയം നടത്തുകtage calibration if necessary (refer to the full manual).
- ഓവർവോൾ ആണെങ്കിൽtage/undervoltage protection is active, check the vehicle's battery voltage.
If problems persist, contact your ESX dealer or technical support.
8 സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ് | ESX |
| മോഡൽ | DRDS14 |
| ഇനം മോഡൽ നമ്പർ | DRDS14 |
| ഉൽപ്പന്ന അളവുകൾ | 5 x 7.3 x 2 സെ.മീ |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | 1 remote delay switch |
| ഇനങ്ങളുടെ എണ്ണം | 1 |
| ബാറ്ററികൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ട് | ഇല്ല |
| ബാറ്ററികൾ ആവശ്യമാണ് | ഇല്ല |
9. വാറൻ്റിയും പിന്തുണയും
For warranty information, please refer to the documentation provided with your purchase or contact your authorized ESX dealer. For technical support or further assistance, please visit the official ESX webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.
