OLIGHT ജാവലോട്ട് ടർബോ 2, I3T 2 ഫ്ലാഷ്‌ലൈറ്റ് ഉപയോക്തൃ മാനുവൽ

1. സജ്ജീകരണവും പ്രാരംഭ ഉപയോഗവും

1.1 ബാറ്ററി ഇൻസ്റ്റാളേഷനും ചാർജിംഗും

1. Unscrew Tail Cap: Rotate the tail cap counter-clockwise to open the battery compartment.
2. Insert Battery Pack: Insert the provided rechargeable battery pack with the positive (+) end facing towards the head of the flashlight.
3. Secure Tail Cap: Screw the tail cap back on clockwise until it is fully tightened.
4. പ്രാരംഭ ചാർജ്: Before first use, fully charge the flashlight. The Javelot Turbo 2 supports dual charging options:
   • കാന്തിക ചാർജിംഗ്: Attach the magnetic charging cable to the tail cap. The indicator light on the charger will show charging status.
   • USB-C ചാർജിംഗ്: Locate the hidden USB-C port by rotating the protective cover near the head of the flashlight. Insert a USB-C cable.

Image: The OLIGHT Javelot Turbo 2 demonstrating its hidden USB-C charging port and the magnetic charging method on the tail cap.

2. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

2.1 അടിസ്ഥാന പ്രവർത്തനം

• പവർ ഓൺ/ഓഫ്: ഫ്ലാഷ്‌ലൈറ്റ് ഓണാക്കാനോ ഓഫാക്കാനോ സൈഡ് സ്വിച്ച് ഒരിക്കൽ അമർത്തുക.
• Change Brightness Levels: When the flashlight is on, press and hold the side switch to cycle through brightness levels (Low, Medium, High). Release the switch to select the desired level.
• ടർബോ മോഡ്: Double-press the side switch quickly to activate Turbo mode (1800 lumens, 1500-meter throw). Double-press again to return to the previous mode.
• സ്ട്രോബ് മോഡ്: സ്ട്രോബ് മോഡ് സജീവമാക്കാൻ സൈഡ് സ്വിച്ച് വേഗത്തിൽ മൂന്ന് തവണ അമർത്തുക. പുറത്തുകടക്കാൻ ഒരു തവണ അമർത്തുക.
• ലോക്കൗട്ട്/അൺലോക്ക്: When the flashlight is off, press and hold the side switch for approximately two seconds until the light briefly flashes, indicating lockout mode. To unlock, press and hold the side switch for approximately two seconds until the light turns on at the lowest setting.

Image: A visual representation of the OLIGHT Javelot Turbo 2's powerful 1500-meter beam compared to a previous model, highlighting its long-range illumination capability.

2.2 വയർലെസ് വിദൂര നിയന്ത്രണം

The Javelot Turbo 2 includes a wireless remote for convenient operation from a distance of up to 8 meters.

• ജോടിയാക്കൽ: The remote is pre-paired with the flashlight. If re-pairing is needed, refer to the specific instructions provided with the remote.
• വിദൂര പ്രവർത്തനം:
  • Momentary On (Maximum Brightness): Press and hold the remote button.
  • Constant On (Maximum Brightness): Press the remote button once.
• Remote Charging: The remote charges via a magnetic dock located on the side of the flashlight. Ensure the remote is securely attached to the dock for charging.

Image: A hand holding the OLIGHT Javelot Turbo 2 wireless remote, demonstrating its use to control the flashlight from a distance.

Image: A close-up of the OLIGHT Javelot Turbo 2's magnetic dock, showing the remote being charged and held securely in place.

1. സജ്ജീകരണവും പ്രാരംഭ ഉപയോഗവും

1.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Unscrew Head: Rotate the head of the flashlight counter-clockwise to open the battery compartment.
2. ബാറ്ററി ചേർക്കുക: Insert one AAA battery (alkaline or rechargeable) with the positive (+) end facing towards the head of the flashlight.
3. Secure Head: Screw the head back on clockwise until it is fully tightened.

The I3T 2 is compatible with both standard AAA alkaline batteries and rechargeable AAA batteries. Using a rechargeable battery can boost the maximum output to 300 lumens.

Image: A person holding the OLIGHT I3T 2 flashlight, illustrating its use in a low-light environment and mentioning the option to use a rechargeable battery for increased output.

2. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

2.1 അടിസ്ഥാന പ്രവർത്തനം

• പവർ ഓൺ/ഓഫ്: Press the tail switch once to turn the flashlight on or off.
• Change Brightness Levels: When the flashlight is on, quickly turn it off and on again to cycle between Low and High modes. The flashlight can be initially powered on in your preferred low or high mode depending on your needs.
• മൊമെന്ററി ഓൺ: Half-press and hold the tail switch for momentary illumination. Release to turn off.

Image: The OLIGHT I3T 2 flashlight demonstrating its compact size and illustrating both high and low brightness modes in different scenarios.

Image: A graphic comparing the runtime of the OLIGHT I3T 2 (21 hours) with the previous I3T model (16 hours) using a 1.5V AAA alkaline battery, highlighting the extended battery life.

Image: A comparison showing the improved pocket clip design of the OLIGHT I3T 2, allowing for a more concealed and compact carry in a pocket compared to the I3T.