NICGIGA 5Gb Base-T Network Card User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The NICGIGA 5Gb Base-T Network Card, featuring the Realtek RTL8126 Controller, is designed to provide high-speed network connectivity for desktop computers, workstations, and servers. This PCIe Ethernet adapter supports speeds up to 5Gbps, ensuring stable internet access and efficient local data transmission. It is backward compatible with 2.5Gbps, 1Gbps, and 100Mbps connections and includes features like Wake-on-LAN (WOL) for remote system management. The card is compatible with various operating systems, including Windows 10, Windows 11, Windows Server, and Linux.

Figure 1.1: NICGIGA 5Gb Base-T Network Card with included brackets.

Figure 1.2: Key components of the NICGIGA 5Gb Network Card, highlighting the heat sink, Realtek RTL8126 chip, 5G RJ45 port, and gold-plated PCIe fingers.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

2.1 പ്രീ-ഇൻസ്റ്റലേഷൻ ചെക്ക്‌ലിസ്റ്റ്

Before beginning the installation, ensure you have the following:

• NICGIGA 5Gb Base-T Network Card (Model: NIC-5G)
• Standard or low-profile bracket (included)
• Small screwdriver and screws (typically included with the network card)
• An available PCIe x1, x4, x8, or x16 slot on your motherboard
• Compatible operating system: Windows 10/11, Windows Server, or Linux

2.2 ഹാർഡ്‌വെയർ ഇൻസ്റ്റലേഷൻ

Follow these steps to install the network card into your computer:

1. പവർ ഓഫാക്കി വിച്ഛേദിക്കുക: Completely shut down your computer and disconnect the power cable from the wall outlet.
2. കമ്പ്യൂട്ടർ കേസ് തുറക്കുക: മദർബോർഡിലേക്ക് പ്രവേശിക്കാൻ നിങ്ങളുടെ കമ്പ്യൂട്ടർ കേസിന്റെ സൈഡ് പാനൽ നീക്കം ചെയ്യുക.
3. Identify PCIe Slot: Locate an available PCIe x1, x4, x8, or x16 slot on your motherboard. Refer to your motherboard's manual for slot identification.
4. സ്ലോട്ട് കവർ നീക്കം ചെയ്യുക: Carefully remove the metal slot cover corresponding to the chosen PCIe slot on the back of your computer case.
5. Install Network Card: Align the network card with the PCIe slot and gently press it down firmly until it is securely seated. Ensure the gold-plated contacts are fully inserted into the slot.
6. സെക്യൂർ കാർഡ്: Use a screw to secure the network card's bracket to the computer case. If installing in a small form factor PC, replace the standard bracket with the included low-profile ഇൻസ്റ്റാളേഷന് മുമ്പുള്ള ബ്രാക്കറ്റ്.
7. കേസ് അടയ്ക്കുക: Replace the computer case side panel and reconnect the power cable.

Figure 2.1: Step-by-step hardware installation process.

Figure 2.2: The NICGIGA 5Gb Network Card is compatible with PCIe x1, x4, x8, and x16 slots.

2.3 ഡ്രൈവർ ഇൻസ്റ്റലേഷൻ

After physical installation, you may need to install or update the network card drivers for optimal performance. The card utilizes the Realtek RTL8126 controller.

• ഓട്ടോമാറ്റിക് ഇൻസ്റ്റലേഷൻ: In most modern operating systems (Windows 10/11, recent Linux distributions), the driver may be automatically detected and installed upon system startup.
• സ്വമേധയാലുള്ള ഇൻസ്റ്റാളേഷൻ: If the driver is not automatically installed or if you wish to ensure you have the latest version, it is recommended to download the official drivers directly from the Realtek webസൈറ്റ്. ഇതിനായി തിരയുക drivers compatible with the RTL8126 chipset.
• ഡ്രൈവർ അപ്‌ഡേറ്റ്: Regularly check for updated drivers from Realtek to ensure the best performance and stability.

Figure 2.3: The network card supports Windows 10, Windows 11, and Linux operating systems.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 നെറ്റ്‌വർക്ക് കണക്ഷൻ

Once the network card is installed and drivers are in place, connect an Ethernet cable from your router or network switch to the RJ45 port on the network card. The card will automatically negotiate the highest possible speed with your network device, supporting 5Gbps, 2.5Gbps, 1Gbps, or 100Mbps connections.

Figure 3.1: The network card supports various speeds, with a maximum of 5Gbps.

3.2 Wake-on-LAN (WOL) Functionality

The NICGIGA 5Gb Network Card supports Wake-on-LAN (WOL), allowing you to remotely power on your computer over the network. This feature is beneficial for centralized management and accessing your system remotely.

• Enabling WOL: WOL typically needs to be enabled in your computer's BIOS/UEFI settings and within the network adapter's properties in your operating system's Device Manager.
• ഉപയോഗം: Once enabled, you can use a WOL utility or a network management tool from another device on your network to send a 'magic packet' to wake up your computer.

Figure 3.2: Wake-on-LAN allows remote power control of your computer.

4. പരിപാലനം

The NICGIGA 5Gb Network Card is designed for durability and stable performance. Minimal maintenance is required.

• പൊടി നീക്കം: Periodically inspect your computer's interior and the network card for dust accumulation. Use compressed air to gently clean the card and its heatsink to ensure optimal heat dissipation.
• താപനില മാനേജ്മെൻ്റ്: The card features an excellent heatsink to manage its temperature. Ensure proper airflow within your computer case to prevent overheating, especially during prolonged high-speed data transfers.
• ഡ്രൈവർ അപ്‌ഡേറ്റുകൾ: Keep your network card drivers updated to benefit from performance improvements and bug fixes.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues with your NICGIGA 5Gb Network Card, consider the following troubleshooting steps:

• നെറ്റ്‌വർക്ക് കണക്ഷൻ ഇല്ല:
  • Verify the Ethernet cable is securely connected to both the network card and your router/switch.
  • Check the network status lights on the card and your router/switch.
  • Ensure the network card is properly seated in the PCIe slot. Try re-seating it.
  • Confirm that the drivers are correctly installed and enabled in Device Manager (Windows) or network settings (Linux).
• കുറഞ്ഞ കണക്ഷൻ വേഗത:
  • Ensure your router/switch and Ethernet cable support the desired speed (e.g., 5Gbps).
  • Update to the latest Realtek RTL8126 drivers from the official Realtek website. Out-of-the-box drivers may not provide full performance.
  • In Windows Device Manager, go to the network adapter's properties, then 'Advanced' tab. Look for settings like 'Speed & Duplex' and ensure it's set to 'Auto Negotiation' or the highest supported speed (e.g., '5.0 Gbps Full Duplex').
  • Check power management settings for the network adapter in Device Manager. Disable options like 'Allow the computer to turn off this device to save power' and adjust 'Energy Efficient Ethernet' or similar EPA features to 'Disabled' for maximum performance.
• Card Not Recognized by OS:
  • Ensure the card is fully inserted into the PCIe slot.
  • Try installing the card in a different PCIe slot if available.
  • Check your motherboard's BIOS/UEFI settings to ensure the PCIe slot is enabled.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

NICGIGA stands behind the quality and reliability of its products.

• സാങ്കേതിക സഹായം: Every NICGIGA 5G NIC is rigorously tested. We provide lifetime technical support for this product.
• തിരികെ നൽകൽ നയം: This product is typically eligible for a 30-day return policy for refund or replacement, subject to the retailer's terms and conditions.
• പിന്തുണയുമായി ബന്ധപ്പെടുക: For technical assistance or warranty inquiries, please visit the official NICGIGA brand store or contact NICGIGA customer service through the platform where the product was purchased.

For more information and to explore other NICGIGA products, visit the NICGIGA Store.