CYCLAMI CY110 Smart Brake Sensing Bicycle Taillight User Manual

1. ആമുഖം

Thank you for choosing the CYCLAMI CY110 Smart Brake Sensing Bicycle Taillight. This manual provides essential information for the proper installation, operation, and maintenance of your new taillight. Please read it thoroughly before use to ensure optimal performance and safety.

The CYCLAMI CY110 is designed to enhance your visibility and safety during cycling, featuring smart brake sensing, multiple lighting modes, and a durable, waterproof design.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

2.1 പ്രധാന സവിശേഷതകൾ

• Smart Brake Sensing: Automatically increases brightness upon deceleration to alert following traffic.
• IPX6 വാട്ടർപ്രൂഫ്: Designed to withstand heavy rain and splashes, ensuring reliable performance in various weather conditions.
• ടൈപ്പ്-സി ചാർജിംഗ്: Convenient and fast charging via a modern USB Type-C port.
• ഉയർന്ന തെളിച്ചമുള്ള LED: Provides 60 lumens of light output for excellent visibility.
• Intelligent Sleep & Wakeup: Features a motion sensor that puts the light into hibernation when stationary and wakes it up upon movement, conserving battery.
• ഒന്നിലധികം ലൈറ്റിംഗ് മോഡുകൾ: Offers various modes to suit different riding conditions and preferences.
• ഒതുക്കമുള്ളതും ഭാരം കുറഞ്ഞതും: Weighs only 24g (light only) for minimal impact on your bike's weight.

2.2 ബോക്സിൽ എന്താണുള്ളത്

• CYCLAMI CY110 Bicycle Taillight
• മൌണ്ടിംഗ് ബ്രാക്കറ്റ്
• USB Type-C Charging Cable (not explicitly listed but implied by Type-C charging)

Figure 1: The compact design of the CYCLAMI CY110 taillight.

3. സജ്ജീകരണം

3.1 ടെയിൽലൈറ്റ് ഘടിപ്പിക്കൽ

1. Identify a suitable location on your bicycle's seat post. The mounting bracket is designed for seat post installation.
2. Secure the mounting bracket to the seat post using the provided elastic band. Ensure the bracket is firmly attached and angled correctly so the light will face directly backward.
3. Align the taillight with the grooves on the mounting bracket.
4. Insert the taillight into the bracket and rotate it 90 degrees until it locks securely into place. There are two nubs in the mount that engage with recessed areas on the light.

Figure 2: The CYCLAMI CY110 taillight securely mounted on a bicycle seat post.

3.2 പ്രാരംഭ ചാർജ്

Before first use, it is recommended to fully charge the taillight. Refer to the 'Charging' section for detailed instructions.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 പവർ ഓൺ/ഓഫ്

• To turn on the taillight, പവർ ബട്ടൺ 2 സെക്കൻഡ് അമർത്തിപ്പിടിക്കുക..
• To turn off the taillight, പവർ ബട്ടൺ 2 സെക്കൻഡ് അമർത്തിപ്പിടിക്കുക. വീണ്ടും.

4.2 ലൈറ്റിംഗ് മോഡുകൾ മാറ്റൽ

Once the taillight is on, click the power button to cycle through the available lighting modes. The CY110 features four-position mode adjustment. The specific modes may include constant, various flashing patterns, and breathing flash.

Figure 3: High brightness LED and mode adjustment by pressing the power button.

4.3 Smart Brake Sensing Function

The taillight is equipped with a smart sensor that detects deceleration. When braking or slowing down, the light will automatically increase its brightness by approximately 20% for 5 seconds to provide a clear warning to vehicles behind you. This feature is most noticeable and effective in flashing or breathing modes. In constant-on mode, the brightness boost may be less apparent.

Figure 4: The taillight senses braking and increases brightness for 5 seconds.

4.4 Intelligent Sleep and Vibration Wakeup

To conserve battery, the taillight features an intelligent sleep mode:

• If the bicycle remains stationary for 30 സെക്കൻഡ്, the taillight will enter a dormant (hibernation) state.
• Upon detecting vibration or movement, the light will automatically wake up and resume its previous lighting mode.
• If the light remains in the dormant state for 30 മിനിറ്റ് without any movement, it will perform a forced shutdown to completely power off. To reactivate, you will need to long-press the power button.

Figure 5: Taillight enters dormant mode after 30 seconds of inactivity and wakes up with vibration.

5. ചാർജിംഗ്

The CYCLAMI CY110 taillight is equipped with a Type-C charging port for convenient recharging.

1. Locate the Type-C charging port on the taillight, usually protected by a rubber cover.
2. പോർട്ട് തുറന്നുകാട്ടാൻ റബ്ബർ കവർ സൌമ്യമായി തുറക്കുക.
3. Connect the provided USB Type-C cable to the taillight and the other end to a standard USB power source (e.g., computer, wall adapter, power bank).
4. The light will indicate charging status (e.g., flashing while charging, solid when fully charged).
5. പൂർണ്ണമായി ചാർജ് ചെയ്തുകഴിഞ്ഞാൽ, കേബിൾ വിച്ഛേദിച്ച് റബ്ബർ കവർ സുരക്ഷിതമായി അടയ്ക്കുക, അങ്ങനെ ജല പ്രതിരോധം നിലനിർത്താൻ കഴിയും.

ബാറ്ററി ലൈഫ്:

• Always-on mode: Approximately 3.5 hours
• Other modes: Approximately 6 hours

Figure 6: Charging the taillight using the Type-C port.

6. പരിപാലനം

6.1 വൃത്തിയാക്കൽ

Wipe the taillight with a soft, damp cloth to remove dirt and dust. Avoid using harsh chemicals or abrasive materials that could damage the casing അല്ലെങ്കിൽ ലെൻസ്.

6.2 ജല പ്രതിരോധം

The CY110 has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. It is safe for use in heavy rain. However, it is not designed for prolonged immersion in water. Ensure the Type-C charging port cover is securely closed to maintain water resistance.

Figure 7: The taillight is IPX6 waterproof and weather resistant.

6.3 സംഭരണം

When not in use for extended periods, store the taillight in a cool, dry place. It is advisable to charge the battery periodically (e.g., every 3-6 months) to maintain battery health.

7. പ്രശ്‌നപരിഹാരം

• ലൈറ്റ് ഓണാക്കുന്നില്ല:
  Ensure the battery is charged. Press and hold the power button for 2 seconds to turn it on.
• Brake sensing not working as expected:
  The brake sensing feature is most noticeable in flashing or breathing modes. In constant-on mode, the brightness increase is subtle. Ensure the light is securely mounted and not obstructed.
• അപ്രതീക്ഷിതമായി ലൈറ്റ് ഓഫാകുന്നു:
  The taillight features an intelligent sleep mode. If stationary for 30 seconds, it enters hibernation. After 30 minutes of inactivity, it performs a forced shutdown. Simply move the bike to wake it up, or long-press the power button if it has fully shut down.
• വെള്ളം കയറുന്നത്:
  Ensure the Type-C charging port cover is fully sealed after charging. While IPX6 rated, prolonged immersion is not recommended.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

വാറന്റി വിവരങ്ങൾക്കും ഉപഭോക്തൃ പിന്തുണയ്ക്കും, നിങ്ങളുടെ വാങ്ങലിനൊപ്പം നൽകിയിരിക്കുന്ന ഡോക്യുമെന്റേഷൻ പരിശോധിക്കുകയോ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.