1. ആമുഖം
Thank you for choosing the AquaJoyer Solar Pool Fountain with 8-Color 6-Mode RGBIC LED Lights. This innovative product enhances your pool experience by providing a beautiful water feature, cooling effect, and vibrant lighting. Designed for both above-ground and in-ground pools, it offers convenience with solar charging and remote control. Please read this manual carefully before installation and operation to ensure optimal performance and safety.
2 സുരക്ഷാ വിവരങ്ങൾ
- Always ensure the pool pump is turned off before installing or performing maintenance on the fountain.
- റിമോട്ട് കൺട്രോൾ വരണ്ടതും വെള്ളത്തിൽ നിന്ന് അകറ്റി നിർത്തുന്നതും ഉറപ്പാക്കുക.
- യൂണിറ്റ് സ്വയം വേർപെടുത്താനോ നന്നാക്കാനോ ശ്രമിക്കരുത്. സഹായത്തിനായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
- Ensure the fountain is securely attached to the pool inlet to prevent accidental detachment.
- Keep children and pets away from the fountain during installation and while the pump is running.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview
The AquaJoyer Solar Pool Fountain consists of the main fountain unit with integrated RGBIC LED lights, a solar panel, and a remote control. It connects directly to your pool's return jet.
Figure 1: Main components of the Solar Pool Fountain.
4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
The fountain is designed for easy installation with most standard pool inlets.
- അനുയോജ്യത പരിശോധന: Ensure your pool has 1½" or 1¼" inlets. This fountain is അനുയോജ്യമല്ല with Summerwave & Funsicle pools. For optimal spray performance, a pump of 0.2 HP or higher is recommended. A 0.75 HP sand pump can achieve up to a 10m spray.
- ജലധാര കൂട്ടിച്ചേർക്കുക: Connect the fountain heads to the main unit. Ensure all connections are secure.
- Attach to Pool Inlet: With the pool pump OFF, remove the existing return jet fitting from your pool. Screw the AquaJoyer fountain unit directly into the pool's return inlet. Hand-tighten until secure.
- സ്ഥാനനിർണ്ണയം: Adjust the angle of the fountain heads to achieve your desired spray pattern (Disperse or Cross Spray). The unit is 360° adjustable. Position the solar panel to receive maximum direct sunlight.
ചിത്രം 2: ഇൻസ്റ്റലേഷൻ ഉദാamples for above-ground and in-ground pools.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Your AquaJoyer Solar Pool Fountain is designed for intelligent and convenient operation.
- Light-Sensing Auto On/Off: The built-in light sensor automatically turns on the RGBIC LED lights as dusk falls. The lights will operate for 4 hours and then automatically shut off to conserve energy.
- RGBIC Lighting with Smart Memory: Use the included remote control to select from 6 dynamic lighting modes and 8 single-color options. The RGBIC effects provide smooth color transitions. The memory function will recall your last chosen setting when the lights turn on again.
- Dual Charging: Solar + Fast Type-C: The high-efficiency monocrystalline solar panel (22% conversion rate) charges the internal battery during the day, providing up to 15 hours of light. For faster charging or during periods of low sunlight, use the Type-C port. A full charge via Type-C takes approximately 4 hours.
- റിമോട്ട് കൺട്രോൾ: The remote allows you to effortlessly adjust light modes, brightness, and power from up to 98ft (30m) away.
- Dual Spray & Cooling Effect: The twin fountain heads offer both Cross and Parallel spray patterns. These can be adjusted 360° for desired effect. The fountain also helps cool pool water by 10–20°F on hot days by increasing surface area for evaporation.
Figure 3: RGBIC Light Commander and remote control functions.
Figure 4: Solar and Type-C charging capabilities.
6. പരിപാലനം
Regular maintenance ensures the longevity and optimal performance of your solar pool fountain.
- സോളാർ പാനൽ വൃത്തിയാക്കൽ: ഇടയ്ക്കിടെ സോഫ്റ്റ്, ഡി-ടൈപ്പ് ഉപയോഗിച്ച് സോളാർ പാനൽ തുടയ്ക്കുക.amp cloth to remove dust, debris, or water spots. A clean panel ensures maximum charging efficiency.
- Fountain Nozzle Cleaning: If the water spray appears weak or uneven, check the fountain nozzles for any blockages (e.g., leaves, algae). Clean them gently with a small brush if necessary.
- ശീതകാലം: Before freezing temperatures arrive, remove the fountain from the pool. Clean it thoroughly, allow it to dry completely, and store it in a dry, protected area away from direct sunlight and extreme temperatures.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Lights not turning on or dim | Insufficient solar charge; Solar panel dirty; Remote control battery low or out of range; Light sensor obstructed. | Ensure solar panel is clean and receives direct sunlight. Charge via Type-C. Replace remote battery. Ensure light sensor is clear. |
| Fountain spray is weak or uneven | Low pump HP; Nozzles clogged; Improper installation. | Verify pump meets 0.2 HP+ requirement. Clean nozzles. Re-check connection to pool inlet for secure fit. |
| Fountain does not stay upright/falls off | Loose connection to pool inlet. | Ensure the fountain is securely and tightly screwed into the pool inlet. |
8 സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: പൂൾ-06
- അളവുകൾ: 4 x 3 x 8 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 3.61 പൗണ്ട്
- ഊർജ്ജ സ്രോതസ്സ്: Solar / Type-C
- LED നിറങ്ങൾ: 8 Pure Colors
- ലൈറ്റിംഗ് മോഡുകൾ: 6 ചലനാത്മക മോഡുകൾ
- സോളാർ പാനൽ കാര്യക്ഷമത: 22% Monocrystalline
- വിദൂര നിയന്ത്രണ ശ്രേണി: 98 അടി / 30 മീറ്റർ വരെ
- Water Cooling Effect: 10-20°F
- അനുയോജ്യത: Most 1½"/1¼" pool inlets (excluding Summerwave & Funsicle)
- Recommended Pump: 0.2 HP+ (up to 10m spray with 0.75 HP sand pump)
- പ്രത്യേക സവിശേഷത: യുവി പ്രതിരോധം
9. വാറൻ്റിയും പിന്തുണയും
AquaJoyer provides a limited warranty for this product against defects in materials and workmanship. For warranty claims, technical support, or any questions regarding your Solar Pool Fountain, please contact our customer service team. Please have your model number (POOL-06) and purchase information ready when contacting support.
ബന്ധപ്പെടാനുള്ള ഇമെയിൽ: AquaJoyer@outlook.com
