Brio 740 Bottom Load Water Dispenser User Manual

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Brio 740 Bottom Load Cooler is designed for effortless and convenient hydration. This dispenser features a bottom-load design for easy bottle replacement, an illuminated touch interface, automatic UV self-cleaning, and adjustable hot and cold water temperatures. Its sleek stainless-paneled design enhances any home or office environment.

ചിത്രം: മുൻഭാഗം view of the Brio 740 Bottom Load Water Dispenser, showing the stainless steel exterior and a cutaway view revealing a 5-gallon water bottle in the lower compartment.

പ്രധാന സവിശേഷതകൾ

• പ്രീമിയം ഡിസൈൻ: Sleek stainless steel with food-grade 304 stainless reservoirs.
• Easy Bottom Loading: Slide-in design for 5-gallon bottles, no heavy lifting.
• Adjustable Hot & Cold: 7 temperature settings (room, 3 hot, 3 cold) with fast dispensing and a 13.5-inch dispense height. Hot water safety lock included.
• Advanced Digital Display: Bright LED touch display with 24/7 illumination, empty bottle and self-cleaning indicators, digital clock, and night light.
• സ്വയം വൃത്തിയാക്കൽ: Automatic UV light process to reduce biofilm buildup in the cold water tank.

സജ്ജീകരണ ഗൈഡ്

Before initial use, please follow these steps to ensure proper setup and operation of your Brio water dispenser.

അൺബോക്‌സിംഗും പ്ലേസ്‌മെന്റും

1. ഡിസ്പെൻസർ അതിന്റെ പാക്കേജിംഗിൽ നിന്ന് ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
2. Place the dispenser on a flat, stable surface in a cool, dry location away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
3. Allow the dispenser to stand upright for at least 4 hours before plugging it in. This allows the compressor fluids to settle.

Installing the Water Bottle

1. Open the lower compartment door of the dispenser.
2. Remove the cap from a standard 5-gallon water bottle.
3. Insert the probe assembly into the opening of the water bottle. Ensure the probe is fully inserted and the silicone seal is snug.
4. Slide the water bottle into the lower compartment. The bottom-loading design eliminates the need for heavy lifting.
5. കമ്പാർട്ട്മെൻ്റ് വാതിൽ സുരക്ഷിതമായി അടയ്ക്കുക.
6. ഡിസ്പെൻസർ ഒരു ഗ്രൗണ്ടഡ് ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റിലേക്ക് പ്ലഗ് ചെയ്യുക.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Powering On and Initial Fill

Once plugged in, the dispenser will begin to fill its internal reservoirs. This process may take a few minutes. Do not dispense water until the reservoirs are full, indicated by the absence of gurgling sounds and the display showing ready status.

വെള്ളം വിതരണം ചെയ്യുന്നു

• Place a cup or container under the dispensing nozzle.
• On the LED touch display, select your desired water temperature:
  • തണുത്ത വെള്ളം: Press the "Cold" icon. There are 3 adjustable cold temperature settings.
  • മുറിയിലെ താപനില വെള്ളം: Press the "Room Temp" icon.
  • ചൂടുവെള്ളം: Press the "Hot" icon. There are 3 adjustable hot temperature settings.
• Water will dispense. Release the button to stop the flow.

Child Safety Lock (Hot Water)

To dispense hot water, you must first engage the child safety lock mechanism. This prevents accidental hot water dispensing. Consult the display for specific instructions on activating the hot water dispense function.

Advanced Digital Display Functions

• ശൂന്യമായ കുപ്പി സൂചകം: An icon will illuminate when the 5-gallon bottle is empty, signaling it's time for replacement.
• Self-Cleaning Indicator: An icon will show when the automatic UV self-cleaning cycle is active.
• ഡിജിറ്റൽ ക്ലോക്ക്: നിലവിലെ സമയം പ്രദർശിപ്പിക്കുന്നു.
• രാത്രി വെളിച്ചം: Provides illumination for easy water selection in low-light conditions.

മെയിൻ്റനൻസ്

UV Self-Cleaning Function

The Brio 740 features an automatic UV self-cleaning process that uses ultraviolet light to reduce biofilm buildup and other accumulated impurities in the cold water tank. This helps maintain water quality and minimizes manual cleaning requirements. The display will indicate when this cycle is active.

ജനറൽ ക്ലീനിംഗ്

• പുറം: ഒരു മൃദുവായ, ഡി ഉപയോഗിച്ച് ബാഹ്യ പ്രതലങ്ങൾ തുടയ്ക്കുകamp തുണി. ഉരച്ചിലുകൾ ഉണ്ടാക്കുന്ന ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
• ഡ്രിപ്പ് ട്രേ: Regularly remove and empty the drip tray. Wash it with mild soap and water, then rinse thoroughly and replace.
• Dispensing Nozzles: Periodically wipe the dispensing nozzles with a clean cloth.

Do not immerse the dispenser in water or spray water directly onto the unit.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Brio water dispenser, please refer to the following table for common problems and their solutions.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Brio products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Brio webസൈറ്റ്.

For technical assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please contact Brio Customer Support:

• ഓൺലൈൻ പിന്തുണ: സന്ദർശിക്കുക Brio Store on Amazon or the official Brio webസൈറ്റ്.
• ഫോൺ പിന്തുണ: നിങ്ങളുടെ ഉൽപ്പന്ന പാക്കേജിംഗ് അല്ലെങ്കിൽ ഔദ്യോഗിക webനിലവിലെ കോൺടാക്റ്റ് നമ്പറുകൾക്കായുള്ള സൈറ്റ്.

Please have your model number (CLBL740SC) and purchase date available when contacting support.