iHome Rechargeable Auto Sensing LED Light Bars (4-Pack)

1. ആമുഖം

Thank you for choosing the iHome Rechargeable Auto Sensing LED Light Bars. This manual provides essential information for the safe and efficient use of your new lighting solution. These versatile LED light bars are designed to provide convenient, motion-activated illumination for various indoor spaces such as cabinets, closets, hallways, and more. Featuring a rechargeable battery, dimmable brightness, and easy installation, these lights enhance visibility and energy efficiency in your home.

2 സുരക്ഷാ വിവരങ്ങൾ

ഈ ഉൽപ്പന്നം ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ സുരക്ഷാ നിർദ്ദേശങ്ങളും വായിക്കുക. ഈ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് വൈദ്യുതാഘാതം, തീപിടുത്തം അല്ലെങ്കിൽ മറ്റ് അപകടങ്ങൾക്ക് കാരണമായേക്കാം.

• Do not expose the light bars to water or excessive moisture. This product is designed for indoor use only.
• Do not attempt to disassemble, repair, or modify the light bars. Refer all servicing to qualified personnel.
• താപ സ്രോതസ്സുകൾ, നേരിട്ടുള്ള സൂര്യപ്രകാശം, കത്തുന്ന വസ്തുക്കൾ എന്നിവയിൽ നിന്ന് അകറ്റി നിർത്തുക.
• Ensure the installation surface is clean and dry before applying adhesive metal plates.
• Use only the provided USB charging cables for recharging.
• Do not stare directly into the LED light source, as it may cause eye strain.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 4 x iHome Rechargeable Auto Sensing LED Light Bars
• 4 x USB ചാർജിംഗ് കേബിളുകൾ
• 8 x Metal Plates with Adhesive (2 per light bar for secure mounting)

4. ഉൽപ്പന്ന സവിശേഷതകൾ

• തെളിച്ചം: 50 lumens, with three adjustable brightness modes (20%, 50%, 100%).
• വർണ്ണ താപനില: Offers Warm White, Natural White, and Cool White light options (approximately 3000K, 4500K, 6000K).
• മോഷൻ സെൻസർ: Detects movement up to 19.6 feet (6 meters) within a 120° angle.
• യാന്ത്രിക മോഡ്: Automatically turns on in dark conditions when motion is detected and turns off after 20 seconds of no motion.
• എപ്പോഴും-ഓൺ മോഡ്: തുടർച്ചയായ പ്രകാശം നൽകുന്നു.
• എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Built-in magnets for direct attachment to metallic surfaces, or use included adhesive metal plates for non-metallic surfaces.
• റീചാർജ് ചെയ്യാവുന്ന ബാറ്ററി: High-capacity battery with USB-C charging for eco-friendly operation.

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The iHome LED Light Bars offer flexible installation options.

5.1 പ്രാരംഭ ചാർജ്

Before first use, fully charge each light bar. Refer to Section 7 for charging instructions.

5.2 മൗണ്ടിംഗ് ഓപ്ഷനുകൾ

Option 1: Magnetic Attachment (for metallic surfaces)

• Simply place the light bar directly onto any metallic surface. The built-in magnets will hold it in place.

Option 2: Adhesive Metal Plates (for non-metallic surfaces)

1. Choose a clean, dry, and smooth surface for installation.
2. Peel off the protective film from one side of the adhesive metal plate.
3. Stick the metal plate firmly onto the desired surface. Apply pressure for 30 seconds to ensure strong adhesion.
4. Attach the light bar to the metal plate. The light bar's magnets will securely connect to the plate.
5. Repeat for additional light bars as needed.

Image: Illustration of installing the light bars using built-in magnets on a refrigerator and adhesive metal plates under a cabinet.

ചിത്രം: ഉദാample of iHome LED Light Bars providing illumination inside kitchen cabinets.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Each light bar features a multi-function button to control its settings.

6.1 മോഡ് തിരഞ്ഞെടുക്കൽ

Press the multi-function button to cycle through the following modes:

• ഓഫാണ്: ലൈറ്റ് ഓഫ് ചെയ്തു.
• ഓട്ടോ മോഡ്: The light will only activate in dark conditions when motion is detected. It will turn off automatically after 20 seconds of no motion.
• ALWAYS-ON Mode: The light remains continuously on until manually turned off or the battery is depleted.

Image: Diagram illustrating the motion sensor range (9.84ft-16.40ft, 120 degrees) and 20-second auto shut-off feature.

6.2 തെളിച്ചം ക്രമീകരിക്കൽ

While the light is on (in either AUTO or ALWAYS-ON mode), press and hold the multi-function button to cycle through the three brightness levels: 20%, 50%, and 100%. Release the button when the desired brightness is reached.

6.3 വർണ്ണ താപനില തിരഞ്ഞെടുക്കൽ

To change the light's color temperature, quickly double-press the multi-function button. The light will cycle between Warm White, Natural White, and Cool White. Select the color temperature that best suits your environment.

Image: Visual representation of the three available color temperature settings: Warm White, Natural White, and Cool White.

7 ഉപകരണം ചാർജ് ചെയ്യുന്നു

Each iHome LED Light Bar is equipped with a rechargeable battery.

1. When the battery is low, the light output may diminish, or the light may not turn on.
2. Gently detach the light bar from its magnetic mounting location.
3. Connect one end of the provided USB charging cable to the charging port on the light bar.
4. USB കേബിളിന്റെ മറ്റേ അറ്റം ഒരു സാധാരണ USB പവർ അഡാപ്റ്ററുമായി (ഉൾപ്പെടുത്തിയിട്ടില്ല) അല്ലെങ്കിൽ ഒരു കമ്പ്യൂട്ടർ USB പോർട്ടുമായി ബന്ധിപ്പിക്കുക.
5. The charging indicator light will illuminate (typically red) during charging.
6. Once fully charged (approximately 1 hour for rapid recharge), the indicator light will change color (typically green or turn off).
7. A full charge provides approximately 6 hours of continuous use in Always-On mode or up to 250 uses in Auto mode.
8. After charging, disconnect the cable and reattach the light bar to its mounting location.

Image: Close-up of the light bar showing the USB-C charging port and cable connection, highlighting its rechargeable nature.

8. പരിപാലനവും പരിചരണവും

To ensure the longevity and optimal performance of your iHome LED Light Bars, follow these care guidelines:

• വൃത്തിയാക്കൽ: Wipe the light bars with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse in water.
• ബാറ്ററി കെയർ: For best battery life, avoid fully discharging the lights frequently. Recharge them when the light output noticeably dims. If storing for an extended period, charge the lights every 3-6 months.
• സംഭരണം: Store the light bars in a cool, dry place away from direct sunlight and extreme temperatures.
• Adhesive Plates: If the adhesive on the metal plates loses its stickiness, replace them with new double-sided adhesive tape.

9. പ്രശ്‌നപരിഹാരം

If you encounter issues with your iHome LED Light Bars, refer to the following common problems and solutions:

10 സ്പെസിഫിക്കേഷനുകൾ

11. വാറൻ്റിയും പിന്തുണയും

iHome products are designed with quality and reliability in mind. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included with your purchase or visit the official iHome webസൈറ്റ്.

If you require technical support, have questions about your product, or need assistance with troubleshooting, please contact iHome customer service through their official website or the contact information provided in your product packaging. Please have your model number (2IHLT10) and proof of purchase ready when contacting support.