ആമുഖം
The AUTO-VOX X8 Monitor Bracket is a versatile and durable mounting solution for your backup camera monitor. Designed for flexibility and strong hold, it allows you to securely position your monitor in various locations within your vehicle or RV, ensuring optimal viewing angles and enhanced safety. This manual provides detailed instructions for setup, operation, and maintenance.
പ്രധാന സവിശേഷതകൾ
- ബഹുമുഖ മൗണ്ടിംഗ്: Securely attach your monitor to RV walls, windows, camping tables, dashboards, or windshields.
- Effortless Installation & Removal: Tool-free setup and removal with no sticky residue left behind.
- സ്ട്രോങ് സക്ഷൻ കപ്പ്: Provides a rock-solid hold on smooth surfaces, allowing for unlimited repositioning.
- Flexible & Adjustable: Features a bendable arm and 360° rotation for precise positioning and optimal viewകോണുകൾ.
- മോടിയുള്ള ഡിസൈൻ: Built to withstand bumps, potholes, and extreme temperatures for reliable performance.
- വിശാലമായ അനുയോജ്യത: Specifically designed for AUTO-VOX Solar 3A Plus, Solar 4B, Solar 5, and WF1 screens.
Image: The AUTO-VOX X8 mount demonstrating its flexible and bendable arm, allowing for various monitor positions within a vehicle.
Image: Close-up of the mount's 360° rotating ball head, highlighting its firm buckle for flexible screen adjustment.
പാക്കേജ് ഉള്ളടക്കം
ഇൻസ്റ്റാളേഷനുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- AUTO-VOX X8 Monitor Bracket (Bendable Suction Cup Mount)
- 3M Adhesive Pad (for dashboard mounting)
- Electrostatic Film Piece (for windshield mounting)
- ഇൻസ്ട്രക്ഷൻ മാനുവൽ
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to install your AUTO-VOX X8 Monitor Bracket:
- ഉപരിതലം തയ്യാറാക്കുക: Choose a clean, smooth, and flat surface for mounting (e.g., windshield, dashboard, RV wall). Ensure the surface is free of dust, grease, or moisture.
- Apply Electrostatic Film (Optional, for windshield): If mounting on a windshield, apply the electrostatic film piece to the desired location first. This helps protect the windshield and provides a better surface for the suction cup.
- Attach 3M Adhesive Pad (Optional, for dashboard): If mounting on a dashboard or textured surface, peel off the protective film from the 3M adhesive pad and firmly press it onto the chosen spot. Allow it to set for a few minutes before attaching the mount.
- സക്ഷൻ കപ്പ് സ്ഥാപിക്കുക: Remove the protective plastic film from the suction cup. Place the suction cup firmly onto the prepared surface or the 3M pad.
- സക്ഷൻ കപ്പ് സുരക്ഷിതമാക്കുക: Press down the lever on the suction cup base to create a vacuum seal, ensuring a rock-solid hold.
- മോണിറ്റർ ഘടിപ്പിക്കുക: Align the back of your compatible AUTO-VOX monitor (Solar 3A Plus/4B/5/WF1) with the mounting bracket on the X8 mount. Slide it into place until it clicks securely.
- Adjust Initial Angle: Loosen the adjustment knob on the mount's arm to set the desired extension and angle. Tighten the knob to lock it in position.
Image: Visual guide showing the three-step installation process: 1. Clean the surface, 2. Press hard for stronger suction, 3. Press the suction cup fastener.
ഓപ്പറേഷൻ
The AUTO-VOX X8 mount offers flexible adjustments for optimal monitor positioning:
- Adjusting Arm Extension: Loosen the knob on the bendable arm to extend or retract the arm, then tighten to secure.
- Tilting the Monitor: The mount's ball head allows for 360° rotation and tilt. Loosen the corresponding knob, adjust the monitor to your preferred viewing angle, and then tighten the knob firmly.
- Repositioning the Mount: To move the entire mount, simply lift the lever on the suction cup base to release the vacuum seal. Reposition the mount and re-secure the suction cup as described in the installation steps.
മെയിൻ്റനൻസ്
To ensure optimal performance and longevity of your suction cup mount:
- സക്ഷൻ കപ്പ് വൃത്തിയാക്കുക: If the suction cup loses its adhesion, simply wash it with warm water and let it air dry. This will restore its powerful suction capabilities.
- വൃത്തിയുള്ള മൗണ്ടിംഗ് ഉപരിതലം: Regularly clean the surface where the mount is attached to prevent dust or debris from compromising the suction.
Image: Illustration showing how washing the suction cup with water easily restores its powerful adhesion.
ട്രബിൾഷൂട്ടിംഗ്
- Mount is not sticking: Ensure the mounting surface is clean, smooth, and dry. Wash the suction cup with water and let it air dry to restore adhesion. For dashboards, use the provided 3M adhesive pad.
- Monitor does not attach securely: Verify that your monitor has the compatible square slot on its back for the mounting bracket. The X8 mount is designed for AUTO-VOX Solar 3A Plus, Solar 4B, Solar 5, and WF1 screens.
- Limited adjustability: Loosen all adjustment knobs before attempting to reposition the arm or tilt the monitor. Ensure they are tightened firmly after adjustment.
സ്പെസിഫിക്കേഷനുകൾ
| പാക്കേജ് അളവുകൾ | 11.3 x 7.05 x 1.54 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 4.8 ഔൺസ് |
| ബ്രാൻഡ് | ഓട്ടോ-വോക്സ് |
| മോഡൽ | X8 |
| നിറം | കറുപ്പ് |
| പ്രത്യേക സവിശേഷതകൾ | മടക്കാവുന്ന |
| മൗണ്ടിംഗ് തരം | ഉപരിതലം |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | Solar 3A Plus/Solar 4B/5/WF1 |
വാറൻ്റി & പിന്തുണ
For any questions, technical support, or warranty claims regarding your AUTO-VOX X8 Monitor Bracket, please contact AUTO-VOX customer service directly. Refer to the product packaging or the official AUTO-VOX webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുള്ള സൈറ്റ്.
