ആമുഖം
Thank you for choosing the Westbrass E507DUS-07 Universal Fit 7-inch Diverter Tub Spout. This product is designed for durability and ease of installation, featuring a universal adapter system to accommodate various plumbing configurations. This manual provides essential information for safe installation, proper operation, and effective maintenance to ensure long-lasting performance.
പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
- ഏതെങ്കിലും പ്ലംബിംഗ് ജോലികൾ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും പ്രധാന ജലവിതരണം ഓഫ് ചെയ്യുക.
- ഇൻസ്റ്റാളേഷൻ സമയത്ത് സുരക്ഷാ ഗ്ലാസുകൾ, കയ്യുറകൾ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ധരിക്കുക.
- ചോർച്ച തടയാൻ എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കുക. അമിതമായി മുറുക്കരുത്.
- ഏതെങ്കിലും ഘട്ടത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു പ്ലംബറെ സമീപിക്കുക.
- ചെറിയ ഭാഗങ്ങൾ കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.
പാക്കേജ് ഉള്ളടക്കം
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:
- 7-inch Diverter Tub Spout (Satin Nickel)
- ടെഫ്ലോൺ ടേപ്പ്
- 1/2-inch Copper Pipe Fitting Adapter
- Brass Adapter (for 1/2-inch IPS or 3/4-inch IPS connections)
- ഹെക്സ് വഞ്ചി
- Extension Nipple (4-inch)

Image: The Westbrass E507DUS-07 tub spout with its diverter button, along with the included Teflon tape, 1/2-inch copper pipe fitting adapter, brass adapter, hex wrench, and 4-inch extension nipple.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | വെസ്റ്റ്ബ്രാസ് |
| മോഡലിൻ്റെ പേര് | Universal Fit 7" Diverter Tub Spout, Zinc |
| മോഡൽ നമ്പർ | E507DUS-07 |
| മെറ്റീരിയൽ | സിങ്ക് |
| പൂർത്തിയാക്കുക | സാറ്റിൻ നിക്കൽ (ബ്രഷ് ചെയ്തത്) |
| സ്പൗട്ട് റീച്ച് | 7 ഇഞ്ച് |
| മൗണ്ടിംഗ് തരം | മതിൽ മൗണ്ട് |
| പ്രത്യേക ഫീച്ചർ | Leak Resistant, Diverter Function |
| ഉൽപ്പന്ന അളവുകൾ | 7"D x 2.5"W x 2.5"H |
| ഇനത്തിൻ്റെ ഭാരം | 12 ഔൺസ് |
| യു.പി.സി | 747028638821 |

Image: The Westbrass E507DUS-07 tub spout showing its overall length of 7 inches and a base length of 5 3/8 inches, alongside the included installation components.

ചിത്രം: മുകളിൽ നിന്ന് താഴേക്ക് view of the Westbrass E507DUS-07 tub spout, indicating a 7-inch length and 2.5-inch height, with the diverter button visible.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
ആവശ്യമായ ഉപകരണങ്ങൾ
- Adjustable Wrench or Pipe Wrench
- Screwdriver (if applicable for set screw)
- ടെഫ്ലോൺ ടേപ്പ് (ഉൾപ്പെടുത്തിയിരിക്കുന്നു)
- ഹെക്സ് റെഞ്ച് (ഉൾപ്പെട്ടിരിക്കുന്നു)
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ
The Westbrass E507DUS-07 tub spout is designed for universal fit, accommodating 1/2-inch copper, 1/2-inch IPS, or 3/4-inch IPS connections. Follow the steps below based on your existing plumbing.
- ജലവിതരണം ഓഫാക്കുക: Locate and turn off the main water supply to your bathroom or entire house. Open a faucet to relieve pressure.
- Remove Old Tub Spout: If replacing an existing spout, loosen any set screws on the underside of the spout or unscrew it counter-clockwise from the wall pipe. Clean the area around the pipe.
- Determine Connection Type: Identify if your existing pipe is 1/2-inch copper, 1/2-inch Male Threaded (IPS), or 3/4-inch Male Threaded (IPS).
- കണക്ഷൻ തയ്യാറാക്കുക:
- For 1/2-inch Copper Pipe Connection: Ensure the copper pipe extends approximately 1-1/2 inches from the wall. Slide the 1/2-inch copper pipe fitting adapter onto the copper pipe. Secure it with the included hex wrench if there's a set screw.
- For 1/2-inch Male Threaded Connection (IPS): Apply Teflon tape to the threads of the existing 1/2-inch male threaded pipe. Thread the brass adapter onto the pipe.
- For 3/4-inch Male Threaded Connection (IPS): Apply Teflon tape to the threads of the existing 3/4-inch male threaded pipe.
- Install Extension Nipple (if needed): If your pipe does not extend far enough from the wall, use the included 4-inch extension nipple. Apply Teflon tape to the threads and connect it to your wall pipe or adapter.
- Attach Tub Spout:
- For Slip-On (Copper) or Adapter Connections: Slide the tub spout onto the pipe/adapter assembly until it is flush with the wall. Secure it by tightening the set screw on the underside of the spout with the hex wrench.
- For Threaded Connections (1/2-inch or 3/4-inch IPS): Carefully thread the tub spout onto the pipe/adapter assembly clockwise until it is hand-tight and properly aligned. Use a wrench for a final snug turn, but do not overtighten.
- ചോർച്ചയ്ക്കുള്ള പരിശോധന: Slowly turn the main water supply back on. Check all connections for leaks. If leaks occur, turn off the water, re-tighten connections, and re-test.

Image: Diagram illustrating four common installation scenarios for the Westbrass E507DUS-07 diverter tub spout, including 1/2-inch copper pipe, 1/2-inch male threaded, 3/4-inch male threaded, and 1/2-inch male pipe with threaded end connections, showing how the adapters and extension nipple are used.

ചിത്രം: പൊട്ടിത്തെറിച്ച ഒരു view diagram of the Westbrass E507DUS-07 tub spout, detailing its internal components such as the body, rod, O-rings, knob, gate, insert pipe, bushings, and set screw, along with a parts list.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Westbrass E507DUS-07 tub spout features a diverter mechanism to switch water flow between the tub spout and a showerhead.
- For Tub Fill: Ensure the diverter knob on top of the spout is in the down position. Water will flow from the tub spout.
- For Shower: Pull the diverter knob upwards. This will redirect water flow to your showerhead. Push the knob down to return water flow to the tub spout.
പരിപാലനവും പരിചരണവും
To maintain the finish and functionality of your tub spout, follow these guidelines:
- വൃത്തിയാക്കൽ: Clean the spout regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the satin nickel finish.
- Diverter Maintenance: If the diverter mechanism becomes stiff, a small amount of silicone-based lubricant can be applied to the moving parts.
- ചോർച്ച തടയൽ: Periodically check for any signs of leaks around the base of the spout. Address any leaks promptly by re-tightening connections or replacing worn seals.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter with your tub spout.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Water leaks from the base of the spout. | Loose connection, insufficient Teflon tape, or damaged O-ring/gasket. | Turn off water supply. Re-tighten the spout connection. If threaded, ensure adequate Teflon tape is applied. Inspect and replace any damaged O-rings or gaskets. |
| Diverter knob is stiff or not engaging. | ധാതുക്കളുടെ ശേഖരണം അല്ലെങ്കിൽ ലൂബ്രിക്കേഷന്റെ അഭാവം. | Clean the diverter mechanism. Apply a small amount of silicone-based lubricant to the moving parts of the diverter. |
| Water continues to drip from the tub spout when the diverter is engaged for the shower. | Worn diverter gate or O-rings inside the spout. | This indicates internal wear. Refer to the exploded view diagram (Image: Westbrass E507DUS-07 Exploded View Diagram) and consider replacing the internal gate or O-rings. If the issue persists, replacement of the spout may be necessary. |
| Spout does not fit existing plumbing. | Incorrect adapter used or incompatible pipe type. | Review the "Setup and Installation" section and the installation diagram (Image: Westbrass E507DUS-07 Installation Diagram) to ensure the correct adapter is selected for your pipe type (1/2-inch copper, 1/2-inch IPS, or 3/4-inch IPS). Confirm pipe extension from the wall is adequate. |
വാറൻ്റിയും പിന്തുണയും
Westbrass products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the official Westbrass webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
For additional information and products, you may visit the Westbrass Storefront.





