Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah

Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah User Manual

സുരക്ഷിതവും ഫലപ്രദവുമായ ഉപയോഗത്തിനുള്ള സമഗ്രമായ നിർദ്ദേശങ്ങൾ.

1. ആമുഖം

This manual provides essential information for the safe operation, maintenance, and storage of your Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah. Please read these instructions carefully before using the battery to ensure optimal performance and safety.

2. പ്രധാന സുരക്ഷാ നിർദ്ദേശങ്ങൾ

മുന്നറിയിപ്പ്: ഈ സുരക്ഷാ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് തീപിടുത്തം, വൈദ്യുതാഘാതം അല്ലെങ്കിൽ ഗുരുതരമായ പരിക്കിന് കാരണമായേക്കാം.

  • Always use the battery with compatible Hyper Tough 20V Max tools and chargers. Using incompatible accessories may cause damage or injury.
  • ബാറ്ററി വെള്ളത്തിലോ മറ്റ് ദ്രാവകങ്ങളിലോ മുക്കരുത്.
  • Do not store or use the battery in locations where the temperature may reach or exceed 104°F (40°C), such as in direct sunlight or inside a vehicle.
  • ബാറ്ററി കത്തിക്കരുത്. അത് തീയിൽ പൊട്ടിത്തെറിച്ചേക്കാം.
  • Do not short-circuit the battery terminals. Avoid contact with conductive materials like keys, coins, or jewelry.
  • Do not disassemble, open, or modify the battery pack.
  • If battery fluid leaks, avoid contact with skin and eyes. If contact occurs, flush with water and seek medical attention.
  • ബാറ്ററി കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
  • Dispose of batteries responsibly according to local regulations. Do not dispose of in household waste.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah provides reliable power for your Hyper Tough 20V Max cordless tools. Its compact design and lithium-ion technology offer consistent performance.

Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah

An image showing the Hyper Tough HT Charge 20V Max Lithium-Ion Battery 1.5 Ah. The battery is black with a red label displaying 'HT CHARGE' and '20V MAX 1.5Ah LITHIUM-ION'.

4. സജ്ജീകരണവും പ്രാരംഭ ചാർജും

  1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the battery from its packaging. Inspect for any signs of damage.
  2. ചാർജിംഗ്: Before first use, fully charge the battery using a compatible Hyper Tough 20V Max battery charger. Follow the charger's instructions for proper charging procedures.
  3. ഇൻസ്റ്റലേഷൻ: Align the battery with the battery slot on your Hyper Tough 20V Max tool. Slide the battery into place until it clicks securely. Ensure it is firmly seated before operation.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

  • ബാറ്ററി നില: Monitor the battery charge level, if indicated on your tool or charger, to avoid complete discharge, which can reduce battery life.
  • അമിത ചൂടാക്കൽ: If the battery becomes excessively hot during use, discontinue operation and allow it to cool down before recharging or resuming work.
  • നീക്കം ചെയ്യൽ: To remove the battery from a tool, press the release button (if present) and slide the battery out.

6. പരിപാലനവും സംഭരണവും

  • വൃത്തിയാക്കൽ: Keep the battery terminals clean and free of dirt or debris. Use a dry cloth to wipe the battery. Do not use solvents or harsh chemicals.
  • സംഭരണം: Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. Ideally, store batteries with a partial charge (around 50%) for extended periods.
  • ദീർഘകാല സംഭരണം: For long-term storage, recharge the battery every 3-6 months to maintain its health.

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ബാറ്ററി ചാർജ് ചെയ്യുന്നില്ലCharger not plugged in; faulty charger; battery too hot/cold; poor connection.Ensure charger is properly connected to power and battery. Check charger for damage. Allow battery to reach room temperature. Clean battery terminals.
ചാർജ്ജ് ചെയ്ത ബാറ്ററിയിൽ ഉപകരണം പ്രവർത്തിക്കുന്നില്ല.Battery not fully inserted; tool malfunction; battery fault.Ensure battery is securely clicked into place. Test battery with another compatible tool or charger. If issue persists, contact support.
കുറഞ്ഞ റൺ സമയംBattery nearing end of life; operating in extreme conditions; heavy load.Ensure battery is fully charged. Avoid continuous heavy-duty use. Consider replacing the battery if it's old.

8 സ്പെസിഫിക്കേഷനുകൾ

  • മോഡൽ: HT Charge 20V Max Lithium-Ion Battery 1.5 Ah
  • വാല്യംtage: 20V പരമാവധി
  • ശേഷി: 1.5 ആഹ്
  • ബാറ്ററി തരം: ലിഥിയം-അയൺ
  • ഉൽപ്പന്ന അളവുകൾ: 6 x 6 x 6 ഇഞ്ച്
  • നിർമ്മാതാവ്: Hyper Tough

9. വാറൻ്റിയും പിന്തുണയും

This Hyper Tough battery is covered by a limited warranty against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Hyper Tough website. For technical support or service inquiries, please contact Hyper Tough customer service.

അനുബന്ധ രേഖകൾ - HT Charge 20V Max Lithium-Ion Battery 1.5 Ah

പ്രീview ഹൈപ്പർ ടഫ് 20V മാക്സ് കോർഡ്‌ലെസ് റെസിപ്രോക്കേറ്റിംഗ് സോ ഇൻസ്ട്രക്ഷൻ മാനുവൽ - AQ80002G
ഹൈപ്പർ ടഫ് 20V മാക്സ് എച്ച്ടി ചാർജ് ലിഥിയം-അയൺ കോർഡ്‌ലെസ് റെസിപ്രോക്കേറ്റിംഗ് സോയുടെ (മോഡൽ AQ80002G) സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ, പ്രവർത്തനം, അറ്റകുറ്റപ്പണികൾ, ട്രബിൾഷൂട്ടിംഗ്, സ്പെസിഫിക്കേഷനുകൾ എന്നിവ ഉൾക്കൊള്ളുന്ന സമഗ്രമായ നിർദ്ദേശ മാനുവൽ.
പ്രീview ഹൈപ്പർ ടഫ് 20V MAX ലിഥിയം-അയൺ കോർഡ്‌ലെസ് ഡ്രിൽ/ഡ്രൈവർ AQ75034G യൂസർ മാനുവൽ
ഹൈപ്പർ ടഫ് 20V MAX ലിഥിയം-അയൺ കോർഡ്‌ലെസ് ഡ്രിൽ/ഡ്രൈവറിനായുള്ള (മോഡൽ AQ75034G) സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സുരക്ഷ, പ്രവർത്തനം, സാങ്കേതിക സവിശേഷതകൾ, ട്രബിൾഷൂട്ടിംഗ്, വാറന്റി വിവരങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview Hyper Tough AQ75034G 20V MAX Cordless Drill-Driver Instruction Manual and Warranty
Comprehensive instruction manual and warranty information for the Hyper Tough AQ75034G 20V MAX Cordless Drill-Driver, covering safety, operation, maintenance, and specifications.
പ്രീview Hyper Tough 8.0V Max Cordless Rotary Tool Instruction Manual
This manual provides comprehensive instructions for the Hyper Tough 8.0V Max Lithium-ion Cordless Rotary Tool, covering safety guidelines, operation, maintenance, accessory usage, and specifications. Learn how to safely operate and care for your rotary tool.
പ്രീview Hyper Tough 20V Max Cordless Chainsaw FAQ and Guide
Frequently asked questions and essential information about the Hyper Tough 20V Max Cordless 10-Inch Self-Lubricating Chainsaw, including setup, maintenance, and warranty.
പ്രീview Hyper Tough 20V 7.5-Inch Fan Operator's Manual
Comprehensive operator's manual for the Hyper Tough 20V 7.5-Inch Fan (Model C1005), detailing safety, operation, maintenance, and troubleshooting. Essential guide for safe and effective use.