WUBEN PL01 Pen Light Instruction Manual

1. ആമുഖം

The WUBEN PL01 is a compact, high-performance pen light designed for various applications including home use, outdoor activities, emergencies, and inspections. It features a bright 650-lumen output, dual power options (rechargeable battery or AAA batteries), IP68 waterproof rating, and a durable aluminum alloy construction. This manual provides detailed instructions for its safe and effective use.

Image 1.1: The WUBEN PL01 Pen Light, showcasing its sleek design and compact size.

2. ബോക്സിൽ എന്താണുള്ളത്?

പാക്കേജ് തുറക്കുമ്പോൾ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• WUBEN PL01 Pen Light x 1
• Rechargeable Battery (pre-installed or separate) x 1
• ടൈപ്പ്-സി ചാർജിംഗ് കേബിൾ x 1
• ലാൻയാർഡ് x 1
• Spare O-rings x 2
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം) x 1

Image 2.1: Contents of the WUBEN PL01 package, including the pen light, charging cable, lanyard, and spare O-rings.

3. സജ്ജീകരണം

3.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The WUBEN PL01 supports two power sources: the included rechargeable battery or two standard AAA batteries (not included). Ensure correct polarity during installation.

1. ഫ്ലാഷ്‌ലൈറ്റിന്റെ ടെയിൽ ക്യാപ്പ് അഴിക്കുക.
2. Insert the rechargeable battery or two AAA batteries with the positive (+) end facing towards the head of the flashlight.
3. Securely re-screw the tail cap until it is fully tightened.

Image 3.1: Illustration of the dual power options for the WUBEN PL01, showing both the rechargeable battery and AAA battery configuration.

3.2 റീചാർജ് ചെയ്യാവുന്ന ബാറ്ററി ചാർജ് ചെയ്യുന്നു

The included rechargeable battery features a built-in USB-C charging port. The flashlight itself does not have an integrated charging port.

1. Unscrew the tail cap and remove the rechargeable battery from the flashlight.
2. Connect the provided USB-C charging cable directly to the charging port on the battery.
3. USB-C കേബിളിന്റെ മറ്റേ അറ്റം അനുയോജ്യമായ ഒരു USB പവർ സ്രോതസ്സുമായി ബന്ധിപ്പിക്കുക (ഉദാ: വാൾ അഡാപ്റ്റർ, കമ്പ്യൂട്ടർ USB പോർട്ട്).
4. A red indicator light on the battery signifies that it is charging.
5. ബാറ്ററി പൂർണ്ണമായി ചാർജ്ജ് ചെയ്യുമ്പോൾ ഇൻഡിക്കേറ്റർ ലൈറ്റ് പച്ചയായി മാറും.
6. Charging typically takes approximately 1.5 hours.
7. Once charged, reinsert the battery into the flashlight and secure the tail cap.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 പവർ ഓൺ/ഓഫ്

To turn the WUBEN PL01 on or off, perform a full press of the tail switch button.

4.2 മോഡ് സ്വിച്ചിംഗ്

With the light turned on, half-press the tail switch button to cycle through the available brightness modes in the following sequence:

• ചന്ദ്രൻ: 1 ല്യൂമെൻ
• താഴ്ന്നത്: 50 ല്യൂമെൻസ്
• ഇടത്തരം: 150 ല്യൂമെൻസ്
• ഉയർന്നത്: 650 ല്യൂമെൻസ്

The flashlight features a mode memory function, meaning it will activate in the last used brightness mode when turned on again.

Image 4.1: Diagram illustrating the tail switch operation for power on/off and mode cycling.

ചിത്രം 4.2: ഉദാamples of the WUBEN PL01's four brightness modes in various practical scenarios, from facial examination to night walking.

4.3 Dual-Direction Clip Usage

The WUBEN PL01 is equipped with a versatile two-way clip, allowing for secure attachment to various items for hands-free lighting.

• Pocket Carry: Attach the clip to a shirt pocket or pants pocket for easy access.
• Backpack Strap: Secure the flashlight to a backpack strap for illumination during hikes or walks.
• Cap Mount: Clip the flashlight to the brim of a cap to convert it into a temporary headlamp.

Image 4.3: Demonstrates the versatility of the dual-direction clip, showing the flashlight attached to a pocket, backpack strap, and cap.

5. പരിപാലനം

5.1 വൃത്തിയാക്കൽ

മികച്ച പ്രകടനവും രൂപഭംഗിയും നിലനിർത്താൻ:

• ഫ്ലാഷ്‌ലൈറ്റ് ബോഡി മൃദുവായ, ഡി ലൈറ്റ് ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉള്ള വസ്തുക്കൾ ഒഴിവാക്കുക.
• For the lens, use a clean, soft cloth specifically designed for optical surfaces.

5.2 O-ring Replacement

The PL01's IP68 waterproof rating relies on properly sealed O-rings. Periodically inspect them for any signs of wear, cracks, or damage.

• If O-rings appear damaged, replace them with the provided spare O-rings.
• Apply a thin layer of silicone grease to the O-rings to ensure a better seal and prevent drying.

5.3 ബാറ്ററി കെയർ

• If the flashlight will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
• For the rechargeable battery, recharge it every 3-6 months to maintain its overall lifespan and capacity.

Image 5.1: The WUBEN PL01's Type III hard-anodized aluminum body, highlighting its scratch, rust, and impact resistance.

Image 5.2: The WUBEN PL01 demonstrating its IP68 waterproof and 2-meter impact resistance, suitable for demanding environments.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your WUBEN PL01, please refer to the following common problems and solutions:

• ലൈറ്റ് ഓണാക്കുന്നില്ല:
  • Ensure the batteries are installed with correct polarity.
  • Check if the rechargeable battery is charged, or if AAA batteries are new.
  • Verify that the tail cap is fully tightened. A loose tail cap can prevent electrical contact.
  • Clean the battery contacts and the contact points inside the flashlight with a clean cloth.
• അപ്രതീക്ഷിതമായി പ്രകാശം മിന്നിമറയുകയോ മങ്ങുകയോ ചെയ്യുന്നു:
  • The battery level may be low. Recharge the included battery or replace AAA batteries.
  • ടെയിൽ ക്യാപ്പ് സുരക്ഷിതമായി മുറുക്കിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Clean battery contacts and internal contact points.
• Water ingress (if exposed to water):
  • Immediately turn off the flashlight and remove the batteries.
  • Inspect the O-rings for any damage, tears, or improper seating. Replace if necessary.
  • Ensure the tail cap was fully tightened before exposure to water.
  • Allow the flashlight to dry completely before reassembling and attempting to use it.

If the problem persists after attempting these solutions, please contact WUBEN customer support.

7 സ്പെസിഫിക്കേഷനുകൾ

Image 7.1: Diagram illustrating the internal components of the WUBEN PL01, focusing on the 315D LED emitter and optical system.

8. വാറൻ്റി വിവരങ്ങൾ

WUBEN products typically come with a manufacturer's warranty. For specific warranty terms, conditions, and registration details, please refer to the official WUBEN website or contact their customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

9. ഉപഭോക്തൃ പിന്തുണ

For further assistance, product inquiries, or technical support, please visit the official WUBEN website or contact their customer service department. You can often find FAQs, troubleshooting guides, and contact information on their webസൈറ്റ്.

Official WUBEN Store: WUBEN Store on Amazon