FIDECO M.2 NVMe SATA SSD Cloner Dock (Model M2082) Instruction Manual

ആമുഖം

This manual provides detailed instructions for the FIDECO M.2 NVMe SATA SSD Cloner Dock, Model M2082. It covers product features, setup, operation modes (data transfer and offline cloning), maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

ഉൽപ്പന്ന സവിശേഷതകൾ

• Supported SSDs: Compatible with M.2 PCIe NVMe SSDs (M-Key or M+B Key) and M.2 SATA SSDs (M+B Key). Supports M.2 SSD sizes: 2230, 2242, 2260, 2280, 22110.
• High Transfer Speed: Utilizes USB 3.2 Gen 2x2 standard with UASP support, offering theoretical speeds up to 20Gbps.
• ഓഫ്‌ലൈൻ ക്ലോൺ പ്രവർത്തനം: Enables direct SSD cloning without a computer connection.
• Foldable Cooling Fan: Integrated fan helps maintain optimal SSD temperatures, extending lifespan.
• യൂണിവേഴ്സൽ കണക്റ്റിവിറ്റി: Includes a USB-C to USB-C/A cable for broad compatibility with desktops and laptops.
• പ്ലഗ് ആൻഡ് പ്ലേ: No driver installation required for Windows, Mac OS, and Linux systems.

പാക്കേജ് ഉള്ളടക്കം

• FIDECO M.2 NVMe SATA SSD Cloner Dock (Model M2082)
• USB-C മുതൽ USB-C/A കേബിൾ വരെ
• പവർ അഡാപ്റ്റർ
• ഉപയോക്തൃ മാനുവൽ

ഉപകരണ ലേഔട്ട്

Familiarize yourself with the ports and indicators on the cloner dock.

ചിത്രം: കഴിഞ്ഞുview of the FIDECO M.2 NVMe SATA SSD Cloner Dock, highlighting its various ports, buttons, and LED indicators for Source, Target, PC mode, Power, Clone status, and clone progress (25%, 50%, 75%, 100%). The back panel shows the Power Switch, USB-C port, DC 5V power port, and Fan Switch.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. പവർ കണക്ഷൻ: Connect the provided power adapter to the DC 5V port on the cloner dock and plug it into a power outlet.
2. SSD Insertion:
   • Ensure the cloner dock is powered off.
   • Carefully insert your M.2 NVMe or SATA SSDs into the designated 'Source' (S1) and 'Target' (S2) slots. Ensure they are fully seated.
   

   ചിത്രം: This diagram illustrates the types of M.2 SSDs supported by the dock, including NVMe (M-Key and M+B Key) and SATA (M+B Key), along with compatible physical sizes ranging from 2230 to 22110.
   

   ചിത്രം: This image demonstrates correct SSD configurations: two NVMe SSDs or two SATA SSDs. It explicitly warns against mixing NVMe and SATA SSDs simultaneously in the dock.

3. ഫാൻ പ്രവർത്തനം: The foldable cooling fan can be turned on or off using the fan switch on the back panel. It is recommended to keep the fan on during operation to prevent overheating.
4. Connectivity (for Data Transfer Mode): If using the dock for data transfer to a computer, connect the USB-C to USB-C/A cable from the dock's USB-C port to your computer.


ചിത്രം: This image illustrates the dual compatibility of the FIDECO dock, showing connections to both Type-C and Type-A ports. It highlights that a USB-C connection can achieve 20Gbps, while a USB-A connection supports up to 10Gbps.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

A. Data Transfer Mode (PC Mode)

1. Ensure the cloner dock is connected to your computer via the USB-C cable.
2. Insert one or two compatible M.2 SSDs into the 'Source' (S1) and/or 'Target' (S2) slots.
3. Turn on the power switch. The 'PC' blue light will illuminate, indicating the dock is in data transfer mode.
4. Your computer should recognize the SSD(s) as external drives. You can now transfer data to and from the SSDs.
5. New SSD Initialization: For new SSDs, they must be initialized and formatted before they can be recognized by your computer. Refer to the video below for detailed instructions.

B. Offline Clone Mode

The offline clone function allows you to duplicate an SSD without connecting to a computer.

1. തയ്യാറാക്കൽ:
   • Ensure the cloner dock is disconnected from any computer.
   • Insert the source SSD into the 'Source' (S1) slot.
   • Insert the target SSD into the 'Target' (S2) slot.
   • പ്രധാനപ്പെട്ടത്: The target SSD's capacity must be equal to or larger than the source SSD's capacity. Verify this in your computer's 'Disk Management' before cloning.
   • പവർ സ്വിച്ച് ഓണാക്കുക.
2. ഇനിഷ്യേറ്റ് ക്ലോൺ: Press and hold the 'Clone' button for 5 seconds until the first blue light (25%) begins to flash. This indicates the cloning process has started.
3. പുരോഗതി നിരീക്ഷിക്കുക: The four blue LED indicators (25%, 50%, 75%, 100%) will illuminate sequentially to show the cloning progress.
4. പൂർത്തീകരണം: Once all four blue lights are steadily lit, the cloning process is complete.

ചിത്രം: This image demonstrates the offline cloning process, showing the source (S1) and target (S2) SSDs inserted. It emphasizes the 20Gbps cloning speed and the critical requirement that the target SSD's capacity must be equal to or larger than the source SSD's capacity. Instructions for initiating the clone by holding the button are also included.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the exterior of the device. Avoid liquid cleaners or solvents.
• സംഭരണം: Store the cloner dock in a cool, dry place away from direct sunlight and extreme temperatures.
• ഫാൻ കെയർ: Periodically check the cooling fan for dust accumulation and gently clean it to ensure proper airflow.
• SSD Handling: Always handle SSDs by their edges to avoid touching the connectors or components.

ചിത്രം: This image highlights the foldable cooling fan feature of the FIDECO dock, showing it in operation at 2500rpm to effectively cool the SSDs during use, which helps prolong their lifespan.

ട്രബിൾഷൂട്ടിംഗ്

• SSD തിരിച്ചറിഞ്ഞിട്ടില്ല:
  • Ensure the SSD is correctly inserted into the slot.
  • For new SSDs, they need to be initialized and formatted in your operating system's Disk Management utility. Refer to the initialization video in the Operating Instructions section.
  • Verify that the USB cable is securely connected to both the dock and the computer.
  • If using both slots, ensure you are not mixing NVMe and SATA SSDs simultaneously for data transfer, as only SSD S1 might be recognized.
• Offline Clone Failure (4 blue lights flashing):
  • The target SSD's capacity must be equal to or larger than the source SSD's capacity. Check this in Windows "Disk Management" or Mac "Disk Utility" before attempting to clone.
  • Ensure the dock is disconnected from any computer during offline cloning.
  • Verify that both SSDs are securely inserted.
• Slow Transfer Speed:
  • Ensure your computer's USB port supports USB 3.2 Gen 2x2 for maximum 20Gbps speed. USB-A ports typically support up to 10Gbps.
  • Confirm the USB cable used is rated for the desired speed.
• അമിത ചൂടാക്കൽ: Ensure the foldable cooling fan is turned on during extended use or high-speed operations.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

FIDECO offers firmware updates and technical support for this product. For any questions or assistance, please contact us at സപ്പോർട്ട്@fideco.cn.