Wattcycle 12V 100Ah Starting LiFePO4 Battery

വാട്ട്സൈക്കിൾ 12V 100Ah ഡ്യുവൽ പർപ്പസ് മറൈൻ ക്രാങ്കിംഗ് LiFePO4 ലിഥിയം ബാറ്ററി ഇൻസ്ട്രക്ഷൻ മാനുവൽ

Model: 12V 100Ah Starting LiFePO4 Battery

ബ്രാൻഡ്: വാട്ട്സൈക്കിൾ

1. ആമുഖം

This manual provides essential information for the safe and efficient use of your Wattcycle 12V 100Ah Dual Purpose Marine Cranking LiFePO4 Lithium Battery. This battery is engineered to provide both high cranking power for engine starting and reliable deep cycle energy for various marine and off-grid applications. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your battery.

Wattcycle 12V 100Ah Dual Purpose LiFePO4 Lithium Battery with Bluetooth and Self-Heating

Figure 1: Wattcycle 12V 100Ah Dual Purpose LiFePO4 Lithium Battery

2. ഉൽപ്പന്നം കഴിഞ്ഞുview ഫീച്ചറുകളും

The Wattcycle 12V 100Ah Dual Purpose LiFePO4 battery combines robust cranking capabilities with deep cycle reliability, making it suitable for a wide range of applications. Key features include:

  • Dual-Mode Functionality: Provides 1200CCA (Cold Cranking Amps) for engine starting and 1500MCA (Marine Cranking Amps) for marine engines, alongside deep cycle power for accessories.
  • ഇന്റഗ്രേറ്റഡ് ബാറ്ററി മാനേജ്മെന്റ് സിസ്റ്റം (BMS): A 200A BMS protects against overcharge, over-discharge, over-current, short-circuit, and extreme temperatures, ensuring safety and extending battery life.
  • ബ്ലൂടൂത്ത് 5.0 കണക്റ്റിവിറ്റി: Monitor battery status, voltage, current, temperature, and more via a dedicated smartphone application.
  • സ്വയം ചൂടാക്കൽ പ്രവർത്തനം: Automatically activates when temperatures drop below 0°C (32°F) and warms the battery to 5°C (41°F) for optimal charging and discharge performance in cold conditions.
  • IP67 വാട്ടർപ്രൂഫ് റേറ്റിംഗ്: Provides protection against dust and water immersion up to 1 meter for 30 minutes.
  • EV Grade A+ Cells: Utilizes high-quality LiFePO4 cells for superior performance and durability.
  • Forced Start Button: Allows for manual override to initiate battery function in certain low-voltagഇ സാഹചര്യങ്ങൾ.
  • ലോംഗ് സൈക്കിൾ ലൈഫ്: Offers over 6,000 deep cycles at 80% Depth of Discharge (DoD).
  • വികസിപ്പിക്കാവുന്ന സിസ്റ്റം: Can be connected in series or parallel, supporting systems up to 48V 400Ah (16 units).
Key features of Wattcycle 12V 100Ah battery including 200A BMS, IP67 waterproof, EV Grade A+ cells, self-heating, and force start button

ചിത്രം 2: ഓവർview of integrated features

3 സുരക്ഷാ വിവരങ്ങൾ

Always adhere to the following safety guidelines when handling, installing, or operating the battery:

  • സുരക്ഷാ ഗ്ലാസുകളും ഇൻസുലേറ്റഡ് കയ്യുറകളും ഉൾപ്പെടെ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക.
  • ബാറ്ററി ടെർമിനലുകൾ ഷോർട്ട് സർക്യൂട്ട് ചെയ്യരുത്.
  • ബാറ്ററി ഡിസ്അസംബ്ലിംഗ് ചെയ്യുകയോ, പഞ്ചർ ചെയ്യുകയോ, പരിഷ്കരിക്കുകയോ ചെയ്യരുത്.
  • തുറന്ന തീജ്വാലകൾ, താപ സ്രോതസ്സുകൾ, കത്തുന്ന വസ്തുക്കൾ എന്നിവയിൽ നിന്ന് ബാറ്ററി അകറ്റി നിർത്തുക.
  • ചാർജ് ചെയ്യുമ്പോഴും പ്രവർത്തിപ്പിക്കുമ്പോഴും ശരിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.
  • LiFePO4 ബാറ്ററികൾക്കായി രൂപകൽപ്പന ചെയ്ത അനുയോജ്യമായ ചാർജറുകൾ മാത്രം ഉപയോഗിക്കുക.
  • ബാറ്ററി താഴെയിടുകയോ ഗുരുതരമായ ആഘാതങ്ങൾക്ക് വിധേയമാക്കുകയോ ചെയ്യുന്നത് ഒഴിവാക്കുക.
  • In case of fire, use a Class D fire extinguisher. Water can exacerbate lithium battery fires.
  • പ്രാദേശിക ചട്ടങ്ങൾ അനുസരിച്ച് ബാറ്ററി കളയുക.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1 അൺപാക്കിംഗ്

Upon receiving your Wattcycle battery, carefully inspect the packaging for any signs of damage. The package should contain:

  • 1x Wattcycle 12V 100Ah Dual Purpose Starting LiFePO4 Battery
  • ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
  • Terminal bolts and washers

4.2 ഭൗതിക അളവുകളും ഭാരവും

The battery measures approximately 13.9 x 7.3 x 6.9 inches (35.3 x 18.5 x 17.5 cm) and weighs approximately 24.2 pounds (10.9 kg). This lighter weight and compact size offer significant advantages over traditional lead-acid batteries.

Diagram showing the dimensions and weight of the Wattcycle 12V 100Ah battery

Figure 3: Battery dimensions and weight

4.3 മൗണ്ടിംഗും കണക്ഷനും

Mount the battery in a secure, dry, and well-ventilated location. Ensure the terminals are easily accessible for connection. The battery features dual terminals for versatile connectivity. Connect the positive (+) terminal to the positive lead of your system and the negative (-) terminal to the negative lead. Use appropriate gauge wiring and ensure all connections are tight and secure to prevent arcing or overheating.

4.4 സിസ്റ്റം എക്സ്പാൻഷൻ

The Wattcycle 12V 100Ah battery can be expanded for larger power requirements. It supports connecting up to 16 units in series or parallel configurations, allowing for systems up to 48V 400Ah. Consult a qualified electrician or refer to advanced wiring diagrams for complex multi-battery setups.

Comparison showing space and weight savings of Wattcycle LiFePO4 batteries over lead-acid batteries

Figure 4: Space and weight efficiency compared to lead-acid

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 ബ്ലൂടൂത്ത് മോണിറ്ററിംഗ്

Download the Wattcycle app from your smartphone's app store. Once installed, enable Bluetooth on your device and open the app. The app will detect nearby Wattcycle batteries. Select your battery to connect and monitor real-time data such as voltage, current, temperature, state of charge, and cycle count. The app also allows for certain parameter adjustments.

Screenshots of the Wattcycle Bluetooth app showing connect, monitor, and switch functions

Figure 5: Bluetooth app interface for monitoring

5.2 Self-Heating Function

The battery features an automatic self-heating function. When the internal temperature drops below 0°C (32°F), the heating element activates to warm the battery to 5°C (41°F). This ensures safe charging and optimal performance even in cold environments. The heating function consumes a small amount of battery power.

Diagram illustrating the self-heating function of the battery in cold conditions

Figure 6: Self-heating mechanism in action

5.3 Forced Start Button

In situations where the battery's voltage is too low to initiate a normal start, the integrated forced start button can be used. Pressing this button will temporarily bypass certain BMS protections to allow for a minimal discharge, enabling you to start an engine or power essential devices. Use this feature sparingly and recharge the battery immediately after use.

Illustration of the force start button on the battery

Figure 7: Location of the Force Start button

6. ചാർജിംഗ്

The Wattcycle 12V 100Ah LiFePO4 battery can be charged using various methods. Always ensure your charging source is compatible with LiFePO4 batteries and provides the correct voltagഇയും കറൻ്റും.

  • സമർപ്പിത LiFePO4 ചാർജർ: A 14.6V 40A AC-DC charger can fully charge the battery in approximately 2.5 hours.
  • Outboard Alternator: The battery supports charging from an outboard alternator with a maximum charging current of 100A.
  • ജനറേറ്റർ: Can be charged via a generator connected to a compatible 14.6V 40A AC-DC charger.
  • Solar Panel + MPPT Controller: A solar panel system with an MPPT (Maximum Power Point Tracking) charge controller (e.g., 600W or more) can charge the battery in approximately one sunny day.
Diagram showing various charging methods: dedicated charger, outboard alternator, generator, and solar panel with MPPT

Figure 8: Recommended charging methods

7. പരിപാലനം

LiFePO4 batteries require minimal maintenance compared to lead-acid batteries, but following these guidelines will ensure optimal performance and lifespan:

  • പതിവ് പരിശോധന: Periodically check battery terminals for corrosion or loose connections. Clean terminals with a wire brush if necessary and ensure they are tight.
  • വൃത്തിയായും ഉണങ്ങിയും സൂക്ഷിക്കുക: Wipe down the battery casinപരസ്യത്തോടുകൂടിയ ജിamp cloth to remove dirt and debris. Ensure the battery remains dry.
  • സംഭരണം: If storing the battery for an extended period, ensure it is charged to approximately 50-70% State of Charge (SoC) and stored in a cool, dry place. Avoid storing a fully discharged battery.
  • ആഴത്തിലുള്ള ഡിസ്ചാർജ് ഒഴിവാക്കുക: While the BMS protects against over-discharge, consistently running the battery to very low levels can reduce its overall lifespan.
  • താപനില മാനേജ്മെൻ്റ്: Although the battery has a self-heating function, avoid exposing it to extreme temperatures outside its operating range for prolonged periods.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Wattcycle battery, refer to the following common problems and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ബാറ്ററി ചാർജ് ചെയ്യുന്നില്ലCharger not connected, charger fault, battery temperature too low/high, BMS protection activated.Check charger connection and functionality. Ensure battery temperature is within operating range (self-heating should activate if cold). Check app for BMS fault codes.
പവർ ഔട്ട്പുട്ട് ഇല്ലBattery discharged, loose connections, BMS protection activated, internal fault.Check battery SoC via app. Inspect all cable connections. Use the forced start button if applicable. If issue persists, contact support.
ബ്ലൂടൂത്ത് കണക്ഷൻ പ്രശ്നങ്ങൾBluetooth disabled on phone, app not updated, too far from battery.Ensure phone Bluetooth is on. Update Wattcycle app. Move closer to the battery. Restart phone and battery (if possible).
Self-heating not activatingTemperature not below threshold, internal fault.Verify ambient temperature is below 0°C (32°F). Check app for heating status. If not working, contact support.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Wattcycle customer support.

9 സ്പെസിഫിക്കേഷനുകൾ

സ്പെസിഫിക്കേഷൻമൂല്യം
ബ്രാൻഡ്വാട്ട്സൈക്കിൾ
മോഡൽ12V 100Ah Starting LiFePO4 Battery
വാല്യംtage12 വോൾട്ട്
ബാറ്ററി ശേഷി100 Amp മണിക്കൂർ (ആഹ്)
ബാറ്ററി സെൽ കോമ്പോസിഷൻലിഥിയം അയൺ ഫോസ്ഫേറ്റ് (LiFePO4)
തണുത്ത ക്രാങ്കിംഗ് Amps (CCA)1200A (6 seconds), 900A (30 seconds)
മറൈൻ ക്രാങ്കിംഗ് Ampഎസ് (എംസിഎ)1500എ
ഊർജ്ജം1280 Wh
പരമാവധി പവർ ഔട്ട്പുട്ട്2560 W
അന്തർനിർമ്മിത ബിഎംഎസ്200എ
സൈക്കിൾ ജീവിതം6,000+ cycles at 80% DoD
Self-Heating ActivationBelow 0°C (32°F), heats to 5°C (41°F)
വാട്ടർപ്രൂഫ് റേറ്റിംഗ്IP67
ഇനത്തിൻ്റെ ഭാരം24.2 പൗണ്ട് (10.9 കി.ഗ്രാം)
പാക്കേജ് അളവുകൾ13.94 x 7.36 x 6.93 ഇഞ്ച് (35.4 x 18.7 x 17.6 സെ.മീ)
ശുപാർശ ചെയ്യുന്ന ഉപയോഗങ്ങൾTrolling Motor, Boat, RV, Solar Off-Grid
Table comparing cold cranking power of Wattcycle battery to AGM and lead-acid batteries

Figure 9: Cold Cranking Power comparison

10. വാറൻ്റിയും പിന്തുണയും

10.1 വാറൻ്റി വിവരങ്ങൾ

The Wattcycle 12V 100Ah Dual Purpose Marine Cranking LiFePO4 Lithium Battery is backed by a 5 വർഷത്തെ ആശങ്ക രഹിത വാറൻ്റി. This warranty covers manufacturing defects and ensures free replacement in case of such issues. Please retain your proof of purchase for warranty claims.

10.2 ഉപഭോക്തൃ പിന്തുണ

Wattcycle provides 24/7 U.S.-based customer support. For any questions regarding installation, operation, troubleshooting, or warranty claims, please contact our support team. Our dedicated team is ready to assist you with returns, technical assistance, or setup help.

Contact information can be found on the official Wattcycle webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങൽ പ്ലാറ്റ്‌ഫോം വഴി.

അനുബന്ധ രേഖകൾ - 12V 100Ah Starting LiFePO4 Battery

പ്രീview വാട്ട് സൈക്കിൾ 12V LiFePO4 ബാറ്ററികൾ: സ്പെസിഫിക്കേഷനുകളും ഉപയോഗ ഗൈഡും
50Ah മുതൽ 400Ah വരെയുള്ള മോഡലുകൾ ഉൾപ്പെടെ, വാട്ട്സൈക്കിളിന്റെ 12V LiFePO4 ബാറ്ററി സീരീസിനായുള്ള വിശദമായ സ്പെസിഫിക്കേഷനുകൾ, സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ, കണക്ഷൻ വിവരങ്ങൾ.
പ്രീview വാട്ട് സൈക്കിൾ 12V LiFePO4 ഡീപ് സൈക്കിൾ ബാറ്ററി യൂസർ മാനുവൽ
വാട്ട്‌സൈക്കിൾ 12V LiFePO4 ഡീപ് സൈക്കിൾ ബാറ്ററികൾക്കായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സവിശേഷതകൾ, സ്പെസിഫിക്കേഷനുകൾ, ഇൻസ്റ്റാളേഷൻ, ചാർജിംഗ്, BMS ഫംഗ്‌ഷനുകൾ, വാറന്റി, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു. വിശദമായ ഉൽപ്പന്ന വിവരങ്ങളും മികച്ച രീതികളും ഉൾപ്പെടുന്നു.
പ്രീview വാട്ട് സൈക്കിൾ 12V സീരീസ് LiFePO4 ഡീപ് സൈക്കിൾ ബാറ്ററി യൂസർ മാനുവൽ
വാട്ട്‌സൈക്കിൾ 12V സീരീസ് LiFePO4 ഡീപ് സൈക്കിൾ ബാറ്ററികൾക്കായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സവിശേഷതകൾ, സ്പെസിഫിക്കേഷനുകൾ, ഇൻസ്റ്റാളേഷൻ, ചാർജിംഗ്, BMS ഫംഗ്‌ഷനുകൾ, ആപ്ലിക്കേഷനുകൾ, പതിവുചോദ്യങ്ങൾ, വാറന്റി എന്നിവ ഉൾക്കൊള്ളുന്നു. വിശദമായ സാങ്കേതിക ഡാറ്റയും സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങളും ഉൾപ്പെടുന്നു.
പ്രീview വാട്ട്സൈക്കിൾ LiFePO4 ഡ്യുവൽ പർപ്പസ് ബാറ്ററി യൂസർ മാനുവൽ
WattCycle 12V100AH ​​DU, 24V150AH DU LiFePO4 ഡ്യുവൽ-പർപ്പസ് ഡീപ് സൈക്കിൾ ബാറ്ററികൾക്കുള്ള ഉപയോക്തൃ മാനുവൽ. ഉൽപ്പന്നം മുഴുവൻ ഉൾക്കൊള്ളുന്നു.view, സ്പെസിഫിക്കേഷനുകൾ, ചാർജിംഗ്, സുരക്ഷ, ഇൻസ്റ്റാളേഷൻ, ട്രബിൾഷൂട്ടിംഗ്.
പ്രീview ബ്ലൂടൂത്ത് ആപ്പ് യൂസർ മാനുവൽ ഉള്ള വാട്ട് സൈക്കിൾ 12V 100Ah LiFePO4 ബാറ്ററി
WattCycle 12V 100Ah LiFePO4 ബാറ്ററിയുടെ ഉപയോക്തൃ മാനുവൽ, സംയോജിത ബ്ലൂടൂത്ത് ആപ്ലിക്കേഷൻ വഴി അതിന്റെ സവിശേഷതകൾ, പ്രവർത്തനം, മാനേജ്മെന്റ് എന്നിവ ഉൾക്കൊള്ളുന്നു. ഒപ്റ്റിമൽ പ്രകടനത്തിനായി ഇൻസ്റ്റാളേഷൻ, ഉപയോഗം, ട്രബിൾഷൂട്ടിംഗ് എന്നിവയെക്കുറിച്ചുള്ള മാർഗ്ഗനിർദ്ദേശം നൽകുന്നു.
പ്രീview വാട്ട് സൈക്കിൾ 12V സീരീസ് LiFePO4 ഡീപ് സൈക്കിൾ ബാറ്ററി യൂസർ മാനുവൽ
വാട്ട്‌സൈക്കിൾ 12V സീരീസ് LiFePO4 ഡീപ് സൈക്കിൾ ബാറ്ററികൾക്കായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സവിശേഷതകൾ, സ്പെസിഫിക്കേഷനുകൾ, ഇൻസ്റ്റാളേഷൻ, ചാർജിംഗ്, BMS ഫംഗ്‌ഷനുകൾ, പതിവുചോദ്യങ്ങൾ, വാറന്റി എന്നിവ ഉൾക്കൊള്ളുന്നു.