1. ഉൽപ്പന്നം കഴിഞ്ഞുview
This manual provides essential information for the proper installation, operation, and maintenance of the GGM Gastro GSHK920 BRMHK4300 Rubber Extraction Strips. These strips are designed as replacement parts for the BRMHK4300 scrubber dryer machine.
The product is manufactured according to strict hygiene and safety guidelines, complies with CE marking directives, and meets European food standards.
Figure 1: GGM Gastro Rubber Extraction Strips. This image displays two blue rubber strips, one with multiple cutouts along its length and another simpler, straight strip, both designed for extraction purposes.
2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The GGM Gastro GSHK920 BRMHK4300 Rubber Extraction Strips are replacement components for the BRMHK4300 scrubber dryer machine. Installation should be performed by qualified personnel following the specific instructions provided in the scrubber dryer machine's main manual.
- സുരക്ഷ ആദ്യം: Ensure the scrubber dryer machine is powered off and disconnected from the main power supply before beginning any installation or maintenance.
- Access the Suction Unit: Locate the suction unit or squeegee assembly on your BRMHK4300 scrubber dryer machine. Refer to your machine's manual for precise access instructions.
- Remove Old Strips: Carefully detach the worn or damaged rubber extraction strips from the squeegee assembly. Note their orientation and position for correct replacement.
- അസംബ്ലി വൃത്തിയാക്കുക: Clean any debris or residue from the squeegee assembly before installing new strips.
- Install New Strips: Position the new GGM Gastro rubber extraction strips into the squeegee assembly. Ensure they are securely fastened and correctly aligned to ensure optimal water collection. The effective extraction length of the strips is 920 mm.
- ഇൻസ്റ്റാളേഷൻ പരിശോധിക്കുക: After installation, visually inspect the strips to ensure they are properly seated and there are no gaps or misalignments.
Figure 2: GGM Gastro Rubber Extraction Strips with dimensions. This image shows the two blue rubber strips, highlighting their overall length of 1015mm, which includes the mounting points, with the effective extraction length being 920mm as per product description.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
These rubber extraction strips are passive components of the BRMHK4300 scrubber dryer machine's squeegee system. Their operation is directly tied to the proper functioning of the scrubber dryer machine itself.
Once correctly installed, the strips work by creating a vacuum seal with the floor, allowing the machine's suction motor to effectively collect water and cleaning solution, leaving the floor dry.
- മെഷീൻ പ്രവർത്തനം: Operate your BRMHK4300 scrubber dryer machine according to its specific user manual.
- Squeegee Pressure: Ensure the squeegee assembly, including these strips, is set to the correct pressure as recommended by the scrubber dryer machine manufacturer for optimal water pickup.
- പതിവ് പരിശോധനകൾ: Periodically check the strips during operation for any signs of wear, damage, or improper contact with the floor.
4. പരിപാലനം
Regular maintenance of the rubber extraction strips is crucial for maintaining the efficiency of your scrubber dryer machine and extending the lifespan of the strips.
- പ്രതിദിന ശുചീകരണം: After each use, remove the strips and rinse them thoroughly with clean water to remove any dirt, debris, or chemical residues.
- പരിശോധന: Regularly inspect the strips for cuts, tears, excessive wear, or deformation. Worn strips will reduce water pickup efficiency.
- സംഭരണം: Store spare strips flat and in a cool, dry place away from direct sunlight or harsh chemicals to prevent material degradation.
- മാറ്റിസ്ഥാപിക്കൽ: Replace strips when they show significant signs of wear, such as rounded edges, nicks, or reduced flexibility, as this will impair their performance.
5. പ്രശ്നപരിഹാരം
If your scrubber dryer machine is not effectively picking up water, the rubber extraction strips may be a contributing factor. Consider the following troubleshooting steps:
- Poor Water Pickup:
- വസ്ത്രങ്ങൾ പരിശോധിക്കുക: Inspect the strips for excessive wear, especially along the edges that contact the floor. Replace if worn.
- തെറ്റായ ഇൻസ്റ്റാളേഷൻ: Ensure the strips are correctly installed and securely fastened in the squeegee assembly.
- തടസ്സങ്ങൾ: Check for any debris lodged between the strips or in the squeegee channel.
- Squeegee Adjustment: Verify that the squeegee assembly is properly adjusted for optimal contact pressure with the floor. Refer to your machine's manual.
- സ്ട്രീക്കിംഗ്:
- Dirty Strips: Clean the strips thoroughly to remove any residue that might be causing streaks.
- Damaged Strips: Inspect for small nicks or cuts that could be leaving water trails. Replace if damaged.
If issues persist after checking the strips, consult the main user manual for your BRMHK4300 scrubber dryer machine or contact GGM Gastro technical support.
6 സ്പെസിഫിക്കേഷനുകൾ
| ഉൽപ്പന്നത്തിൻ്റെ പേര് | Rubber Extraction Strips |
| ബ്രാൻഡ് | ജിജിഎംജിഗാസ്ട്രോ |
| മോഡൽ നമ്പർ | GSHK920 |
| Compatible Machine Model | BRMHK4300 Scrubber Dryer Machine |
| Strip Length (Effective) | 920 മി.മീ |
| External Dimensions (Overall, W x D x H) | 1,015 mm x 47 mm x 5 mm (including mounting points) |
| മെറ്റീരിയൽ | റബ്ബർ |
| പാലിക്കൽ | CE Marking Directive, European Food Standards |
7. വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support regarding the GGM Gastro GSHK920 BRMHK4300 Rubber Extraction Strips, please refer to the documentation provided with your original BRMHK4300 scrubber dryer machine or contact GGM Gastro directly.
സാധാരണയായി നിർമ്മാതാവിന്റെ ഔദ്യോഗിക വെബ്സൈറ്റിൽ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ നിങ്ങൾക്ക് കണ്ടെത്താൻ കഴിയും. webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ അംഗീകൃത ഡീലർ വഴി.
