WOBANE Dimmable LED Puck Lights (4 Pack) Instruction Manual

1. ആമുഖം

Thank you for choosing WOBANE Dimmable LED Puck Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting system. These LED puck lights are designed for various indoor applications, including under cabinets, shelves, closets, and display cases, providing bright, warm white illumination with adjustable brightness.

Each puck light features 28 LEDs, delivering 175 lumens for a total system output of 700 lumens. The system operates on a safe 24V DC low voltage power supply and includes a convenient rotary dimmer switch for brightness control.

2 സുരക്ഷാ വിവരങ്ങൾ

• ഇൻഡോർ ഉപയോഗത്തിന് മാത്രം: This product is designed for indoor use. It is വെള്ളത്തെ പ്രതിരോധിക്കുന്നില്ല and should not be exposed to moisture or wet conditions.
• വൈദ്യുതി വിതരണം: Use only the provided ETL Listed 24V DC power adapter. Using an incompatible power supply may damage the product and pose a safety risk.
• ഇൻസ്റ്റലേഷൻ: Ensure the power is disconnected before installation or maintenance. Do not attempt to modify the product components.
• വെൻ്റിലേഷൻ: Ensure adequate ventilation around the power adapter to prevent overheating.
• കുട്ടികളും വളർത്തുമൃഗങ്ങളും: Keep all components, especially small parts and cables, out of reach of children and pets.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 4 x എൽഇഡി പക്ക് ലൈറ്റുകൾ
• 1 x Power Adapter (24V DC)
• 1 x റോട്ടറി ഡിമ്മർ സ്വിച്ച്
• കണക്ഷൻ കേബിളുകൾ
• കേബിൾ ക്ലിപ്പുകൾ
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

Figure 1: All components included in the WOBANE LED Puck Lights 4-pack kit.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The WOBANE LED Puck Lights are designed for easy installation using the included 3M adhesive tape. Follow these steps for a secure setup:

1. പ്ലാൻ ലേഔട്ട്: Determine the desired placement for each puck light and the dimmer switch. Ensure cables can reach all components.
2. ശുദ്ധമായ ഉപരിതലം: Thoroughly clean and dry the installation surface. Dust, grease, or moisture can reduce adhesive effectiveness.
3. Attach Puck Lights: Peel the protective film from the 3M adhesive on the back of each puck light. Press firmly onto the chosen surface for at least 30 seconds.
4. Connect Puck Lights: Connect the puck lights to each other using the provided connection cables. The system is designed for a tidy, linked connection.
5. Connect Dimmer Switch: Connect the dimmer switch into the main cable line.
6. പവർ അഡാപ്റ്റർ ബന്ധിപ്പിക്കുക: Plug the power adapter into the dimmer switch, then plug the adapter into a standard wall outlet.
7. സുരക്ഷിത കേബിളുകൾ: Use the included cable clips to neatly route and secure any excess cabling, ensuring a clean and organized installation.

Figure 2: Visual guide for puck light installation, including adhesive application and wiring exampലെസ്.

Figure 3: Connection diagram illustrating the wiring of puck lights, dimmer switch, and power adapter.

Figure 4: Illustration of the streamlined connection cable design for easy organization.

ചിത്രം 5: ഉദാamples of open wire and concealed installation techniques.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The WOBANE LED Puck Lights are controlled by a simple rotary dimmer switch:

• ഓൺ/ഓഫ് ചെയ്യുക: Rotate the knob clockwise until you hear a click to turn the lights on. Continue rotating clockwise to increase brightness. Rotate counter-clockwise to decrease brightness and turn off the lights (until you hear a click).
• തെളിച്ചം ക്രമീകരിക്കുക: Once the lights are on, rotate the knob clockwise to brighten the lights or counter-clockwise to dim them. The brightness is steplessly adjustable from 0% to 100%.

Figure 6: Close-up of the rotary dimmer switch for easy brightness adjustment.

Figure 7: Visual representation of dimming levels controlled by the rotary switch.

6. പരിപാലനം

To ensure the longevity and optimal performance of your WOBANE LED Puck Lights, follow these simple maintenance guidelines:

• വൃത്തിയാക്കൽ: Disconnect power before cleaning. Use a soft, dry cloth to wipe the puck lights and cables. Do not use abrasive cleaners, solvents, or excessive moisture.
• പരിശോധന: Periodically check cables and connections for any signs of damage or wear. If any damage is found, discontinue use and contact customer support.
• സംഭരണം: If storing the lights for an extended period, ensure they are clean, dry, and stored in a cool, dry place away from direct sunlight.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your WOBANE LED Puck Lights, refer to the following common troubleshooting steps:

• ലൈറ്റുകൾ ഓണാക്കുന്നില്ല:
  • പവർ അഡാപ്റ്റർ ഒരു വർക്കിംഗ് വാൾ ഔട്ട്‌ലെറ്റിൽ സുരക്ഷിതമായി പ്ലഗ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Check all cable connections between the puck lights, dimmer switch, and power adapter.
  • Confirm the dimmer switch is rotated clockwise past the 'off' click.
• മിന്നിമറയുകയോ മങ്ങുകയോ ചെയ്യുക:
  • തെളിച്ചം വർദ്ധിപ്പിക്കുന്നതിന് ഡിമ്മർ സ്വിച്ച് ക്രമീകരിക്കുക.
  • Ensure all connections are secure. Loose connections can cause inconsistent power.
• Individual Puck Light Not Working:
  • Check the connection specifically to the non-working puck light.
  • If other lights in the chain are working, the individual puck light may be faulty. Contact customer support.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

WOBANE products come with a limited warranty. For specific warranty details, claims, or technical support, please contact the seller or manufacturer directly through your purchase platform. Please have your order number and product model (CP01) available when contacting support.