SeeYing Turntable Vinyl Record Player User Manual

1. പായ്ക്ക് ചെയ്യലും പ്ലേസ്മെന്റും

Carefully remove all components from the packaging. Place the turntable on a flat, stable surface, away from speakers to minimize vibration feedback.

Image: The SeeYing Turntable SYB01 with its clear dust cover, showcasing the platter, tonearm, and controls. This is the main product view.

2. Platter and Belt Installation

1. ഡൈ-കാസ്റ്റ് അലുമിനിയം പ്ലാറ്റർ ടർടേബിൾ സ്പിൻഡിൽ വയ്ക്കുക.
2. Locate the rubber belt. Gently stretch the belt around the inner rim of the platter and hook it onto the motor pulley, which is visible through an opening in the platter.
3. തളികയുടെ മുകളിൽ സ്ലിപ്പ് പായ വയ്ക്കുക.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the turntable's die-cast aluminum platter, showing the rubber belt wrapped around its inner rim and connected to the motor pulley. This illustrates the belt drive system.

3. Tonearm and Cartridge Setup

The AT3600L Moving Magnetic Cartridge is pre-installed. You will need to balance the tonearm and set the tracking force.

1. ടോൺആം ബാലൻസ് ചെയ്യുക: Gently release the tonearm from its rest. Rotate the counterweight at the rear of the tonearm until the tonearm floats horizontally, parallel to the platter, without touching the surface.
2. ട്രാക്കിംഗ് ഫോഴ്‌സ് സജ്ജമാക്കുക: Once balanced, hold the counterweight steady and rotate the numbered ring on the counterweight to '0'. Then, rotate the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is reached. Refer to the cartridge specifications for the recommended tracking force (typically 2.5-3.5 grams for the AT3600L).
3. Adjust Anti-Skate: Set the anti-skate dial to match the tracking force you set. This helps prevent the stylus from skipping inwards.

ചിത്രം: വിശദമായ ഒരു ചിത്രം view of the tonearm's adjustable counterweight with numerical markings, the pitch control knob, and the anti-skate dial. This image highlights the precision adjustments for optimal playback.

Image: A close-up of the AT3600L Moving Magnetic Cartridge attached to the tonearm, positioned over a vinyl record. This shows the stylus and cartridge assembly.

4. ഓഡിയോ കണക്ഷനുകൾ

The turntable offers both Phono and Line output options, as well as a ground wire connection.

• ഫോൺ/ലൈൻ സ്വിച്ച്: On the rear panel, select "PHONO" if connecting to an amplifier with a dedicated phono input. Select "LINE" if connecting to an amplifier or active speakers with a standard auxiliary input.
• ആർസിഎ ഓഡിയോ ഔട്ട്പുട്ട്: Use the included RCA cables to connect the turntable's "AUDIO OUT" jacks (Red for Right, White for Left) to your ampലൈഫയർ അല്ലെങ്കിൽ സജീവ സ്പീക്കറുകൾ.
• ഗ്രൗണ്ട് വയർ: നിങ്ങളുടെ ടർടേബിളിൽ നിന്ന് ഗ്രൗണ്ട് ടെർമിനലിലേക്ക് ഗ്രൗണ്ട് വയർ ബന്ധിപ്പിക്കുക. ampഹമ് കുറയ്ക്കാൻ ലിഫയർ (ലഭ്യമെങ്കിൽ).

Image: The rear panel of the turntable, clearly labeled with the Phono-Line Out Switch (1), RCA Jacks (2) for audio output, and the BT Out Button (3) for Bluetooth connectivity. This illustrates the various connection options.

5. പവർ കണക്ഷൻ

Connect the DC12V 0.2A power cord to the turntable's power input and then plug it into a wall outlet.

6. പൊടി കവർ

Attach the detachable dust cover to the hinges on the back of the turntable. This protects the platter and tonearm from dust when not in use.

1. Power On/Off and Speed Selection

The turntable features a speed selector knob. Rotate this knob to select 33 1/3 RPM for LPs or 45 RPM for singles. Turning the knob to the "OFF" position powers down the unit.

Image: The SeeYing turntable positioned between two external speakers, highlighting its belt-drive system and 2-speed capability (33 1/3 or 45 RPM). This shows the turntable in an operational setup.

2. ഒരു റെക്കോർഡ് പ്ലേ ചെയ്യുന്നു

1. Place a record on the platter, ensuring it is centered. Use the 45 RPM adapter for records with larger center holes.
2. Select the correct speed (33 1/3 or 45 RPM).
3. Lift the tonearm from its rest using the cueing lever.
4. റെക്കോർഡിന്റെ ആവശ്യമുള്ള സ്റ്റാർട്ടിംഗ് ഗ്രൂവിന് മുകളിൽ ടോൺആം സ്ഥാപിക്കുക.
5. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record and playback will begin.
6. To stop playback, lift the tonearm using the cueing lever and return it to its rest.

3. പിച്ച് നിയന്ത്രണം

The pitch control knob allows for slight adjustments to the playback speed. Rotate the knob to increase or decrease the speed as desired.

4. Bluetooth Output

ബ്ലൂടൂത്ത് പ്രാപ്തമാക്കിയ സ്പീക്കറുകളിലേക്കോ ഹെഡ്‌ഫോണുകളിലേക്കോ വയർലെസ് ആയി ഓഡിയോ ട്രാൻസ്മിറ്റ് ചെയ്യാൻ ടേൺടേബിളിന് കഴിയും.

1. Ensure your Bluetooth receiving device (speaker, headphones) is in pairing mode.
2. Press the "BT Out" button on the rear panel of the turntable. The Bluetooth indicator light will flash, indicating it is searching for a device.
3. Once connected, the indicator light will remain solid. Audio will now play through your Bluetooth device.

Image: The SeeYing turntable shown alongside a wireless headphone and a wireless speaker, with a graphic indicating wireless signal transmission. This illustrates the Bluetooth output capability for connecting to external audio devices.

1. Cleaning the Stylus

Regularly clean the stylus using a soft brush designed for stylus cleaning. Brush gently from back to front to remove dust and debris. A dirty stylus can degrade sound quality and damage records.

2. Cleaning the Turntable Unit

Wipe the turntable's surface and dust cover with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp തുണി ഉപയോഗിക്കാം, തുടർന്ന് ഉണങ്ങിയ തുണി ഉപയോഗിക്കാം. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.

3. Record Care

Keep your vinyl records clean and free of dust. Store them vertically in their sleeves to prevent warping. Handle records by their edges to avoid transferring oils from your skin to the playing surface.