ആമുഖം
Thank you for choosing the Brio 130SS Series Bottom Load Water Cooler Dispenser. This appliance provides convenient access to hot, room temperature, and cold water from 5-gallon bottles. Designed for ease of use and safety, it features a bottom-loading design to eliminate heavy lifting, a child safety lock for hot water, and an empty bottle alert system. Please read this manual thoroughly before installation and use to ensure proper operation and maintenance.
പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
- ഇലക്ട്രിക്കൽ സുരക്ഷ: Always plug the dispenser into a grounded outlet. Do not use extension cords.
- ചൂടുവെള്ള അപകടം: The hot water dispenser can reach temperatures up to 194°F (90°C). Exercise extreme caution.
- കുട്ടികളുടെ സുരക്ഷ: Always engage the child safety lock when dispensing hot water, especially in households with children.
- പ്ലേസ്മെൻ്റ്: Place the dispenser on a flat, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
- പ്രാരംഭ സജ്ജീകരണം: After unpacking, allow the unit to stand upright for at least 24 hours before plugging it in and turning it on. This allows the compressor lubricants to settle.
- ജലവിതരണം: Use only potable water in 5-gallon bottles. Do not operate the hot or cold water functions without a water bottle installed to prevent dry heating.
സജ്ജമാക്കുക
- അൺപാക്കിംഗും പ്ലേസ്മെൻ്റും: Carefully remove the dispenser from its packaging. Place the unit on a firm, level floor surface. Ensure there is at least 4 inches of clearance from the back and sides of the unit to a wall for proper ventilation.
- Initial Stand Time: Allow the water cooler to stand upright for a minimum of 24 hours before plugging it into an electrical outlet.
- വാട്ടർ ബോട്ടിൽ ഇൻസ്റ്റാളേഷൻ:
Image: A person is shown easily sliding a 5-gallon water bottle into the bottom compartment of the water cooler, demonstrating the bottom-load design.
- ഡിസ്പെൻസറിന്റെ താഴത്തെ കാബിനറ്റ് വാതിൽ തുറക്കുക.
- Remove the cap from a new 5-gallon water bottle.
- Insert the probe assembly into the opening of the water bottle. Ensure the probe is fully inserted and the collar is securely seated on the bottle neck.
- Slide the water bottle into the bottom compartment and close the cabinet door.
- പവർ കണക്ഷൻ: Plug the power cord into a grounded 110-120V AC outlet.
- പ്രാരംഭ ജലപ്രവാഹം: Before turning on the heating and cooling switches, dispense water from all three taps (hot, room, cold) until water flows steadily. This primes the system and prevents dry heating.
- Activate Heating and Cooling: Locate the heating and cooling switches on the back of the unit. Flip them to the 'ON' position. The indicator lights on the front panel will illuminate.
Image: A visual guide illustrating the simple three-step process of setting up and using the Brio water cooler.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Brio 130SS dispenser offers three temperature options: hot, room, and cold water.
ചിത്രം: വിശദമായത് view of the control panel with LED indicators for hot, cold, and empty bottle, highlighting the child safety lock.
- തണുത്ത വെള്ളം വിതരണം ചെയ്യുന്നു: Place your cup under the cold water tap. Press the cold water button (usually marked with a snowflake or blue indicator). Release the button when your cup is full.
- മുറിയിലെ താപനിലയിലുള്ള വെള്ളം വിതരണം ചെയ്യുന്നു: Place your cup under the room temperature water tap. Press the room temperature button (usually marked with a wave or green indicator). Release the button when your cup is full.
- ചൂടുവെള്ളം വിതരണം ചെയ്യുന്നു (ചൈൽഡ് സേഫ്റ്റി ലോക്ക് ഉപയോഗിച്ച്):
Image: The dispenser's ample dispense height and deep drip tray are shown, accommodating various cup sizes.
- Place your cup under the hot water tap.
- To dispense hot water, simultaneously push the red child safety lock button inward and then press the hot water button (usually marked with steam or a red indicator).
- Release both buttons when your cup is full. The child safety lock will automatically re-engage.
- Empty Bottle Alert: The dispenser is equipped with an LED indicator light that illuminates when the 5-gallon water bottle is nearly empty, signaling that a replacement is needed.
മെയിൻ്റനൻസ്
- ഡ്രിപ്പ് ട്രേ ക്ലീനിംഗ്: The drip tray should be emptied and cleaned regularly to prevent overflow and maintain hygiene. Simply slide out the drip tray, empty any collected water, wash with mild soap and water, rinse thoroughly, and replace.
- ബാഹ്യ ശുചീകരണം: ഡിസ്പെൻസറിന്റെ പുറംഭാഗങ്ങൾ മൃദുവായ, ഡി-ടച്ച് ഉപയോഗിച്ച് തുടയ്ക്കുക.amp തുണി. ഫിനിഷിന് കേടുവരുത്തുന്ന ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
- ആന്തരിക വൃത്തിയാക്കൽ/ഡീസ്കലിംഗ്: Periodically, the internal water tanks may require cleaning or descaling. Refer to the full product manual for detailed instructions on this process, which typically involves using a food-grade cleaning solution.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| വെള്ളം വിതരണം ഇല്ല | Water bottle empty or not properly installed. | Replace water bottle or ensure probe is correctly seated. |
| വെള്ളം ആവശ്യത്തിന് ചൂടോ തണുപ്പോ ഇല്ല. | Heating/cooling switch off; unit recently plugged in. | Ensure switches are ON. Allow 15-30 minutes for water to reach desired temperature. |
| Empty bottle alert not working | സെൻസർ തകരാർ. | Verify bottle is empty. If issue persists, contact customer support. |
| വെള്ളം ചോരുന്നു | Water bottle cracked or probe not sealed correctly. | Check water bottle for damage. Re-seat the probe assembly. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Brio customer support.
സ്പെസിഫിക്കേഷനുകൾ
Image: The Brio 130SS water cooler with key dimensions, highlighting its streamlined design and no-plumbing requirement.
- മോഡൽ നമ്പർ: CLBL130SS
- നിറം: സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ
- മെറ്റീരിയൽ: കറുത്ത പ്ലാസ്റ്റിക്
- ശേഷി: 5 ഗാലൺ (3-5 ഗാലൺ കുപ്പികളുമായി പൊരുത്തപ്പെടുന്നു)
- ഇൻസ്റ്റലേഷൻ തരം: നില മ Mount ണ്ട് ചെയ്തു
- അളവുകൾ (ഏകദേശം): 44.3 x 15 x 14.3 ഇഞ്ച് (പാക്കേജ് അളവുകൾ)
- ഇനത്തിൻ്റെ ഭാരം: 39.5 പൗണ്ട്
- ശക്തി: 110-120V AC
- ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ: Water Cooler Dispenser, User Manual
വാറൻ്റിയും പിന്തുണയും
This Brio water cooler dispenser comes with a manufacturer's warranty. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Brio webസൈറ്റ്.
For technical assistance, troubleshooting, or to inquire about replacement parts, please contact Brio customer support. Contact information can typically be found on the product packaging, the official Brio website, or within the full user manual.
ഓൺലൈൻ ഉറവിടങ്ങൾ: You may find additional support and FAQs on the Brio webസൈറ്റ്: Visit the Brio Store
