FLEXISPOT Queen Size Adjustable Bed Frame with 10 Inch Gel Memory Foam Mattress User Manual

ആമുഖം

This manual provides essential instructions for the safe and efficient assembly, operation, and maintenance of your FLEXISPOT Queen Size Adjustable Bed Frame with 10 Inch Gel Memory Foam Mattress. Please read this manual thoroughly before use and retain it for future reference.

സുരക്ഷാ വിവരങ്ങൾ

• Do not exceed the weight capacity of 606 lbs (275 kg) for the bed frame.
• Exercise caution around pinch points when operating the adjustable bed frame to prevent injury.
• Ensure all power cords are clear and do not interfere with any adjustable bed mechanisms during operation.
• Always ensure the bed is in a flat position before attempting to lift or move it. Lifting by two people is recommended.
• Excessive pressure on the legs may cause damage.
• Remove all protective plastic covering before use.

ഘടകങ്ങൾ

Before assembly, verify that all parts are included. Do not discard any packing materials until assembly is complete. All electronics and components are located in boxes under the base or attached to the frame.

• Adjustable Bed Frame (pre-assembled sections)
• 10 ഇഞ്ച് ജെൽ മെമ്മറി ഫോം മെത്ത
• Input Power Cord (A) x1
• Transformer Power Supply (B) x1
• 6" + 6" Legs (C) x6
• Wireless Remote Control (D) x1
• Mattress Retainer Bar (E) x1

Figure 1: Illustration of adjustable bed frame components.

സജ്ജീകരണവും അസംബ്ലിയും

Follow these steps to assemble your adjustable bed frame. It is recommended to have two people for assembly due to the weight of the frame.

Step 1: Unpack and Position the Frame

• With the help of an assistant, place the carton on the floor in the desired location.
• Carefully open the carton and remove the adjustable bed frame.
• പിൻഭാഗം മുകളിലേക്ക് നോക്കുന്ന തരത്തിൽ ഉൽപ്പന്നം മറിച്ചിടുക. മടക്കിയ സൈഡ് റെയിലുകൾ കാൽ ഭാഗത്താണ്.
• മടക്കിവെച്ച റെയിലുകൾ ഇരുവശത്തും വിടർത്തി വെൽക്രോയിൽ ദൃഢമായി അമർത്തുക.

ഘട്ടം 2: കാലുകൾ ഇൻസ്റ്റാൾ ചെയ്യുക

• Install the six legs (C) firmly into the base of the frame. Screw the legs into the threaded holes on each corner of the adjustable base frame.

Step 3: Connect Power and Remote

• Extend the input power cord (A) and plug it into the transformer power supply (B).
• Connect the transformer power supply (B) to the control box. The control box is the black box attached to the bottom of the bed.
• Synchronize the remote control (D) with the control box. Ensure batteries are in the remote control (D). Find the black box mounted under the bed, locate the red circle indicating the button on the control box. Hold the button on the control for 3 seconds after plugging in the adjustable bed; the light will flash quickly. Then press any key on the remote control (D). When the light stops flashing, the match is successful.

Step 4: Install Mattress Retainer Bar

• Get the Mattress Retainer Bar (E) from packaging.
• Carefully insert the mattress retainer bar (E) into the 2 holes on the foot end of the bed base.

Step 5: Position the Mattress

• Place the 10-inch gel memory foam mattress onto the adjustable bed frame. The mattress will fully expand within 48 hours.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Adjusting Bed Positions

• The head and foot sections of the adjustable bed frame can be operated simultaneously using the wireless remote control.
• The head section can be raised up to 60 degrees, and the leg section can be raised up to 20 degrees.
• Use the arrow buttons on the remote to adjust the head and foot sections to your desired angle.

വിദൂര നിയന്ത്രണ സവിശേഷതകൾ

• The wireless remote control allows for instant adjustment of the bed's position.
• Refer to the remote control's diagram for specific button functions (e.g., head up/down, foot up/down).

Figure 2: Wired remote control for adjusting bed positions. The image shows the remote with buttons for head and foot adjustments, indicating the head can be raised to 60 degrees and the foot to 35 degrees.

മെയിൻ്റനൻസ്

മെത്ത പരിചരണം

• The memory foam mattress features a three-way zipper for easy removal of the cover.
• The mattress cover is machine washable. Follow the care instructions on the label to prevent damage.
• Ensure the non-slip fabric on the mattress stays firmly in place for a stable sleep experience.

ഫ്രെയിം കെയർ

• എല്ലാ കണക്ഷനുകളും ഫാസ്റ്റനറുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കാൻ പതിവായി പരിശോധിക്കുക.
• മോട്ടോർ, ഇലക്ട്രിക്കൽ ഘടകങ്ങൾ പൊടിയിൽ നിന്നും ഈർപ്പത്തിൽ നിന്നും മുക്തമായി സൂക്ഷിക്കുക.
• ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് ഫ്രെയിം വൃത്തിയാക്കുകamp തുണി. കഠിനമായ രാസവസ്തുക്കൾ ഒഴിവാക്കുക.

ട്രബിൾഷൂട്ടിംഗ്

Bed Not Responding to Remote

• Check if the remote control batteries are correctly installed and have sufficient power. Replace if necessary.
• Ensure the power cord is securely plugged into a working electrical outlet and the transformer power supply.
• Re-synchronize the remote control with the control box following the instructions in the Setup section.

മോട്ടോർ ശബ്ദം

• The bed frame uses a whisper-quiet motor. If unusual noises occur, check for any obstructions under the bed or around the motor mechanisms.
• Ensure all legs and frame connections are tight.

Uneven Mattress Expansion

• The mattress is compressed in a box and requires up to 48 hours to fully expand to its optimal comfort and support. Allow sufficient time for expansion.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി & പിന്തുണ

വാറൻ്റി വിവരങ്ങൾ

The FLEXISPOT 10 Inch Gel Memory Foam Mattress is designed with your safety in mind and features 10-year warranty coverage. It is free from fiberglass and certified by OEKO-TEX and CertiPUR-US for guaranteed safety and quality assurance.

ഉപഭോക്തൃ പിന്തുണ

For any questions, concerns, or assistance with your FLEXISPOT adjustable bed frame or mattress, please contact our customer support team. Refer to your product packaging or the official FLEXISPOT webഏറ്റവും പുതിയ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കായി സൈറ്റ്.