Philips Solar Motion Sensor Outdoor Light (Model 6944403330)

ആമുഖം

This manual provides essential information for the safe and efficient use of your Philips Solar Motion Sensor Outdoor Light. Please read these instructions carefully before installation and operation, and retain them for future reference.

ചിത്രം 1: The Philips Solar Motion Sensor Outdoor Light and its retail packaging. The light features a solar panel on top and a motion sensor on the front face.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The Philips Solar Motion Sensor Outdoor Light is designed for easy, wire-free installation. Ensure the light is placed in a location that receives direct sunlight for optimal charging.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select an outdoor area where the solar panel can receive maximum direct sunlight throughout the day. Avoid shaded areas.
2. ഡ്രില്ലിംഗ് പോയിന്റുകൾ അടയാളപ്പെടുത്തുക: Use the light fixture to mark the two drilling points on the wall.
3. തുളകൾ: Drill holes at the marked points. Insert the provided expansion screws into the holes.
4. വെളിച്ചം മൌണ്ട് ചെയ്യുക: Align the light with the expansion screws and secure it using the mounting screws.
5. ശുപാർശ ചെയ്യുന്ന ഉയരം: For optimal motion detection and light coverage, install the light at a recommended height of approximately 8.2 feet (2.5 meters).

ചിത്രം 2: A diagram illustrating the easy installation process. It shows the light being mounted to a wall with screws and provides dimensions for the 5.24-inch model (4.37 in height, 5.24 in width, 2.04 in depth).

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your Philips Solar Motion Sensor Outdoor Light features a Passive Infrared (PIR) motion sensor and multiple lighting modes for customizable outdoor illumination.

മോഷൻ സെൻസർ:

The PIR motion sensor accurately detects movements of humans, animals, and cars. It has a detection distance of 6-9 meters (approximately 19.7-29.5 feet) and a 120° detection angle, providing a 180° lighting angle for enhanced safety.

ചിത്രം 3: A visual representation of the motion sensor's detection range, showing a maximum sensing range of 29.53 feet and a 120° detection angle. The light provides 240 lumens at 7500K cool daylight when activated.

ലൈറ്റിംഗ് മോഡുകൾ:

The light offers three distinct nighttime lighting modes, selectable via a push button. The light comes set to Off initially. Press the button to cycle through the modes:

1. സെൻസർ മോഡ്: Press once. The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness (240 lumens) for 25 seconds, then turns off.
2. മങ്ങിയ മോഡ്: Press twice. The light stays on at 10% brightness (24 lumens) for 8 hours, then turns off. This mode does not react to motion.
3. ഡിം + സെൻസർ മോഡ്: Press three times. The light stays on at 3% brightness (8 lumens). When motion is detected, it brightens to 100% brightness (240 lumens) for 25 seconds, then returns to 3% brightness.
4. ഓഫ്: Press four times to turn the light off.

ചിത്രം 4: A visual guide to the three lighting modes: Sensor mode (100% brightness on motion), Dim mode (10% brightness always on for 8 hours), and Dim+Sensor mode (3% brightness, increasing to 100% on motion).

മെയിൻ്റനൻസ്

To ensure optimal performance and longevity of your Philips Solar Motion Sensor Outdoor Light, follow these simple maintenance guidelines:

• വൃത്തിയുള്ള സോളാർ പാനൽ: പതിവായി സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് സോളാർ പാനൽ തുടയ്ക്കുക.amp cloth to remove dust, dirt, and debris. A clean panel ensures efficient charging.
• ബാറ്ററി കെയർ: The light features a high-capacity 1200 mAh battery. Ensure the light receives adequate sunlight for charging, especially during shorter winter days, to maintain battery health.
• കാലാവസ്ഥ പ്രതിരോധം: The light is IP44 rated and constructed from durable ABS and AS polymers, designed to withstand heavy rain, high temperatures, and extreme weather conditions. No special weather-proofing is typically required.

ചിത്രം 5: The Philips Solar Light is shown installed on a wall during a rain shower, illustrating its water-resistant design and ability to perform in all weather conditions.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Philips Solar Motion Sensor Outdoor Light, refer to the following common problems and solutions:

• രാത്രിയിൽ ലൈറ്റ് കത്തുന്നില്ല:
  • Ensure the solar panel is clean and receiving direct sunlight for at least 6-8 hours daily.
  • Verify the light is not in the 'Off' mode. Cycle through the modes using the push button.
  • Check for any obstructions blocking the motion sensor.
• Light is Dim or Runtime is Short:
  • The battery may not be fully charged. Ensure the solar panel has sufficient direct sunlight exposure.
  • Cold weather can affect battery performance.
  • ചാർജിംഗ് കാര്യക്ഷമത വർദ്ധിപ്പിക്കുന്നതിന് സോളാർ പാനൽ വൃത്തിയാക്കുക.
• Motion Sensor Not Activating:
  • Confirm the light is in 'Sensor Mode' or 'Dim + Sensor Mode'.
  • Ensure the detection area is clear of obstructions.
  • Test the sensor by walking within its range (6-9 meters).
• Difficulty Identifying Current Mode:
  • To confirm the current mode, take the light into a dark room or cover the solar panel. Press the button once and observe the behavior. Repeat presses to cycle through and identify each mode.

സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the Philips Solar Motion Sensor Outdoor Light (Model 6944403330):

ചിത്രം 6: A comparison table highlighting key features of the Philips Solar-powered Wall Light, including brightness (240 Lm), LED units (120 LEDs), lighting modes (3), detection angle (120°), lighting range (29.53 ft), and running time (50 hrs).

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the product packaging or contact Philips customer service directly. Keep your purchase receipt as proof of purchase.