PetJoy 3 Dog Shock Collar User Manual

ആമുഖം

The PetJoy 3 Dog Shock Collar system is designed to assist in training up to three dogs simultaneously or individually. It features both automatic bark detection and remote-controlled training modes, including beep, vibration, and static stimulation. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure effective and safe use of the device.

സുരക്ഷാ വിവരങ്ങൾ

• This device is intended for training purposes only. Do not use it as a punishment tool.
• Not suitable for aggressive dogs. Consult a professional dog trainer if your dog exhibits aggressive behavior.
• Do not leave the collar on your dog for more than 12 hours per day to prevent skin irritation.
• നിങ്ങളുടെ നായയുടെ കഴുത്തിൽ പ്രകോപനത്തിന്റെയോ വ്രണങ്ങളുടെയോ ലക്ഷണങ്ങൾക്കായി പതിവായി പരിശോധിക്കുക. പ്രകോപനം ഉണ്ടായാൽ, ചർമ്മം സുഖപ്പെടുന്നതുവരെ ഉപയോഗം നിർത്തുക.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• Ensure proper fit; the collar should be snug but not overly tight.
• Always start with the lowest stimulation level and gradually increase as needed.

പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• 3 x കോളർ സ്ട്രാപ്പുകൾ
• 1 x Clicker
• 3 x Shock Collar Receivers
• 1 x റിമോട്ട് കൺട്രോൾ
• 2 x Charging Wires
• 1 x ലാനിയാർഡ്

Image: All components included in the PetJoy 3 Dog Shock Collar package.

ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the main components of your PetJoy training system.

Image: The PetJoy 3 Dog Shock Collar system, including three receiver collars and the remote control.

റിമോട്ട് കൺട്രോൾ

• ഡിസ്പ്ലേ സ്ക്രീൻ: Shows battery level, selected dog channel, mode, and intensity level.
• മോഡ് ബട്ടണുകൾ: Separate buttons for Beep, Vibration, and Static Stimulation.
• +/- ബട്ടണുകൾ: Adjust intensity levels for Vibration and Static Stimulation.
• ചാനൽ ബട്ടൺ: Switch between dog channels (1, 2, 3) or control all simultaneously.
• പവർ ബട്ടൺ: Turns the remote on/off and activates/deactivates Auto Mode on the receiver.

റിസീവർ കോളർ

• ബന്ധപ്പെടാനുള്ള പോയിൻ്റുകൾ: Deliver static stimulation. Ensure proper contact with the dog's skin.
• Auto Mode Sensor Hole: Detects barking for automatic correction.
• ചാർജിംഗ് പോർട്ട്: For recharging the receiver battery.
• LED സൂചകം: Shows power status, charging status, and mode activation.

സജ്ജീകരണ ഗൈഡ്

1. ഉപകരണങ്ങൾ ചാർജ് ചെയ്യുന്നു

Before first use, fully charge the remote control and all receiver collars. Use the provided charging cables.

• Connect the charging cable to the charging port on the remote and receivers.
• Plug the USB end into a USB power adapter (not included), computer, or power bank.
• The LED indicator on the receiver will show charging status (e.g., red while charging, green when full). The remote display will show battery icon filling up.
• Charging typically takes 2-3 hours. A full charge provides approximately 90 days of work time for the remote and 30 days for receivers.

Image: Charging the remote and receiver collars.

2. Pairing the Remote and Collars

Each receiver collar needs to be paired with the remote control.

1. വിദൂര നിയന്ത്രണം ഓണാക്കുക.
2. Select the desired channel (1, 2, or 3) for the collar you are pairing using the Channel button.
3. With the receiver collar turned off, press and hold its power button until the LED indicator flashes rapidly.
4. While the receiver LED is flashing, press any mode button (Beep, Vibration, or Shock) on the remote control.
5. If pairing is successful, the receiver LED will stop flashing and remain solid, and the remote will confirm the connection.
6. Repeat for additional collars, selecting a different channel for each.

3. കോളർ ഫിറ്റ് ചെയ്യുന്നു

Proper fit is crucial for effective and safe operation.

• Position the receiver on the underside of your dog's neck, directly below the chin.
• Ensure the contact points touch your dog's skin. You may need to trim long fur for better contact.
• Adjust the strap so it is snug, allowing only one finger to fit comfortably between the strap and your dog's neck.
• The collar should not be too loose, as this can cause inconsistent stimulation and rubbing. It should not be too tight, as this can restrict breathing or cause discomfort.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

പരിശീലന മോഡുകൾ

The PetJoy collar offers four training modes:

• ബീപ് മോഡ്: Delivers an audible tone. This is often used as a warning or positive reinforcement signal.
• വൈബ്രേഷൻ മോഡ്: Delivers a non-harmful vibration. Intensity is adjustable from 1-100 levels.
• ഷോക്ക് മോഡ്: Delivers a static stimulation. Intensity is adjustable from 1-100 levels. Always start at the lowest level and increase gradually.
• യാന്ത്രിക മോഡ്: The collar automatically detects and corrects barking. It has 5 sensitivity levels and a sequence of corrections (Beep, then Vibration, then Static Stimulation) if barking persists.

Image: Detailed activation sequences for the automatic bark detection mode.

Image: The collar's ability to operate in Auto Mode independently.

Controlling Multiple Dogs

The remote allows you to control up to three collars individually or all at once.

• ഉപയോഗിക്കുക ചാനൽ ബട്ടൺ on the remote to switch between Dog 1, Dog 2, Dog 3, or a universal channel to control all paired collars simultaneously.
• Ensure each collar is paired to a unique channel for individual control.

Image: Controlling multiple dogs with the remote.

Adjusting Sensitivity (Auto Mode)

To adjust the sensitivity of the automatic bark detection mode:

• With the receiver collar turned on, quickly press its power button 3 times.
• The LED indicator will flash a certain number of times to indicate the current sensitivity level (1-5 flashes).
• Continue pressing the power button 3 times in quick succession to cycle through the 5 sensitivity levels. Level 1 is the least sensitive, and Level 5 is the most sensitive.
• Select a sensitivity level appropriate for your dog's barking habits and environment.

Activating/Deactivating Auto Mode

You can turn the automatic bark detection mode on or off via the remote control.

• Ensure the remote and receiver are paired and within range.
• Press and hold the remote control's power button.
• You will hear the receiver beep once to confirm Auto Mode is turned ON, or twice to confirm it is turned OFF.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

• Regularly clean the receiver collar and contact points with a damp തുണി.
• Ensure the contact points are free of dirt, debris, or corrosion.
• കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകൾ ഉപയോഗിക്കരുത്.

ബാറ്ററി കെയർ

• Charge the devices fully before long periods of inactivity.
• തണുത്തതും ഉണങ്ങിയതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
• ബാറ്ററി ലൈഫിനെ ബാധിച്ചേക്കാവുന്ന, ഉയർന്ന താപനില ഒഴിവാക്കുക.

വാട്ടർപ്രൂഫിംഗ്

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This makes it suitable for use in rainy conditions or during swimming.

Image: The collar's IPX7 waterproof capability.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

The PetJoy 3 Dog Shock Collar comes with a 2 വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ, സാധാരണ ഉപയോഗത്തിലുള്ള നിർമ്മാണ വൈകല്യങ്ങളും തകരാറുകളും ഉൾക്കൊള്ളുന്നു.

For detailed warranty information, technical support, or any inquiries, please refer to the official user guide or contact PetJoy customer service.

ഔദ്യോഗിക ഉപയോക്തൃ ഗൈഡ് (PDF): ഇവിടെ ഡൗൺലോഡ് ചെയ്യുക

PetJoy Brand Store: സ്റ്റോർ സന്ദർശിക്കുക