Anderic MRAC06S1M

Anderic MRAC06S1M Ceiling Fan Receiver Instruction Manual

Model: MRAC06S1M

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Anderic MRAC06S1M is a replacement ceiling fan receiver specifically designed for use with Harbor Breeze Mazon ceiling fans. This receiver facilitates the remote control functionality of your ceiling fan, managing fan speeds and light operation. It is engineered for a plug-and-play installation, connecting directly into the fan's motor assembly via a square plug connector.

This receiver is compatible with various Harbor Breeze Mazon models, including 0807421, 2599776, 1059534, MZ44WW3LR, MZ44MBLK3LR, and others. It also works seamlessly with existing Anderic remote models such as RRTR214D, A25-FA0138, KUJCE10311, TR214B, KUJCE10712, TR214A, KUJCE10610, and 2BB78ITLF304C.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

പാക്കേജ് ഉള്ളടക്കം

Note: Remote control is not included and must be purchased separately if needed. This receiver is designed to work with existing compatible remotes.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The Anderic MRAC06S1M receiver is designed for a straightforward plug-and-play installation into compatible Harbor Breeze Mazon ceiling fans. Ensure your fan's existing receiver uses a square plug connector for direct replacement.

പ്രീ-ഇൻസ്റ്റലേഷൻ ചെക്ക്‌ലിസ്റ്റ്:

  1. Verify that your ceiling fan model is listed as compatible or uses a square plug connector for its receiver.
  2. Ensure you have the necessary tools (e.g., screwdriver, wire strippers if any wiring adjustments are needed, though typically not for plug-and-play).
  3. Confirm power is OFF at the circuit breaker before proceeding.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

  1. പവർ വിച്ഛേദിക്കുക: Turn off the power to the ceiling fan at the main circuit breaker. Verify power is off using a voltagഇ ടെസ്റ്റർ.
  2. Access Fan Housing: Carefully lower the canopy or access the motor housing of your ceiling fan where the existing receiver is located.
  3. Remove Old Receiver: Disconnect the existing receiver from the fan's wiring. Note the orientation and connection points if possible, though the square plug design simplifies this.
  4. Install New Receiver: Connect the Anderic MRAC06S1M receiver into the fan's motor assembly. The square plug connector should fit directly into the corresponding port. Ensure it is seated firmly.
  5. സുരക്ഷിത റിസീവർ: Carefully tuck the receiver and wires back into the fan housing, ensuring no wires are pinched.
  6. പവർ പുന ore സ്ഥാപിക്കുക: Replace the fan canopy and turn the power back on at the circuit breaker.
  7. ടെസ്റ്റ് പ്രവർത്തനം: Use your compatible remote control to test the fan speeds and light operation.
ഫ്രണ്ട് view of the Anderic MRAC06S1M ceiling fan receiver with wires and square connector.

ചിത്രം 1: മുൻഭാഗം view of the Anderic MRAC06S1M receiver, showing its compact design and integrated wiring with the square plug connector.

കോണാകൃതിയിലുള്ളത് view of the Anderic MRAC06S1M receiver, highlighting the square plug connector.

ചിത്രം 2: കോണാകൃതിയിലുള്ളത് view of the receiver, clearly showing the distinctive square plug connector essential for plug-and-play compatibility with Harbor Breeze Mazon fans.

തിരികെ view of the Anderic MRAC06S1M receiver showing product label with model number and electrical specifications.

ചിത്രം 3: പിന്നിലേക്ക് view of the receiver, displaying the product label with model number MRAC06S1M-LD-F0, input voltage (AC120V 60Hz), and maximum load ratings for motor and light.

വശം view of the Anderic MRAC06S1M receiver showing capacitor details and QC pass sticker.

ചിത്രം 4: വശം view of the receiver, showing the capacitor specifications (5+6UF/250V) and a QC Pass sticker, indicating quality control inspection.

അനുയോജ്യതയെക്കുറിച്ചുള്ള പ്രധാന കുറിപ്പ്:

This receiver is designed for fans where the receiver connects directly into the motor assembly with a square plug. If your existing receiver connects at the canopy with standard wire connections (individual wires that need to be spliced or connected via wire nuts), this MRAC06S1M receiver will അല്ല be a plug-and-play replacement and may not be compatible without significant modification.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the Anderic MRAC06S1M receiver is correctly installed, it will enable remote control functionality for your ceiling fan. This receiver is designed to work with specific Anderic and compatible remote models.

Compatible Remote Controls:

The MRAC06S1M receiver is fully compatible with the following remote control models:

Note: The TR214D remote control is often required for initial pairing or full functionality and is not included with the receiver.

Pairing the Remote (if necessary):

Most compatible remotes will automatically pair or have a simple pairing procedure. Refer to your specific remote control's instruction manual for detailed pairing steps. Typically, this involves:

  1. Ensure power to the fan is on.
  2. Within a short timeframe (e.g., 30 seconds) of restoring power, press and hold a specific button on the remote (often a "Learn" button, "Fan Off" button, or a combination of buttons) until the fan light blinks or the fan responds.
  3. Test all functions (fan speeds, light on/off, dimming if applicable).

മെയിൻ്റനൻസ്

The Anderic MRAC06S1M receiver is a sealed electronic component and requires minimal maintenance. Follow these guidelines to ensure its longevity:

ട്രബിൾഷൂട്ടിംഗ്

If you experience issues with your ceiling fan after installing the MRAC06S1M receiver, refer to the following common problems and solutions:

Problem: Fan or Light Does Not Respond to Remote

Problem: Fan Operates Intermittently or Incorrectly

Problem: Light Flickers or Does Not Turn On

If problems persist after following these steps, consult a qualified electrician or contact Anderic customer support.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡലിൻ്റെ പേര്MRAC06S1M
നിർമ്മാതാവിൻ്റെ മോഡൽ നമ്പർ.MRAC06S1M-LD-F0
ബ്രാൻഡ്ആൻഡറിക്
ഇൻപുട്ട് വോളിയംtageAC120V 60Hz
Max Load Motor1.0എ
Max Load Light (Incandescent)100W
Max Load Light (LED)60W
പ്രവർത്തന താപനില (Ta)40°C
നിറംകറുപ്പ്
ഇനത്തിൻ്റെ ഭാരം3.36 ഔൺസ്
കൺട്രോളർ തരംButton Control (via compatible remote)
പ്രത്യേക ഫീച്ചർPlug-in-play, Must pair with TR214D remote (not included)
യു.പി.സി191713654939

വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support regarding your Anderic MRAC06S1M Ceiling Fan Receiver, please contact Anderic directly or refer to their official webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Anderic Official Webസൈറ്റ്: www.anderic.com

For further assistance, you may also refer to the product page on Amazon: ആമസോൺ ഉൽപ്പന്ന പേജ്

അനുബന്ധ രേഖകൾ - MRAC06S1M

പ്രീview ആൻഡറിക് RRTX012 & FD40-H02R സീലിംഗ് ഫാൻ റിമോട്ട് കൺട്രോൾ നിർദ്ദേശങ്ങൾ
ആൻഡറിക് RRTX012, FD40-H02R സീലിംഗ് ഫാൻ റിമോട്ട് കൺട്രോളുകൾക്കായുള്ള സമഗ്ര ഗൈഡ്, ഇൻസ്റ്റാളേഷൻ, സജ്ജീകരണം, ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ, റിമോട്ട് ജോടിയാക്കൽ, ഫാൻ വേഗത, ലൈറ്റിംഗ്, ടൈമറുകൾ, ഹോം ഷീൽഡ്, വാക്ക് എവേ ലൈറ്റ് ഡിലേ പോലുള്ള പ്രത്യേക സവിശേഷതകൾ എന്നിവയുടെ വിശദമായ പ്രവർത്തനം എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ആൻഡറിക് RRTX012 റിമോട്ട് കൺട്രോൾ ഓപ്പറേറ്റിംഗ് നിർദ്ദേശങ്ങൾ
ആൻഡറിക് RRTX012 സീലിംഗ് ഫാൻ റിമോട്ട് കൺട്രോൾ, കവറിംഗ് വാൾ ബ്രാക്കറ്റ് ഇൻസ്റ്റാളേഷൻ, റിമോട്ട് സജ്ജീകരണം, ബാറ്ററി ഇൻസ്റ്റാളേഷൻ, ജോടിയാക്കൽ, ഫാൻ വേഗത, പ്രകൃതിദത്ത കാറ്റ്, ലൈറ്റ് ഫംഗ്‌ഷനുകൾ, വാക്ക്-എവേ ലൈറ്റ് കാലതാമസം, ഹോം ഷീൽഡ്, സ്ലീപ്പ് ടൈമർ, പവർ ഓഫ് മെമ്മറി എന്നിവയുടെ വിശദമായ പ്രവർത്തനം എന്നിവയ്ക്കുള്ള പ്രവർത്തന നിർദ്ദേശങ്ങൾ.
പ്രീview ആൻഡറിക് FAN9T, FAN28R/UC7067FCRX എന്നിവയ്ക്കുള്ള ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
റിസീവർ വയറിംഗ്, റിമോട്ട് പെയറിംഗ്, ബാറ്ററി ഇൻസ്റ്റാളേഷൻ എന്നിവയുൾപ്പെടെ, ആൻഡെറിക് FAN9T, FAN28R/UC7067FCRX സീലിംഗ് ഫാൻ റിമോട്ട് കൺട്രോൾ സിസ്റ്റത്തിനായുള്ള വിശദമായ ഇൻസ്റ്റലേഷൻ ഗൈഡ്.
പ്രീview Anderic UC7058RY Ceiling Fan Receiver Installation Guide
Detailed installation and pairing instructions for the Anderic UC7058RY ceiling fan receiver. Includes notes on compatibility with Anderic RR7078TR and RR7083TR remotes. Provides step-by-step guidance for setup and remote synchronization.
പ്രീview ആൻഡറിക് UC7301R / RR7222T സീലിംഗ് ഫാൻ റിമോട്ട് & റിസീവർ ഇൻസ്റ്റലേഷൻ ഗൈഡ്
ആൻഡറിക് UC7301R സീലിംഗ് ഫാൻ റിസീവറിനും RR7222T റിമോട്ട് കൺട്രോളിനുമുള്ള ഘട്ടം ഘട്ടമായുള്ള ഇൻസ്റ്റാളേഷൻ നിർദ്ദേശങ്ങൾ, പ്രധാനപ്പെട്ട സുരക്ഷാ പോയിന്റുകൾ, റിസീവർ ഇൻസ്റ്റാളേഷൻ, റിമോട്ട് ജോടിയാക്കൽ, ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ANDERIC® RRTX001R റിമോട്ട് കൺട്രോൾ യൂസർ മാനുവൽ
ANDERIC® RRTX001R റിമോട്ട് കൺട്രോളിനായുള്ള ഉപയോക്തൃ മാനുവൽ, ബാറ്ററി ഇൻസ്റ്റാളേഷൻ, ജോടിയാക്കൽ നിർദ്ദേശങ്ങൾ, ഉൽപ്പന്ന പ്രവർത്തനങ്ങൾ, വാൾ മൗണ്ട് ബ്രാക്കറ്റ് ഇൻസ്റ്റാളേഷൻ എന്നിവ വിശദമാക്കുന്നു.