TNICER G1 അൾട്രാ മോട്ടോർസൈക്കിൾ ഇന്റർകോം സിസ്റ്റം യൂസർ മാനുവൽ

1. ആമുഖം

The TNICER G1 Ultra is an advanced motorcycle intercom system designed to enhance your riding experience with seamless communication and entertainment. This device features a Bluetooth 5.2 dual-chip, Mesh 3.0 technology, and supports communication for up to 8 riders over a 1km range. It includes DSP&CVC dual noise cancellation for clear audio, FM radio, music sharing capabilities, Hi-Fi audio quality, and an IP65 waterproof and dustproof design. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting.

Image: TNICER G1 Ultra Intercom with dual chip and Bluetooth, highlighting its high performance.

ചിത്രം: കഴിഞ്ഞുview of TNICER G1 Ultra features including Bluetooth 5.2 Dual Chip, 8-person Mesh & 6-person Bluetooth Intercom, Music Sharing & FM, 3.5mm Speaker Exchangeable, IP65 Waterproof + 1000mAh battery.

2. പാക്കേജ് ഉള്ളടക്കം

Before proceeding with installation, please verify that all items listed below are included in your package:

• G1 Ultra Main Unit
• Speaker & Boom Microphone
• 3.5mm Universal Jack
• അടിസ്ഥാന പ്ലേറ്റ്
• 3M ഇരട്ട-വശങ്ങളുള്ള ടേപ്പ്
• 3M Single-Sided Tape
• സ്പീക്കർ വെൽക്രോ
• സ്പീക്കർ സ്പേസർ
• മൈക്രോഫോൺ വെൽക്രോ
• മെറ്റൽ ക്ലിപ്പ്
• യുഎസ്ബി ചാർജിംഗ് കേബിൾ
• ഉപയോക്തൃ മാനുവൽ

Image: Visual representation of all items included in the TNICER G1 Ultra package.

3. സജ്ജീകരണം

3.1. ഹെൽമെറ്റ് ഇൻസ്റ്റാളേഷൻ

The G1 Ultra offers two methods for helmet installation: using a metal clip or double-sided tape. Choose the method that best suits your helmet type and preference.

Image: Illustration of the two installation methods: using double-sided tape and using a metal clip.

Method 1: Using the Metal Clip

1. Peel off the protective film from the single-sided mat and attach it to the base plate.
2. Insert the metal clip into the base plate.
3. Slide the base plate with the metal clip onto the bottom edge of your helmet.
4. Push the G1 Ultra main unit downwards into the base plate until it clicks into place.

Method 2: Using Double-Sided Tape

1. Peel off the protective film from the double-sided mat and attach it to the base plate.
2. Firmly attach the base plate with the double-sided tape to a flat surface on your helmet.
3. Push the G1 Ultra main unit downwards into the base plate until it clicks into place.

3.2. സ്പീക്കറും മൈക്രോഫോണും സ്ഥാപിക്കൽ

Install the speakers and microphone inside your helmet for optimal audio quality and communication.

1. Attach the speaker Velcro pads to the inside of your helmet where your ears will be positioned.
2. Attach the speakers to the Velcro pads. Ensure they are centered over your ears for the best sound.
3. For full-face helmets, use the soft microphone. For jet helmets, use the hard boom microphone. Attach the microphone Velcro pad to the inside of the helmet near your mouth.
4. Connect the speaker and microphone cables to the G1 Ultra main unit. Ensure the 3.5mm jack is fully inserted. The earphone jack may be stiff, so insert it firmly.
5. Route the cables neatly under the helmet padding to avoid discomfort and ensure they are not pinched.

3.3. Initial Bluetooth Pairing (Phone)

Pair your G1 Ultra with your smartphone to enable music playback, GPS navigation, and phone calls.

1. Ensure your G1 Ultra is powered off.
2. Press and hold the "multifunction" button on the G1 Ultra until the red and blue lights flash alternately to enter Bluetooth pairing mode.
3. നിങ്ങളുടെ സ്മാർട്ട്‌ഫോണിൽ, ബ്ലൂടൂത്ത് ക്രമീകരണങ്ങളിലേക്ക് പോയി ലഭ്യമായ ഉപകരണങ്ങൾക്കായി തിരയുക.
4. Select "G1 Ultra" from the list to connect. A successful connection will be indicated by a slow flashing blue light on the G1 Ultra.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1. പവർ ഓൺ/ഓഫ്

• പവർ ഓൺ: Press and hold the power button for approximately 3 seconds until the indicator light turns on.
• പവർ ഓഫ്: ഇൻഡിക്കേറ്റർ ലൈറ്റ് ഓഫ് ആകുന്നതുവരെ ഏകദേശം 3 സെക്കൻഡ് നേരത്തേക്ക് പവർ ബട്ടൺ അമർത്തിപ്പിടിക്കുക.

4.2. Mesh 3.0 Intercom Communication

The G1 Ultra features Mesh 3.0 intelligent network technology, allowing up to 8 riders to communicate freely over a 1km range. It supports a decentralized structure, enabling riders to join and leave the group without disrupting the connection.

1. Ensure all G1 Ultra units are powered on.
2. Press the intercom button on all devices simultaneously to activate Mesh networking. The intercom indicator light will show a rapid green flash.
3. Once pairing is complete, the green light will remain on, and you can start chatting directly.
4. To temporarily stop intercom communication, short press the power button on any device. To resume, short press the power button again.

Image: Visual representation of Mesh 3.0 communication, showing up to 8 riders connected over a 1km range.

4.3. Bluetooth 5.2 Intercom & Multitasking

The G1 Ultra's Bluetooth 5.2 dual-chip design allows for real-time communication for up to 6 riders within a 1km range, even while simultaneously enjoying music, FM radio, or GPS navigation.

• ഒരേസമയം ഉപയോഗം: The dual-chip independently processes music/navigation and calls, allowing you to enjoy background audio while communicating.
• മുൻഗണനാ മാനേജ്മെന്റ്: When a call starts, the music volume will automatically adjust to prioritize the conversation.
• യാന്ത്രിക പുനഃസംയോജനം: If communication is temporarily interrupted due to obstacles or interference, the device will automatically reconnect once back within range.

Image: G1 Ultra Bluetooth 5.2 Dual Chip, illustrating independent processing for music/navigation and calls, enabling multitasking.

4.4. Music Sharing & FM Radio

Enhance your riding entertainment with integrated music sharing and FM radio functions.

• സംഗീതം പങ്കിടൽ: In the 2-person music sharing mode, two riders can listen to the same music while maintaining intercom communication.
• എഫ്എം റേഡിയോ: The built-in high-sensitivity FM receiver supports the 76-108MHz frequency band, allowing you to receive local music and news broadcasts in real-time. Multiple users can listen to the same FM channel and converse simultaneously.
• ഓഡിയോ നിലവാരം: A professional audio decoder ensures clear and rich sound quality for music and broadcasts. Intelligent audio mixing balances background music and voice calls.

Note: Simultaneous music, FM, and intercom communication is not supported.

Image: Dual listening function allowing two people to enjoy the same music while talking.

Image: Riders listening to FM radio and communicating, showing the 76-108MHz wideband FM support.

4.5. Noise Cancellation & Audio Quality

The G1 Ultra integrates DSP+CVC dual noise cancellation technology and high-fidelity speakers for superior audio performance.

• Dual Noise Cancellation: DSP+CVC technology, combined with a high-density microphone sponge, effectively eliminates wind noise and engine sounds during riding.
• വോയ്‌സ് പിക്കപ്പ് മായ്‌ക്കുക: A new windproof microphone array accurately captures human voice, ensuring clear communication even at high speeds.
• Hi-Fi Speakers: Built-in 40mm large-diameter Hi-Fi speakers reproduce powerful stereo sound, making music and calls clear and comfortable.
• ഒപ്റ്റിമൈസ് ചെയ്ത ശബ്ദം: A professional audio processing chip optimizes sound quality in real-time, transmitting human voices naturally. Innovative acoustic structure design suppresses echo, significantly improving voice recognition in multi-person conversations.

Image: Illustration of DSP+CVC 12.0 Noise Suppression and high-density microphone sponge for excellent noise cancelling effect.

Image: Hi-Fi Grade Clear Sound, showing a 40mm large driver unit and high-resolution audio technology for faithful sound reproduction.

4.6. Third-Party Intercom Compatibility & Voice Assistant

The G1 Ultra supports universal Bluetooth protocols, allowing connection with one third-party intercom unit or GPS device (note: some models may have limitations). It features a smart voice system with switchable Japanese and English voice prompts for user-friendly operation.

Image: Connectivity Compatibility Section, showing connection with smartphones, GPS, and other intercoms. Note: Only one third-party device can be connected; multiple TNICER devices are supported.

5. പരിപാലനം

5.1. ബാറ്ററി ചാർജിംഗ്

The G1 Ultra is equipped with a high-performance 1000mAh lithium polymer battery, providing up to 25 hours of music playback, 22 hours of talk time, and 300 hours of standby time.

• ചാർജിംഗ് സമയം: Approximately 2 hours (from 0% to full charge).
• ചാർജിംഗ് സൂചകം: Red light indicates charging; blue light indicates fully charged.
• പ്രധാനപ്പെട്ടത്: Please use the included USB charging cable and a charging adapter of 5V/1A or less. Using an adapter with higher voltage/current may damage the device.

Image: 1000mAh Large Capacity Battery, showing charging time of 2 hours for up to 25 hours of continuous use.

5.2. Waterproof and Dustproof

The G1 Ultra features an IP65-rated waterproof and dustproof design, preventing water and dust ingress through its multi-layer structure. This ensures reliable operation even in heavy rain or dusty environments.

• ജാഗ്രത: Waterproof performance may degrade over long-term use.
• ശുപാർശ: Avoid using the device in heavy rain. After use, promptly wipe the device dry.

Image: G1 Ultra operating reliably in rainy conditions, demonstrating its IP65 waterproof and dustproof performance.

6. പ്രശ്‌നപരിഹാരം

No sound from earphones or microphone, or sound only from one side.

• പരിഹാരം 1: Ensure the cable connector is fully inserted into the main unit's jack. Improper insertion can lead to no sound or sound from only one side. The earphone jack may be stiff, so insert it firmly.
• പരിഹാരം 2: Try plugging and unplugging the earphones several times.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or any inquiries regarding your TNICER G1 Ultra, please refer to the contact information provided on the product packaging or visit the official TNICER webവാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.