ആമുഖം
This manual provides instructions for the safe and effective use of your Heaflex D10 Series Dog Training Collar. This system is designed to assist in training up to three dogs using various modes.
സുരക്ഷാ വിവരങ്ങൾ
- ഉൽപ്പന്നം ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും വായിക്കുക.
- ഈ ഉപകരണം നായ്ക്കളെ പരിശീലിപ്പിക്കുന്നതിന് മാത്രമുള്ളതാണ്.
- ഒരു ദിവസം 12 മണിക്കൂറിൽ കൂടുതൽ നിങ്ങളുടെ നായയിൽ കോളർ വയ്ക്കരുത്.
- നിങ്ങളുടെ നായയുടെ കഴുത്തിൽ പ്രകോപനത്തിന്റെയോ വ്രണങ്ങളുടെയോ ലക്ഷണങ്ങൾക്കായി പതിവായി പരിശോധിക്കുക.
- റിമോട്ട് കൺട്രോൾ വാട്ടർപ്രൂഫ് അല്ല.
- Use the shock function responsibly and always start at the lowest level.
പാക്കേജ് ഉള്ളടക്കം
- വിദൂര ട്രാൻസ്മിറ്റർ
- Receiver Collar(s) (Quantity: 3 for this model)
- Adjustable Nylon Collar Strap(s)
- യുഎസ്ബി ടൈപ്പ്-സി ചാർജിംഗ് കേബിൾ
- ടെസ്റ്റ് ലൈറ്റ് ടൂൾ
- കോൺടാക്റ്റ് പോയിന്റുകൾ (ഹ്രസ്വവും ദീർഘവും)
- Silicone Conductive Caps
ഉൽപ്പന്നം കഴിഞ്ഞുview

Image: The Heaflex D10 Series Dog Training Collar set, including the remote transmitter and three receiver collars with adjustable straps.
വിദൂര ട്രാൻസ്മിറ്റർ
- Touchscreen display with battery indicator.
- Buttons for Beep, Vibration, and Shock modes.
- Channel selection for up to 3 dogs.
- Safety lock function to prevent accidental activation.
റിസീവർ കോളർ
- ഒതുക്കമുള്ളതും ഭാരം കുറഞ്ഞതുമായ ഡിസൈൻ.
- IPX7 വാട്ടർപ്രൂഫ് റേറ്റിംഗ്.
- റീചാർജ് ചെയ്യാവുന്ന ബാറ്ററി.
- Adjustable collar strap (7-26 inches, suitable for dogs 5-120 lbs).
സജ്ജമാക്കുക
1. ഉപകരണങ്ങൾ ചാർജ് ചെയ്യുന്നു
Ensure both the remote transmitter and receiver collars are fully charged before first use.

Image: The remote and receiver collar connected to a USB Type-C charging cable.
- Connect the USB Type-C charging cable to the charging port on both the remote and the receiver.
- ഒരു ഫുൾ ചാർജിന് ഏകദേശം 2.5 മണിക്കൂർ എടുക്കും.
- The receiver has a standby time of up to 35 days, and the remote up to 45 days.
2. Attaching the Receiver to the Collar Strap
The receiver unit needs to be threaded onto the adjustable nylon collar strap.
Video: A demonstration of how to attach the receiver to the collar strap and pair the devices.
- Slide one end of the collar strap through the loop on one side of the receiver.
- Thread the strap back through the buckle, ensuring it is secure.
- Repeat for the other side of the receiver.
- Ensure the contact points are facing inwards towards the dog's neck.
- Attach the appropriate length contact points and silicone caps based on your dog's coat length.
3. Fitting the Collar on Your Dog
Proper fit is essential for effectiveness and comfort.

Image: Visual guide showing different dog sizes and the adjustable collar range.
- The collar should fit snugly, allowing two fingers to fit between the strap and your dog's neck.
- The contact points must touch your dog's skin to deliver stimulation effectively.
- Adjust the strap length to ensure a secure but comfortable fit.
- This collar is suitable for dogs weighing 5 to 120 pounds, with neck sizes ranging from 7 to 26 inches.
4. Pairing the Remote and Receiver
Follow these steps to pair your remote with the receiver collar(s).
Video: A demonstration of how to pair the remote with the receiver collar.
- റിമോട്ട് ട്രാൻസ്മിറ്റർ ഓണാക്കുക.
- Long press the power button on the receiver collar until the green light flashes.
- While the receiver light is flashing, press any training mode button (Beep, Vibration, or Shock) on the remote.
- The receiver light will stop flashing and remain solid green, indicating successful pairing.
- To pair additional collars (up to 3), select a different channel on the remote and repeat the process for each additional receiver.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
പരിശീലന മോഡുകൾ
The Heaflex D10 Series offers three distinct training modes:

Image: Icons representing the three training modes: Shock, Beep, and Vibration.
- ബീപ് മോഡ്: Delivers an audible tone. This is often used as a warning or for positive reinforcement.
- വൈബ്രേഷൻ മോഡ്: Provides a gentle to strong vibration. Levels 1-16 are available.
- ഷോക്ക് മോഡ്: Delivers a static stimulation. Levels 1-16 are available. Use with caution and always start at the lowest level.
Adjusting Intensity Levels
Both Vibration and Shock modes have 16 adjustable intensity levels.
- Use the up/down buttons on the remote's touchscreen to select the desired intensity level for Vibration or Shock.
- Always start with the lowest level and gradually increase until your dog responds.
സുരക്ഷാ ലോക്ക് പ്രവർത്തനം
The remote features a safety lock to prevent accidental activation.
- To activate the safety lock, press the lock icon on the remote.
- To unlock, press the lock icon again.
- The remote enters hibernate mode after 30 seconds of inactivity and must be unlocked to resume use.
Multi-Dog Training
The remote can control up to three receiver collars simultaneously.
Video: A demonstration of the remote's multi-channel capability for training multiple dogs.
- Use the channel selection button on the remote to switch between Dog 1, Dog 2, and Dog 3.
- Each dog's collar must be paired to a unique channel.
- This allows for individual control and customized training for each dog.
മെയിൻ്റനൻസ്
വൃത്തിയാക്കൽ
- Regularly clean the receiver collar and contact points with a damp തുണി.
- Ensure the charging port cover is securely closed when not charging to maintain waterproofing.
ബാറ്ററി കെയർ
- ബാറ്ററി ഇൻഡിക്കേറ്റർ കുറഞ്ഞ പവർ കാണിക്കുമ്പോൾ ഉപകരണങ്ങൾ ചാർജ് ചെയ്യുക.
- Avoid extreme temperatures for storage to prolong battery life.
വാട്ടർപ്രൂഫിംഗ്

Image: A dog wearing the collar near water, illustrating its IPX7 waterproof feature.
- The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes.
- This allows for training in wet conditions, including rain or swimming.
- Important: The remote control is NOT waterproof. ഉണക്കി സൂക്ഷിക്കുക.
ട്രബിൾഷൂട്ടിംഗ്
Collar not responding to remote
- Check if both devices are powered on.
- Ensure the remote is not in safety lock mode.
- Verify that the remote and receiver are paired to the same channel.
- Recharge both devices if battery levels are low.
- Ensure you are within the 2600ft operating range.
Dog not responding to stimulation
- Check the collar fit; contact points must touch the skin.
- Adjust the contact points to a longer size if your dog has thick fur.
- Increase the intensity level gradually.
- Use the included test light tool to confirm the shock function is working.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ഹീഫ്ലെക്സ് |
| മോഡൽ | D10 സീരീസ് |
| പരിശീലന മോഡുകൾ | Beep, Vibration (1-16 levels), Shock (1-16 levels) |
| പരിധി | 2600 അടി വരെ (തടസ്സമില്ലാതെ) |
| Multi-Dog Support | 3 നായ്ക്കൾ വരെ |
| റിസീവർ വാട്ടർപ്രൂഫ് റേറ്റിംഗ് | IPX7 |
| ചാർജിംഗ് സമയം | Approximately 2.5 hours (USB Type-C) |
| Remote Standby Time | 45 ദിവസം വരെ |
| Receiver Standby Time | 35 ദിവസം വരെ |
| കോളർ വലിപ്പം | 7-26 ഇഞ്ച് |
| ശുപാർശ ചെയ്യുന്ന നായ ഭാരം | 5-120 പൗണ്ട് |
വാറൻ്റിയും പിന്തുണയും
The Heaflex D10 Series Dog Training Collar comes with a 2-year warranty. For any questions, issues, or support needs, please contact Heaflex customer service.
ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: Refer to the product packaging or the official Heaflex webഏറ്റവും പുതിയ പിന്തുണ വിശദാംശങ്ങൾക്കായുള്ള സൈറ്റ്.



